16mm Fascia Board (Mamouth) Anthracite
If you are looking for a White Replacement Fascia Board, our high-quality product ticks all the boxes. It resists the elements, is ultra-low maintenance and manufactured from robust uPVC.
16mm Fascia Board (Mamouth) White
If you are looking for a White Replacement Fascia Board, our high-quality product ticks all the boxes. It resists the elements, is ultra-low maintenance and manufactured from robust uPVC.
3.5mm Drywall Metal Stud Plasterboard Screws (Box of 1000 Screws)
Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. • Phillips No.2 recess for a positive drive • Bugle head to reduce likelihood of damaging the board surface • 25° super sharp point for ease of penetration • 60° twin-thread offers excellent pull-out values and insertion speed Technical Specifications Thread Diameter (mm) - 3.5 Recess Type - Phillips Material - Carbon Steel Finish - Black Phosphate Corrosion Rating (1-5) 1 - Clean dry & low humidity environments
Corner Trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. To Enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any pvc fascia installation should be glued to the board and the other side. COMES IN 3 COLOURS
Upvc roofline products are well suited to replace old timber fascias and soffits, our range includes facsias, soffits, capping board, ventilators, and trims. Ideal for a maintenance free home, no need to paint. Suitable to all types or home & commercial use
High Grade strength concrete step. Steps cast using 30N concrete in steel mould, with all exposed surfaces finished smooth. Available in various lengths. What is “granolithic concrete” Granolithic concrete (often just “grano”) is a fine-grade concrete / mortar composed of cement, sand, and a hard, fine aggregate (commonly granite or limestone) rather than the coarse gravel used in regular concrete. Because of this mix, granolithic concrete produces a dense, hard-wearing, abrasion-resistant surface — more durable than typical sand/cement screeds or ordinary concrete in terms of resisting wear, impact and heavy traffic. The finish can be very smooth (trowelled, floated) or textured (for slip resistance), depending on application and finishing method. Because of these properties, granolithic concrete is commonly used for floors, pavements, industrial sites, and—importantly—external steps or areas subject to heavy wear.
45mm Architrave is suitable for window and door trims and comes in three colours, Anthracite, White and Rosewood. These all come in 5m lengths
4mm Drywall Metal Stud Plasterboard Screws (Box of 1000 Screws)
Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. • Phillips No.2 recess for a positive drive • Bugle head to reduce likelihood of damaging the board surface • 25° super sharp point for ease of penetration • 60° twin-thread offers excellent pull-out values and insertion speed Technical Specifications Thread Diameter (mm) - 4 Recess Type - Phillips Material - Carbon Steel Finish - Black Phosphate Corrosion Rating (1-5) 1 - Clean dry & low humidity environments
5 Minute Multi Purpose Smooth Finish Filler - 600ml
Fill cracks and holes up to 70mm with this super-fast drying filler. Its special formula makes it lightweight so it won’t sag, making it perfect for fixing holes and cracks in ceilings. Perfect for big and last-minute repairs Touch dry in five minutes and ready to paint over in 15 minutes Suitable for plaster, stone, concrete and wood Leaves a smooth finish and fills deep
502 Weatherproof wood Adhesive/Glue
Can be used internally and externally and provides a high strength, impact resistance bond that is usually stronger than the wood itself. Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use. Dries clear. Fast cure, initial set in just 10 minutes. Advantages • Excellent rate of bond strength development.• High degree of water resistance. D3 Classification. • Interior/exterior use. • Low timber staining characteristics - will not stain.• Dries clear - contains no inert fillers.• Water based - environmentally friendly/easy clean up.• Suitable for radio frequency cure.
5M Universal Shiplap Channel White
Shiplap universal channel 5m is designed to start / finish 16mm products: available in white
Corner Trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. To Enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any pvc fascia installation should be glued to the board and the other side. COMES IN 3 COLOURS
Upvc roofline products are well suited to replace old timber fascias and soffits, our range includes facsias, soffits, capping board, ventilators, and trims. Ideal for a maintenance free home, no need to paint. Suitable to all types or home & commercial use
65mm Architrave is suitable for window and door trims and comes in three colours, Anthracite, White and Rosewood. These all come in 5m lengths
65mm Galvanised Springhead Nail - 10KG
The 65mm Galvanised Springhead Nail (10kg) is a high-quality, corrosion-resistant nail designed for various construction and roofing applications. The galvanised coating provides enhanced durability and rust resistance, making it suitable for outdoor use and exposure to moisture. The springhead design offers a secure and firm hold, reducing the risk of loosening over time. Key Features: Length: 65mm Material: Galvanised steel for rust resistance Head Type: Springhead for improved grip and holding power Weight: 10kg pack (approximate quantity varies) Usage: Ideal for roofing, fencing, and general construction work This nail type is commonly used in roofing felt and sheet materials, ensuring a strong and weather-resistant fix.
6mm Grano dust can be used for a range of purposes, it is ideal to be used as a sublayer under artificial grass and block paving. Grano dust can also be mixed with cement to make concrete, which is perfect for a range of outdoor building projects. - Used in floor screeds and manhole covers - Suited for monolithic and granolithic floor screed - Ideal for commercial use For a reasonable deep coverage. Bulk Bag 850kg coverage is approx 10m2 Small bag 20kg covers approximately .25 m2
Enhance your interior with our 95mm Architrave, designed for a sleek and stylish finish around doors and windows. Crafted for durability and aesthetic appeal, this architrave provides a smooth, professional look that complements both modern and traditional spaces. Key Features: ✅ Premium Quality – Made from PVC-ue ✅ Elegant Finish – Provides a neat and stylish border around doors and frames✅ Easy Installation – Simple to cut and fit for DIY and professional projects✅ Low Maintenance – Resistant to wear, ensuring lasting beauty Available Colours:
uPVC roofline products are well suited to replace old timber fascia's and soffits. The 9mm Flat Board is ideal for a maintenance free home.
uPVC roofline products are well suited to replace old timber fascia's and soffits. The 9mm Flat Board is ideal for a maintenance free home. ALL PRODUCTS ARE 5M LENGTHS.
uPVC roofline products are well suited to replace old timber fascia's and soffits. The 9mm Flat Board is ideal for a maintenance free home. ALL PRODUCTS ARE 5M LENGTHS.
9mm Reveal Liner Capping Board White
A uPVC 9mm Reveal Liner Capping Board is a durable and low-maintenance white PVC product designed primarily for use in construction and home improvement projects, specifically to enhance and protect window and door reveals. Below is a description: Key Features: Material: Made of uPVC (unplasticized polyvinyl chloride), a robust and weather-resistant material. Thickness: 9mm thick, providing a sturdy and lightweight solution. Purpose: Used to cap over existing window or door reveals for a clean and professional finish. Protects underlying surfaces from weathering, damage, and wear. Finish: A smooth, white surface that offers a modern, clean look and complements most window and door frames. Low Maintenance: Resistant to rotting, peeling, and cracking. It can be easily cleaned with soap and water. Weatherproof: Designed to withstand varying weather conditions, including UV exposure. Easy Installation: Lightweight and straightforward to fit with adhesive or screws. Applications: Ideal for use in refurbishment projects where old or damaged reveals need covering. Suitable for residential and commercial properties. Benefits: Improves the appearance of window and door frames. Enhances the longevity of structural reveals by protecting them from moisture and environmental damage. Cost-effective and practical alternative to more labor-intensive options.
Fibo adhesive is used for gluing boards instead of or in combination. 1 tube covers roughly 3 panels (1.5 packs) Size: 290ml Please note: single item only, not supplied in packs
Alumininum Foil Tape 50mm x 45.7m
Heat and Light reflective Aluminium Foil Tape, heat resistant to 180°C, Flame Retardant to Class O. Excellent moisture resistance, ideal for use as a vapour barrier between foil faced insulation panels in roof and wall applications, duct sealing on all types of air conditioning and ventilation and protecting wires and pipes from heat.
Aluminium Skylight Roof Black Ext White Int
Imagine stepping into your renovated kitchen or newly built single-storey extension where natural light bathes every corner of the room, creating an ambience that feels both fresh and inviting. This is the transformative power of the Crystal Black Aluminium Skylight Roof Lantern. The frame's exterior is fitted with external cappings and coated in a protective black powder-coated finish that will blend seamlessly with dark external features on your home's exterior, such as slate roof tiles. Inside, a pristine white finish effortlessly complements your white ceilings, creating a modern, sleek design that adds a touch of style without overwhelming your space. Features & Benefits: Crystal Black Aluminium Skylight Roof Lantern With White Interior Perfect for single-storey buildings, such as flat roof home extensions Bathes your rooms in natural light, reducing need for artificial light Can help you reduce utility bills Black coloured powder coated external frame with a versatile white finished interior Fitted with Blue Self Clean Toughened Roof Glass, a low-maintenance glazing solution A thermally broken system and has a U Value of 2.2 W/m²K Keeps your home cool in the summer months and warm during winter Featuring Blue Self Clean Toughened Roof Glass, a low-maintenance glazing solution that ensures a crystal-clear view of the sky above, this skylight is not just about aesthetics. It also offers outstanding performance, boasting a design that is more thermally efficient than conventional aluminium roof systems. With a thermally broken system and U Value of 2.2 W/m²K, your flat roof lantern keeps your home cool in the summer months and warm and cosy during the cooler winter months. The benefits don't stop there. By allowing natural light to fill your space, it significantly reduces the need for artificial lighting. This not only saves on energy bills but also transforms your rooms, making them feel brighter, more spacious, and inviting.
Aluminium Skylight Roof Grey 7016 Ext White Int
Imagine stepping into your renovated kitchen or newly built single-storey extension where natural light bathes every corner of the room, creating an ambience that feels both fresh and inviting. This is the transformative power of the Crystal Grey Aluminium Skylight Roof Lantern. The frame's exterior is fitted with external cappings and coated in a protective anthracite grey powder-coated finish that will blend seamlessly with dark external features on your home's exterior, such as slate roof tiles. Inside, a pristine white finish effortlessly complements your white ceilings, creating a modern, sleek design that adds a touch of style without overwhelming your space. Features & Benefits: Crystal Grey Anthracite Aluminium Skylight Roof Lantern With White Interior Perfect for single-storey buildings, such as flat roof home extensions Bathes your rooms in natural light, reducing need for artificial light Can help you reduce utility bills Grey-coloured powder coated external frame with a versatile white finished interior Fitted with Blue Self Clean Toughened Roof Glass, a low-maintenance glazing solution A thermally broken system and has a U Value of 2.2 W/m²K Keeps your home cool in the summer months and warm during winter Featuring Blue Self Clean Toughened Roof Glass, a low-maintenance glazing solution that ensures a crystal-clear view of the sky above, this skylight is not just about aesthetics. It also offers outstanding performance, boasting a design that is more thermally efficient than conventional aluminium roof systems. With a thermally broken system and U Value of 2.2 W/m²K, your flat roof lantern keeps your home cool in the summer months and warm and cosy during the cooler winter months. The benefits don't stop there. By allowing natural light to fill your space, it significantly reduces the need for artificial lighting. This not only saves on energy bills but also transforms your rooms, making them feel brighter, more spacious, and inviting.
Aluminium Skylight Roof White Ext White Int
Imagine stepping into your renovated kitchen or newly built single-storey extension where natural light bathes every corner of the room, creating an ambience that feels both fresh and inviting. This is the transformative power of the Crystal White Aluminium Skylight Roof Lantern. The frame's exterior is fitted with external cappings and coated in a protective white powder-coated finish that will blend seamlessly with light external features on your home's exterior, such as slate roof tiles. Inside, a pristine white finish effortlessly complements your white ceilings, creating a modern, sleek design that adds a touch of style without overwhelming your space. Features & Benefits: Crystal White Aluminium Skylight Roof Lantern With White Interior Perfect for single-storey buildings, such as flat roof home extensions Bathes your rooms in natural light, reducing need for artificial light Can help you reduce utility bills White coloured powder coated external frame with a versatile white finished interior Fitted with Blue Self Clean Toughened Roof Glass, a low-maintenance glazing solution A thermally broken system and has a U Value of 2.2 W/m²K Keeps your home cool in the summer months and warm during winter Featuring Blue Self Clean Toughened Roof Glass, a low-maintenance glazing solution that ensures a crystal-clear view of the sky above, this skylight is not just about aesthetics. It also offers outstanding performance, boasting a design that is more thermally efficient than conventional aluminium roof systems. With a thermally broken system and U Value of 2.2 W/m²K, your flat roof lantern keeps your home cool in the summer months and warm and cosy during the cooler winter months. The benefits don't stop there. By allowing natural light to fill your space, it significantly reduces the need for artificial lighting. This not only saves on energy bills but also transforms your rooms, making them feel brighter, more spacious, and inviting.
Beatsons Bulk Bag (Empty) are now available online at Beatsons Direct.
Beatsons De-icing Rock Salt Grit (Small/Bulk Bags)
Rock salt used for clearing/preventing ice or snow on paths, de-icing roads and driveways. Grit salt is suitable for mixing with sand for additional surface traction on roads and paths. Perfect for rapid de-icing of paths, roads, driveways and steps Fast de-icing leaving surface free from ice with almost no residue Durable composition, prevents re-freezing
Beatsons Hessian Sand Bag now available online at Beatsons Direct. Can be used to assist with flood prevention. Free delivery available UK wide. Sand not included with the sand bag.
Zinc Roof Ridges – Durable, Weatherproof Ridge Capping Our Zinc Ridges provide a long-lasting and aesthetically pleasing solution for finishing pitched roof lines. Manufactured from high-quality zinc, these ridge caps offer excellent resistance to corrosion and weathering, making them ideal for both contemporary and traditional roofing projects. Designed for easy integration with zinc roofing panels or tiles, the ridges create a watertight seal at the roof apex, helping to prevent leaks and protect against wind uplift. Their sleek, low-maintenance finish naturally develops a protective patina over time, enhancing longevity and visual appeal. Key Features: Made from premium grade zinc Long-lasting and corrosion-resistant Compatible with a range of roofing systems Provides secure, watertight ridge coverage Maintenance-free with natural patina development Available in various profiles and lengths Perfect for residential, commercial, and heritage buildings where performance meets architectural elegance.
Big Hole Smooth Finish Filler - 1.2ltr
Fill big holes up to 50mm deep in one go with our Big Hole Smooth Finish Filler. It won’t sag so it’s perfect for ceilings and it can be drilled and nailed too. Super smooth finish with no need for sanding Dries in one to two hours Ronseal applicator included Suitable for plaster, stone, concrete and wood Fills deeper than most standard fillers
Blue Circle Mastercrete Cement
Blue Circle General Purpose Cement (Paper Bag) offers consistent, quality results for a wide range of standard building applications including concrete, mortar, rendering and screeds. Suitable for use on all projects from small DIY jobs to major construction. Blue Circle Mastercrete (Plastic Bag) 25KG is an enhanced Portland-limestone cement, for general purpose work, with improved resistance to freeze/thaw attack, lower water demand than ordinary Portland cement and offers a more cohesive mix. Based on sustainable cement technology Grey in colour Consistent strength meeting all the conformity criteria in BS EN 197- Compatible with admixtures such as air-entraining agents and workability aids Trial mixes are recommended to determine the optimum mix proportions.
Blue Circle Snowcrete White Cement 25kg
Snowcrete is the industry-leading white Portland cement, specifically designed for applications where aesthetic finish and color consistency are paramount. Whether you are aiming for a brilliant white finish or a vibrant decorative color, Snowcrete provides a high-strength, versatile base that outshines standard grey cement. Key Features Brilliant White Finish: Delivers a clean, bright aesthetic that enhances the appearance of any masonry or concrete project. Consistent Color Quality: Manufactured under strict controls to ensure uniform color throughout the bag and across different batches. Pigment Friendly: The neutral white base allows for more predictable and vivid results when mixing with cement dyes or pigments. High Strength: Meets the performance standards of BS EN 197-1, ensuring durability and structural integrity alongside its visual appeal. Versatile Application: Ideal for architectural concrete, rendering, floor screeds, and pointing.
Bonding Compound 25kg (Adhesive Dot Dab)
Knauf Plasterboard Adhesive / Bonding Compound provides a high-quality, robust lining in the shortest possible time frame, speeding up projects. Multi-purpose gypsum-based adhesive for plasterboards and insulating laminates. The system is suitable for most brick, block and concrete backgrounds and will work with a wide range of Knauf Plasterboards or Knauf Insulating Laminates. Quick and economical to install Minimum stand-off distance No need to mechanically fix to the background
British Gypsum Thistle Bonding Coat
Thistle Bonding Coat is an ideal base coat plaster for smooth or low suction backgrounds such as tiling, concrete, plasterboard or surfaces treated with Thistle Bond-it. The fine mix allows for improved workability, making it easier to spread, rule and Darby. Thistle BondingCoat is a lightweight, retarded hemihydrate that is pre-mixed gypsum plaster incorporating exfoliated vermiculite aggregate, which only requires the addition of clean water to prepare it for use. With a final coat of any Thistle finish plaster, Thistle BondingCoat provides a smooth, inert, high quality surface to internal walls and ceilings, and a durable base for the application of decorative finishes.
Build It Mortar in Pennine finish is a high-quality, pre-mixed mortar ideal for bricklaying, blockwork, and general masonry projects. Supplied in convenient 20kg weather-resistant bags, this ready-to-use mix provides excellent workability and consistent performance for both domestic and commercial applications. Its attractive Pennine grey tone offers a clean, professional finish that complements a wide range of brick and stone types. Just add water and mix for a reliable, durable bond. Colour: Grey tone Bag Size: 20kg Pre-mixed for convenience Consistent strength and smooth finish Suitable for brick, block, and stone Ideal for internal and external use
Bullnosed Straight Kerb 125 x 255 x 915mm (WxHxL)
The Marshalls Bullnosed Kerb Straight is used in both industrial and commercial applications. Precision-manufactured kerb is highly durable, long lasting and provides a cost effective kerb line to paths and roads. Features & benefits Highly durable Easily integrates with other products Conforms to BS EN 1340:2003 dimensions
Chimney Bonnet with bird guard
Protecting your chimney shouldn't just be a chore—it should be a long-term solution. Our Chimney Bonnet with Bird Guard is designed to act as a sturdy umbrella for your flue, keeping rain out and local wildlife exactly where they belong: outside. Key Features Dual-Action Protection: Combines a wide-brimmed "bonnet" lid to deflect rain and snow with a robust mesh screen to block birds, squirrels, and debris. Weather-Resistant Build: Crafted from high-grade galvanized steel or stainless steel to prevent rust and corrosion, even in harsh coastal or snowy environments. Universal Fit Mesh: The integrated bird guard features precision-spaced wiring that stops nesting attempts without restricting the airflow (draw) of your fireplace. Aerodynamic Design: Engineered to reduce wind downdrafts, helping to prevent smoke from blowing back into your living room on gusty days.
Features and Benefits - Dimensions - 215 x 102.5 x 65mm - Water Absorption - ≤10% - Durability - F1 - Size Tolerance Mean & Range - T2 & R1 - Configuration - Vertically Perforated - Active Soluble Salts - S2 - Compressive Strength - ≥60 N/mm² - Gross Dry Density - 1450 kg/m³ - Pack Size - 452
Lead Roof flashing provides a long-term watertight roofing option that last three times longer than most man made alternatives. Lead Sheets is produced from 100% recycled lead which leads to a low carbon footprint. Quick and easy installation in most weather conditions Calder 50Year warranty
Concrete Common Brick Smooth With Frog
Key Features Summary High Structural Strength: Engineered from high-density, dense concrete for load-bearing reliability in general construction. Deep Frog Design: Features an indented top face ("frog") that holds mortar to increase joint bonding strength and overall wall stability. Excellent Frost & Moisture Resistance: Fully compliant for use above and below the Damp Proof Course (DPC) in freeze-thaw risk conditions. Smooth Standard Finish: Offers consistent dimensions and flat, smooth faces for clean alignment and uniform mortar lines. Versatile Construction Use: Suitable for internal load-bearing walls, foundations, partition walls, and background masonry for rendering. Frequently Asked Questions (FAQ) Should the frog face up or down when laying? Standard bricklaying practice requires common bricks to be laid frog side up. Filling the entire frog with mortar ensures the finished wall achieves its full structural strength, load-bearing capacity, and sound insulation properties. Can these concrete commons be left exposed externally? While concrete commons can be used externally, they are primarily structural bricks. They are generally specified for background work, foundations, and walls that will be rendered, plastered, or face-clad. For visible decorative facades, a dedicated facing brick is usually recommended. How many concrete common bricks are needed per square metre? Using standard 10mm mortar joints, you will need approximately 60 bricks per square metre for a single-skin wall.
Concrete Reinforcing Steel Mesh
A grid-like framework made of steel, used primarily to enhance the strength and durability of concrete structures. It provides tensile strength to concrete, which is inherently strong in compression but weak under tension. Reinforced mesh is commonly used for the reinforcement of concrete structures, foundations and floor slabs. Supplied in standard sheet sizes of 3.6m x 2.0m. Reducing the build-up of lap depth.
Beatsons Concrete Sand, also known as Sharp Sand or grit sand, is a coarse, washed and screened sand for building and landscaping projects. Its gritty, angular texture compacts to a firm, free-draining base, making it ideal for bedding block paving, laying patio slabs and mixing concrete or floor screeds. It is available in an 850kg bulk bag covering approx. 10m² at 50mm depth (2 inches), or a handy 25kg bag covering approx. 0.3m² for smaller jobs and repairs. Choose next-day delivery or Click & Collect from your local Beatsons branch.
Copper Clout Nail 38x3.35mm 25kg
Approx. Pcs Per 1kg 300 Approx. Qty (pcs) 7500 Brand TIMCO Carton Qty (packs) N/A Corrosion Rating (1-5) 3 - Urban & industrial areas with a low salt atmosphere Feature 1 Provides high levels of rust protection Head Type Round L (mm) 38 Material Copper MOQ 1 MOQ Increment 1 Pack Dimensions L x W x H (mm) 282 x 206 x 298 Pack Qty 25 Pack Type Carton Pack Weight (kg) 25.3 Shank Ø (mm) 3.35 Size (mm) 38 x 3.35 Substrates Roofing Felt, Slate, Shingles Type Clout Weight (kg) 25
D Marshall & Son Primastep
The Marshall & Son Primastep 1200. A concrete step that does everything a traditional precast step does, but it's only 50mm thick and weighs just 75kg, compared to the usual 132kg. Dimensions Length 1200mm Tread depth 350mm Tread Height 150mm Thickness 50mm
DPC provides damp proof protection, preventing the ingress of external moisture. This product is suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications
Dowsil DC785+ Sanitary Silicone Sealant 310ml
Dowsil 785+ is a one-part, silicone sealant specifically designed for the sealing of sanitary fittings, including baths, showers, sinks, urinals and ceramic tile joints. It protects against salmonella, E.coli and MRSA. Contains a fungicide to resist mould growth A fire rating of up to 2 hours can be achieved Joint movement capability +/-20% Conforms to ISO 11600-F-20LM
EasyScape Gravel Hold from Azpects keeps your gravel in place and stops it from moving. It helps your gravel stay neat and safe without any hassle. Features & Benefits For use on new or existing mulch and stones. Easy to use resin binder that coats the stones in a protective sheen Leaves permeable surface for water to soak through as normal. Suitable for pebbles and gravel sizes, 4mm to 20mm in diameter. Water based, non-hazardous. Covers up to 12m².
EcoTherm Inno-Torch Flat Roof Insulation
Part of the Building Innovation product range, Inno-Torch flat PIR boards offer a thin and durable insulation solution for flat roofs. The boards are suitable for use with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems, on concrete, timber or metal decks. With thermal conductivities as low as 0.024 W/mK, Inno-Torch boards can allow you to achieve target U-values with slim constructions. Can be fitted with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems Suitable for use on new and existing concrete, timber and metal decks Lightweight PIR insulation boards are easy to transport, cut and install
Give your construction project a sleek, contemporary aesthetic with Edenhall Smooth Faced Concrete Facing Bricks. Specially engineered for exterior facades, extensions, and modern architectural boundary walls, these premium concrete bricks combine high-performance structural durability with a clean, crisp, untextured finish. Manufactured using dense, high-quality aggregates blended with colorfast iron oxide pigments, these bricks offer excellent color longevity that resists fading over time. Whether you are building a modern residential property or a commercial development, Edenhall smooth facing bricks provide a uniform finish with sharp lines that elevate any external facade.
Egger D4 Joint & Joist Adhesive
EGGER D4 Joint & Joist Adhesive is a high-performance structural flooring adhesive specifically engineered for use with EGGER flooring products and other timber board installations. It’s an essential part of the EGGER Advanced Structural Flooring System, offering strong, durable, and moisture-resistant bonds in flooring and timber joinery applications. Key Features Waterproof & Durable: Classified to D4 (EN 204) standards for high water resistance and long-lasting performance. huwsgray.co.uk Expanding Formula: The adhesive expands and foams out of board joints during curing, sealing gaps and helping prevent moisture ingress. Strong Bond: Designed to securely bond board joints, flooring boards to joists, and seal cut edges of EGGER particleboards. Gap Filling: Its foaming action fills irregular or uneven surfaces between joists and boards. ellisdawe.co.uk Improved Floor Performance: Can help reduce squeaks and contribute toward meeting sound test standards (e.g., 43 dB) when used as part of EGGER’s flooring system. No Special Tools Required: Supplied in user-friendly bottles, eliminating the need for specialised dispensing guns or tapes.
Engineering Brick Class B Red Perforated
Key Features Summary High Structural Strength: Rated to a minimum compressive strength of 75N/mm2, making it ideal for heavy load-bearing structural applications. Low Water Absorption: Maximum water absorption rate of 7%, offering exceptional resistance to dampness, frost, and ground moisture. Smooth Perforated Finish: Features a classic red smooth face with a perforated core that reduces weight and ensures strong mortar bonding. Severe Weather Resistance: Rated F2 / S2 for frost resistance and low soluble salt content, making it suitable for exposed masonry work. Fully Standardized: Manufactured to BS EN 771-1 standards for consistent size, quality, and dependable structural performance.
The Everbuild 503 SBR Bond Waterproof Bonding Agent is a professional-grade solution designed to meet the demands of large-scale construction and renovation projects. Supplied in a 5L container, this versatile product acts as a waterproof bonding agent, primer, sealer, and admixture, making it an essential tool for professionals and contractors. Whether you’re bonding, sealing, or waterproofing surfaces, Everbuild 503 SBR Bond provides unmatched versatility and reliability. Its advanced formula enhances the strength, flexibility, and water resistance of cement-based materials, making it suitable for demanding environments such as basements, kitchens, bathrooms, and outdoor structures. This 5 litre size is ideal for tackling extensive projects, saving time and effort with fewer refills.
Everbuild Accelerator & Frostproofer 203 5ltr
Everbuild 203 Accelerator & Frostproofer is a chloride-free liquid admixture designed for use in cement-based mixes to speed up setting and hardening and to protect fresh mortar/concrete from frost damage during cold weather. Key Features Accelerates setting and hardening times of mortar, concrete, screeds and renders — useful in cold conditions or when rapid set is needed. Frost protection: helps prevent freeze-thaw damage to fresh mixes in temperatures down to around -8 °C. Chloride-free, non-corrosive formula, making it safer with embedded metal (e.g., brick ties). Conforms to EN 934-2 Table 7 (standard for concrete admixtures)
Everbuild Brick & Patio Cleaner 5LTR
Everbuild Opti-Mix Mortar Plasticiser is a highly concentrated air-entraining liquid plasticising admixture designed to improve the performance and workability of mortar mixes. It’s much stronger than standard plasticisers — 1 litre effectively replaces about 25 litres of conventional mortar plasticiser. Key Features Superior Plasticising Action: Forms very stable micro air bubbles in the mortar, improving the consistency and workability — often described as giving a “buttery” consistency that’s easier to apply and finish. Improved Durability: Helps reduce shrinkage, cracking and curling as mortar cures, and gives enhanced resistance to mild frost and freeze-thaw cycles. Reduces Efflorescence: By replacing lime in the mix, it can help lower the chance of salt deposits (efflorescence) forming on the surface. Highly Concentrated: A small dosage — typically 5–10 ml per 50 kg cement — is enough to improve mortar properties significantly. Easy to Use: Supplied in a self-gauging bottle for controlled dosing.
Powder Mortar Tone is formulated from best quality oxide pigments for permanently colouring all types of mortars, rendering, concrete and pointing. The pigments disperse easily into the mix to give a uniform shade for each mix batch. Shading can be adjusted to provide a wider variety of colour depths. Permanently colours cement based products - light fast pigments will not fade. Improves workability/trowelability - contains a plasticizer. Chloride free (chloride ion content < 0.1%). Reduces bleeding/segregation. Inhibits efflorescence.
Everbuild Dual Purpose Foam Cleaner
Everbuild Dual Purpose Foam Cleaner is a specialised aerosol cleaning product designed for use with uncured polyurethane (PU) foams. It contains a powerful solvent that dissolves and removes wet (uncured) foam from foam guns, nozzles, and most common building substrates. The product is particularly useful after applying expanding foam to clean tools and clear accidental foam spills before the foam hardens. Key Features Dual-purpose design: Can be used both through a foam gun applicator for internal cleaning and as a regular spray using the included nozzle for external cleaning. Solvent-based aerosol: Formulated to dissolve uncured PU foam quickly and efficiently. Separate spray nozzle: Included for versatile use without an applicator. Extends tool life: Helps keep foam guns and nozzles clean so they can be reused many times.
Everbuild Fire Foam B2 Handheld
Firefoam B2 Handheld is a quick setting fire rated, one part polyurethane foam in a ready to use hand held canister. Fire resistant for up to 2 hours in certain joint configurations. It expands on application to up to 50 times the can contents and meets the requirements of the test criteria for BS 476 Part 20.
Everbuild Fungicidal wash 404 5LTR
EVERBUILD® 404 Fungicidal Wash is a powerful, fast[1]acting solution which is effective on most surfaces. It quickly removes fungus and lichen from floors, walls, drives and roofs. It also leaves a residual surface to help prevent further infestation
Everbuild One Strike Filler 1ltr
One Strike is a revolutionary filler formulated using lightweight polymer bubbles that fills holes and cracks, even deep holes, in just one quick application. There is no need for secondary filling to level off as the filler will not shrink, sag or crack. Easy to apply No sanding required – finishes to a smooth surface Quick drying – ready to paint/paper in approx. 30 minutes Fills up to 75mm deep in one application No sagging or shrinkage Overpaintable with most solvent based and emulsion paints Overstainable Suitable for internal and external use Dries brilliant white
Exterior Multi Purpose Smooth Finish Filler - 1.2kg
Ideal for fixing holes and gaps in masonry, concrete and brick. It’s water and frost resistant and can be applied on days when the weather isn’t quite perfect. It’s tough, durable and you can drill into it once it’s dry. Repair your exterior walls Fills gaps up to 20mm deep Dry in one to two hours Available in tubs or tubes Water resistant Stands up to the elements Designed to be used in damp and moisture-prone conditions
Extra Large Head Clout Nails - Galvanised 20x3.00 25KG
Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard.• For medium duty rust protection• Conforms to Eurocode 5 and service class 2
Blue Circle Extra Rapid Cement is a high-performance, fast-setting cement ideal for jobs where speed is essential. This 25kg bag delivers a versatile and durable solution for concrete, mortar, and repair applications, setting in just 30 minutes under normal conditions. Suitable for both internal and external use, it is perfect for fixing fence posts, paving, kerbs, and emergency repairs. Key Features: Rapid setting: sets in approximately 30 minutes Ideal for fast-track construction or repairs Suitable for concrete, mortar, and general repairs Use indoors or outdoors Complies with EN 197-1 CEM II/B-S 52.5N standards Applications: Fence posts, bollards, and railings Concrete paths and paving Repairing steps, floors, and driveways Setting manholes and drainage systems
Fill & Finish Light Jointing Compound
Fill and Finish Light from Knauf is an easy-working product for fast and smooth joint finishing. It is a lightweight ready-mixed compound for bedding tapes and finishing joints in drywall partitions and ceilings. When drying it has very low shrinkage and only needs two coats for a professional look.
Firefoam B2 Gungrade is a quick setting fire rated, one-part polyurethane foam designed for application by any standard foam applicator gun. High degree of fire rating: slows down the passage of flames and smoke in comparison to standard B3 grades Fire resistant for up to 2 hours in certain joint configurations Quick setting – can be cut, sawn or plastered in 1 hour Expands up to 50 times original can volume Possesses insulating and sound deadening properties Meets the requirements of the test criteria for BS476 Part 20 When used as part of a fire-rated joint, use in conjunction with Everbuild Firemate intumescent sealant for maximum fire rating
Knauf Fire Panel offers superior fire protection. The additional fire protection properties of Knauf Fire Panel make it ideal for use in domestic separating walls (normally walls between different apartments or house and garage for example), garages and corridors. In the event of a fire, as part of a drywall system, Fire Panel is designed to slow the spread of fire between rooms allowing for safe evacuation of the building. High Performance plasterboard giving improved fire protection when used as part of a full Knauf system
Flashband Self Adhesive Flashing Tape for Roofs 10m
Key Features Summary Instant Watertight Bond: Self-adhesive bitumen backing sticks immediately upon application to create a long-lasting, weatherproof seal. No Torch or Specialist Tools Needed: Easy to apply using standard hand pressure and a seam roller—eliminating the open flames associated with traditional torch-on felt or lead dressing. 4-Layer Tear Protection: Features a durable grey lacquer finish over heavy-duty aluminum foil and polyester reinforcement for exceptional tear resistance. Extreme Temperature Resistance: Performs reliably in harsh British weather, withstanding temperatures from -10°C to +100°C without slipping or melting. Multi-Surface Compatibility: Adheres seamlessly to brick, masonry, concrete, roofing felt, slate, terracotta, wood, glass, rigid plastics, and metalwork. Frequently Asked Questions (FAQ) Do I need to use a primer before applying Bostik Flashband? For clean, non-porous surfaces in warm weather, a primer is generally not required. However, if you are applying the tape to porous, dusty, or cold surfaces (such as weathered concrete, brickwork, or mineralized felt), using Bostik Flashband Primer is recommended to maximize adhesion. Can Flashband be applied during cold winter weather? Yes, but the adhesive becomes less tacky at lower temperatures. For best results when applying in temperatures below 15°C, store the roll in a warm room prior to use, and gently warm the surface or the tape's adhesive backing with a heat gun during installation. How much should I overlap adjacent strips of Flashband? When joining two pieces of flashing tape side-by-side or end-to-end, ensure a minimum overlap of 25mm to guarantee a continuous, watertight join.
Floor Levelling Compound 708 20Kg
Everbuild 708 Self Levelling Floor Compound is a cement based product used to level out uneven floors and screeds prior to laying ceramic tiles, thermoplastic tiles, lino, wood block flooring or carpet. Mix with either water or EVERBUILD FLOOR FLEX PLUS to give a free flowing self levelling topping. When mixed as directed, the compound provides a free flowing mix that sets in 90 minutes and can be overlaid after only 8 hours at normal temperatures. NOTE: This product is not suitable for use as a final wearing surface. Size: 20kg.
Where greater protection is required against water and air ingress, FrameTX® Maxi is an excellent choice in breather membrane. FrameTX® Maxi is a multi-layer, vapour permeable, air barrier, high performance breather membrane, for use in timber & steel frame constructions. It is specifically designed to allow the transfer of moisture through the membrane, thereby reducing the risk of condensation in the wall structure. When FrameTX® Maxi is effectively installed it will act as an air barrier. FrameTX® Maxi is also Agrement certified by BBA in the UK for use in in warm non-ventilated and cold ventilated pitched roof systems.
Galv Brick Reinforcement 65mm x 20mtr & 115mm x 20mtr
An expanded metal mesh designed to be incorporated into masonry for crack control. Durability- Excellent corrosion resistance and a service life of not less than 60 years
Galv Ext Render Stop/Bellcast Bead 3.0m
Plaster and render bead. Used where a neat drip or ‘bell-end’ lower edge is needed on external render. Fixed by mortar dabs or masonry nails. Although this is for external use we would generally recommend Stainless Steel or PVC-u for this application only using this product in sheltered or low rainfall areas.
External bead. Used where a neat drip or ‘bell-end’ lower edge is needed on external render. Fixed by mortar dabs or stainless steel nails.
Galv Perforated Thin Coat Bead 3.0m
Drylining Bead. A thin coat board bead for plaster skimming on plasterboard lined walls. Plaster depth 2/3mm. Nail holes for easy fix with drywall nails. Scalloped edge for an excellent plaster key. Internal use only.
Galv Plaster Stop Bead 10mm x 3.0m & 13mm x 3.0m
Drylining bead. A bead for protection of thin coat plaster at edges and reveals and for abutment of thin coat plaster against other wall finishes. Also sometimes used as an arch bead. Nail holes for easy fix with drywall nails. Rigid but light bead perforated for an excellent thin coat plaster key. Either 3mm or 6mm Stop. Internal use only.
Plaster and render bead. This traditional wet plaster bead provides a strong true corner or arris, with the mesh wings allowing for a good plaster key and resistance to cracking. Fixed by plaster dabs at approximately 600mm centres, push the wings into the dabs to allow for the required plaster depth, up to 13mm, then ensure the nose is set square and plumb as required. Generally for internal use only.
Galvanised Fixing Band 20mm x 10mtr
Perforated galvanised band Provides a quick and reliable fixing method Can be cut or bent easily
Galvanised Round Wire Nails - 10kg
These Galvanised Round Wire Nails are a versatile and durable fixing solution, ideal for a wide range of construction and DIY applications. Manufactured from high-quality steel and hot-dip galvanised for enhanced corrosion resistance, they offer long-lasting performance in both indoor and outdoor use. Their smooth shank and large flat head provide excellent holding power, making them suitable for timber framing, fencing, pallet work, and general carpentry. Key Features: Supplied in a 10kg trade pack Galvanised coating for superior rust resistance Strong and reliable for structural and general-purpose use Ideal for soft and hardwood applications Consistent size and quality for ease of use Perfect for professional tradespeople and DIYers alike, these nails deliver strength, durability, and peace of mind on every project.
The Gorilla Tub®, previously part of the Tubtrug® range, is a flexible and weather resistant tub that is built to last. You can use this tub for everything! The 'golf ball' handles make Gorilla Tub® easy to grip and carry, while the reinforce handle as a whole can take the pressure of even very heavy loads. The sides of the tub a ribbed, to ensure it's strength and durability, and the edges are chamfered to make scooping, sweeping up or pouring even easier. They are also produced using *food-grade LDPE, meaning your Gorilla Tub® is suitable for storing and preparing food in, as well as ensuring they're horse and pet friendly, too. Flexi Tub Sizes: 75L Extra Large 38L Large 26L Medium 14L Small
Green Vapour Barrier 125Mu 4x50m
The purpose of this vapour barrier is to improve airtightness within a building or structure and remove any condensation that might form. It is most commonly used to limit the path of damp, warm air which could otherwise permeate into the roof of a building.
Half Battered Straight Kerb 915 x 125 x 255mm (L x D x H)
The Marshalls Half Battered Straight Kerb Channel 915 x 125 x 255mm (L x W x H) Grey is a high durability precision unit used for a wide variety of landscaping purposes. These concrete slabs use hydraulic pressing in the manufacturing process of the standard natural kerb, channel and edging. This channel can be integrated seamlessly with a range of other products.
Hanson Fast Set Postcrete 20Kg
Hanson Fast Set Postfix is simple to use (just add water) and fast-setting concrete for fixing posts into the ground. Sets in under 3 minutes – ideal for jobs where speed is essential. Suitable for tradesmen, DIYers and local authorities. One bag makes enough for one post. Easy to use (just add water). How Much water for a 20kg bag of postcrete? To mix a 20kg bag of Postcrete, you usually need to add around 2.5 to 3 liters of water. However, always refer to the instructions on the bag, as water requirements can vary depending on environmental conditions and the desired consistency of the mix. Features & benefits Conforms to BS EN 9001 Weatherproof plastic packaging – suitable for outdoor storage. Easy to use – just add water 2.5 to 3 Liters One bag = one post Aggregate mix for increased initial support of post
Hanson Ready Mix 40N Concrete 20kg
Hanson 20kg Readymix Concrete 40N Mix is a pre-mixed, high-strength concrete blend supplied in a 20 kg bag, designed to deliver reliable concrete right on site with minimal fuss — simply add water and mix to use. Key Features High compressive strength (40 N/mm²): Provides a stronger finish than standard mixes, suitable for structural and heavy-duty tasks once cured. Pre-batched mix: Cement, sand and coarse aggregates are pre-blended in the correct proportions — just add clean water. Easy to use: No need for on-site mixing of separate materials — ideal for DIY or trade jobs. Versatile applications: Suitable for footings, foundations, steps, paths, manholes, repairs and other general concrete work. Coverage: One 20 kg bag mixed with around ~2 L of water produces ~0.008 m³ of concrete — covering roughly 0.10 m² at 75 mm depth or 0.08 m² at 100 mm depth. Standards: Complies with relevant British standards for high-strength ready-mixed concrete.
Hanson Sand Cement Mortar 20kg
Key Features & Benefits M6 Strength Grade: Engineered for superior performance, structural durability, and optimal bonding. Ready to Use: Pre-mixed formula—just add clean water to achieve your desired working consistency. Weatherproof Packaging: Supplied in tough polythene packaging, making it suitable for outside job-site storage. Versatile Applications: Ideal for bricklaying, blockwork, pointing, rendering repairs, and patching jobs. Convenient 20kg Bag: Single-man handleable size designed to minimize waste on smaller building projects. Fully Compliant: Manufactured to conform with BS EN 998-2 / BS EN 9001 standards for quality assurance.
A versatile range of brackets for use in 90 degree connections allowing for use of nails, screws and / or bolts and coach screws. Angle Brackets have a reinforced rib.
Hydraulic White Peak NHL 3.5 25kg
The NHL 3.5 Hydraulic Lime 25 kg White Peak Blue Circle is a high-quality natural hydraulic lime designed for use in traditional masonry, conservation and general construction applications. Classified as NHL 3.5, it offers a balanced combination of strength, flexibility and breathability, making it suitable for both internal and external use. Widely specified for heritage restoration, repointing, bricklaying and stonework, NHL 3.5 sets through a combination of hydration and carbonation, allowing moisture to escape while providing durable structural performance. Supplied in a 25 kg paper bag, it is suitable for professional and specialist building projects. Available in pallet quantities of 56 bags for efficient site supply. Key Features White Peak Blue Circle NHL 3.5 hydraulic lime Natural hydraulic lime with moderate strength Breathable and flexible for traditional construction Suitable for internal and external applications Ideal for masonry, brickwork and stonework Supplied in a 25 kg paper bag 56 bags per pallet
Isover APR 1200 Acoustic Partition Roll
Key Features Summary Exceptional Sound Reduction: Designed specifically to reduce airborne sound transmission in internal stud walls, timber joist floors, and acoustic partition systems. Pre-Slabbed for Easy Fitting: Supplied pre-split to friction-fit standard timber and metal stud centres (600mm) without slump or sagging over time. Dual Thickness Options: Available in 50mm and 100mm variants to meet specific Building Regulations (Part E) acoustic requirements. Non-Combustible (Euroclass A1): Achieves the highest possible fire rating for complete peace of mind and building compliance. Sustainable Glass Mineral Wool: Manufactured using up to 80% recycled glass, making it an eco-friendly choice for domestic and commercial projects.
Isover Spacesaver Loft Insulation Roll
Isover Spacesaver is a high-performance glass mineral wool insulation roll, designed for easy installation at ceiling level between common joist spacings. Pre-perforated for flexibility and supplied in extra-long roll lengths, it reduces on-site handling and installation time. The range also includes Spacesaver Lite, Ready-Cut, and Spacesaver Plus options for varied project needs.
Standard Timber to Timber Hangers. A quick and safe method of joist trimming for light, medium and heavy applications such as supporting floor joists, trimming stair wells, and underslung joists. They have increased hole centres to spread load over greater area.
Kalsi Shiplap Cladding 150mm 5m Anthracite Grey
The perfect choice for enhancing your home’s exterior with a sleek, dark grey finish. This UPVC cladding elevates the look of your property and provides durable protection against the elements. Loved for its modern aesthetic and easy installation, it’s an ideal choice for any exterior upgrade.
Our kiln dried is a versatile sand – ideal for use in general building. Primarily used as a joint filler between block paving and patio slabs, providing a firm structure and preventing movement. - This sand is perfect for patios and block paving. - Can be brushed into the joints between paving to prevent movement whilst still allowing drainage. If you stay outside our local delivery area, you can order this product HERE
Bent Light Duty restraint straps are great for any vertical applications, such as attaching wall plates to masonry These are available in 600mm,900mm and 1200mm Light duty restraint straps can be used for vertical restraint applications, such as holding down wall plates to masonry. These multi-holed straps are supplied in 100mm increments with 6mm holes at 25mm offset centres. Available straight, bent or twisted or in combinations as required in galvanised or stainless steel.
Twisted Light Duty restraint straps are great for any vertical applications, such as attaching wall plates to masonry. These are available in 600mm,900mm and 1200mm. Light duty restraint straps can be used for vertical restraint applications, such as holding down wall plates to masonry. These multi-holed straps are supplied in 100mm increments with 6mm holes at 25mm offset centres. Available straight, bent or twisted or in combinations as required in galvanised or stainless steel.
Code 4 lead sheet adorns the roofs of many types of buildings across the United Kingdom because of its ease of use, durability, and the pleasing grey colour of its protective patina. Code 4 lead roll is easily shaped, long-lasting and flexible in all weather conditions, making it perfect for the UK climate. Lead sheet has been in use as a building material for centuries. A 100% recyclable material, lead is still as relevant in today’s sustainable society as it was when first introduced.
A multi-purpose fixing angle plate for general site applications, ie for connecting timber joists to timber purlins.
Light duty restraint straps can be used for vertical restraint applications, such as holding down wall plates to masonry. These multi-holed straps are supplied in 100mm increments with 6mm holes at 25mm offset centres. Available straight, bent or twisted or in combinations as required in galvanised or stainless steel.
Mannok Therm QL PIR Insulated Plasterboard 2400x1200mm
Mannok Therm Laminate-Kraft / MLK PIR is a high performance, fibre free insulated board, with a kraft paper facing on one side and plasterboard bonded to the other side. Mannok Therm Laminate-Kraft / MLK PIR insulation is ideally suited to be used under rafters to reduce the overall heat loss through the roof and eliminate thermal bridging through the rafters. With the additional benefit of its paper facer, Mannok Therm Laminate-Kraft / MLK PIR insulation is also suitable for use in dry-lining applications fixed in place using dot-and-dab adhesive or mechanical fixings. *Mannok Therm Laminate-Kraft / MLK (previously Quinn Therm QL-Kraft) Total Thicknesses available: 37.5mm, 50.5mm, 62.5mm, 72.5mm, 82.5mm, 92.5mm, (select from the drop down menu) Plasterboard Thickness: 12.5mm Board Size: 2400mm x 1200mm Coverage: 2.88m per board Thermal Conductivity: 0.022w/mk Facing: Paper facing on one side & plasterboard bonded to the other side
Manthorpe GL250 Insulated Drop-Down Loft Access Door White 686mm x 856mm
The GL250 drop down loft door is an innovative solution to the need for energy efficient loft hatch door access, offering a cost effective alternative to traditional roof space entry. The unobtrusive design coupled with sleek, contemporary styling makes the door an ideal match for modern decors. The revolutionary design of the multi-point catch mechanism means that the GL250 loft hatch door can maintain a more effective draught seal around the entire accessible opening, helping to meet the air leakage requirements of Part L of the Building Regulations and preventing the problem of moist warm air entering the roof space causing condensation and heat loss issues. Available with a range of insulation options to suit all requirements of modern construction levels; from an entry level insulation, to the Robust Construction Detail U-Value of 0.35 W/m²K and even down to a U-Value of 0.15 W/m²K to help meet the higher levels of the Code for Sustainable Homes.
Masonry Joist Hanger 150 x 50mm
standard hanger is designed for building into brickwork or blockwork.
Everbuild Mitre Fast Bonding Kit is a two-part instant adhesive system designed to rapidly bond mitre joints and other materials in furniture, timber, kitchen and plastics applications. It combines a high-viscosity cyanoacrylate adhesive with an aerosol activator to create strong bonds in a fraction of the time needed with traditional wood glues. How It Works Two-part system: Includes a cyanoacrylate glue and a spray activator. Flash setting: Bonds most materials in about 10 seconds once the activator and adhesive are applied. High viscosity: Minimises soak-in on porous substrates (e.g., wood), improving bond strength over ordinary cyanoacrylate glues. Gap-filling: Fills small gaps up to about 0.2 mm in mitre joints.
Moisture Panel 2400 x 1200 x 12.5mm
2400x1200x12.5mm Plasterboard Taper Edge Moisture Panel identified by its green paper face is designed for use in bathrooms, kitchens and areas of the house where moisture and humid conditions are present. The additives added to the core of the board repels moisture. The boards taper edge allows for a flush finish, which with suitable taping and jointing can create an invisible seam ready to receive either a plaster finish or direct decoration.
Multi Layer Paint & Varnish Remover 500ml
OB1® Multi-Layer Paint & Varnish Remover is a revolutionary product to remove old layers of paint and lacquer on surfaces of stone, asphalt, metal and wood. Product Characteristics Gel structure. Very effective. The aerosol should be stored at room temperature before use. Application temperature 5 – 30°C. Spray pattern approximately 8 centimetre wide. APPLICATION Shake before use. Before use, test the compatibility of the surface. Apply generously and allow to take effect. The time to take effect depends on the quality and age of the paint or lacquer to be removed. Then, remove with a tool appropriate for this purpose. On stubborn deposits, you need to repeat the process.
Multi Purpose Smooth Finish Filler
Fill holes up to 20mm and leave a tough repair that won’t shrink or crack. Our Multi Purpose Smooth Finish Filler comes pre-mixed so it’s easy for you to apply and it’s easy to sand too. A fine finish and strong repair Dry in just two hours Fills up to 20mm Suitable for indoor plaster, stone, concrete and wood High performance formula ensures the filler offers excellent adhesion
Multi Use Penetrating Oil Spray 400ML
Multi-use penetrating oil spray is a well established lubricant and rust remover. OB41 solves a number of problems with servicing, repairs, maintenance and production by helping unfasten connections such as screwed joints, nuts and bolts which have become stuck through rust. Removes squeak & creak noises Long lasting corrosion protection Releases rusted screws & bolts Greases sliding surfaces Ideal for cycle maintenance
OB1 Grip & Grab Adhesive is a unique solvent free construction adhesive with an exceptionally high initial grab followed by an incredible structural bond. It can be applied to Concrete, Most Stones, Ceramic, Marble, Wood, Gypsum Board, Metals, Lead, Glass, Mirror, Plastics (Excluding Polypropylene) and any combination of the above without any additional fixings.
OB1 Multi Surface Cleaner is the most advanced solvent degreaser that leaves no residue, is safe to use on painted surfaces, vinyl, glass and most plastics. Key Description Points Advanced cleaning performance: Fast‑acting solvent degreaser that evaporates quickly and leaves no residue. Safe on many surfaces: Suitable for painted surfaces, vinyl, glass, most plastics and rubbers. Effective removal: Dissolves and removes adhesive residues, silicone, wax, grease, tar, stickers, duct tape residue and more. Surface preparation: Ideal for prepping surfaces before applying sealants, adhesives or paint. Other uses: Cleans tools and workshop equipment safely, and degreases mechanical parts (e.g., motors, brakes, suspension) without attacking plastics.
OB1 Sealant and Adhesive 290ml
A hybrid polymer sealant and adhesive designed for multi‑surface bonding and sealing. It replaces traditional mastics, wood/PU adhesives, silicone, acrylic and rubber sealants in one product. The solvent‑free, odourless formulation will not crack or shrink, even when applied on wet surfaces or underwater. It bonds and seals materials such as metals (including lead), plastics (PVC & GRP), wood, glass, mirror, concrete and more. It’s suitable for interior and exterior use, with high resistance to fungal and bacterial growth and remains flexible once cured
Everbuild Opti-Mix Mortar Plasticiser is a highly concentrated, air-entraining liquid plasticising admixture designed to improve the properties and performance of mortar mixes. It comes in a self-gauging 1 L bottle. Key Features Highly concentrated formula – 1 L of Opti-Mix is equivalent in performance to approximately 25 L of conventional mortar plasticiser, reducing waste and storage needs. Air-entraining action – forms stable microscopic air bubbles within the mortar mix to improve workability. Application Notes Typical dosage is 5–10 ml per 50 kg of cement. Add the product to the gauging water before mixing with dry materials — do not mix directly into the dry components.
Recticel Eurothane® GP PIR insulation board is a lightweight, high-performance rigid foam board for pitched roofs, framed and internal walls, floors and ceilings. Each 2400 x 1200mm board is faced on both sides with a gas diffusion-tight multilayer foil and delivers a thermal conductivity of just 0.022 W/mK, so you can hit strict U-value targets with a thinner build-up than mineral wool or EPS. Straight edges allow tight, easy butt joints, and the board is quick to cut, handle and install on site. Rated Euroclass F to EN 13501-1 and BBA certified (25 to 160mm), it's a trusted alternative to Celotex and Kingspan PIR boards. Stocked in 25, 50, 70, 90, 100, 140 and 150mm thicknesses. In stock now for click & collect.
Plasterboard 1800 x 900 x 9.5mm
This wallboard was created from the highest quality gypsum, making this standard wallboard a versatile option that can be used for partitions, walls and ceilings. You can fit this plasterboard in multiple layers to improve its performance. This is a perfect choice for projects with standard performance requirements, and it is cost-effective, helping you keep the costs of your projects down.
This plasterboard was created from the highest quality gypsum, making this standard wallboard a versatile option that can be used for partitions, walls and ceilings. You can fit this plasterboard in multiple layers to improve its performance. This is a perfect choice for projects with standard performance requirements, and it is cost-effective, helping you keep the costs of your projects down. Its Ivory Paper Face makes it ideal for direct decoration or a plaster finish.
This wallboard was created from the highest quality gypsum, making this standard wallboard a versatile option that can be used for partitions, walls and ceilings. You can fit this plasterboard in multiple layers to improve its performance. This is a perfect choice for projects with standard performance requirements, and it is cost-effective, helping you keep the costs of your projects down. Its Ivory Paper Face makes it ideal for direct decoration or a plaster finish.
This wallboard was created from the highest quality gypsum, making this standard wallboard a versatile option that can be used for partitions, walls and ceilings. You can fit this plasterboard in multiple layers to improve its performance. This is a perfect choice for projects with standard performance requirements, and it is cost-effective, helping you keep the costs of your projects down. Its Ivory Paper Face makes it ideal for direct decoration or a plaster finish.
Polythene 300Mu/1200g 4x25m Black
300MU Damp Proof Membrane is a low density, blown film of extruded polythene. It is intended for the use with concrete flooring. DPM sheeting can be used as an over-site membrane, being used between a blinded hardcore bed and the base concrete, or as a sandwich membrane between the base and concrete screed or just in base concrete. Black Agrément Certificate Accredited by the Board of Agrément (BBA: 94/3009) Manufactured using over 90% recycled materials 4m width x 25m length DPM roll coverage: 100m²
Polythene Tps 4.5Kg 4 x 25m H/D
Our general-purpose sheeting is produced from recycled material and is manufactured within strict tolerances under ISO 9001, this ensures a high-quality product. A temporary, fully waterproof protection sheet Designed to protect floors and equipment during work Recommended interior use only
Polytop Nails Dark Brown (100)
Polytop Nails perfect for using with our Kalsi Plastic PVC
uPVC nails with white heads and A4 stainless steel shanks are specialized fasteners designed for specific construction and DIY applications, especially for securing uPVC (unplasticized polyvinyl chloride) components. Here’s a detailed description: Features: Head: White-coated head for an aesthetic finish. Blends seamlessly with uPVC materials, especially white uPVC profiles like fascia, soffits, and cladding. Material: Shank made from A4 stainless steel (Marine Grade 316), ensuring excellent resistance to corrosion, even in harsh or coastal environments. Durable and long-lasting material suitable for outdoor applications. Shank: Ring-shanked for enhanced grip and holding power. Designed to prevent loosening over time, even under thermal expansion or contraction. Size Options: Available in various lengths and diameters to suit different requirements. Applications: Primarily used for fixing uPVC elements such as cladding, fascia boards, and soffits. Suitable for outdoor and coastal applications where high corrosion resistance is required. Benefits: Quick and easy installation. Provides a clean and professional finish. Resistant to rust and weathering, making it ideal for long-term use. Key Considerations: Ensure proper length selection for secure fastening. Use appropriate tools to avoid damaging the white-coated head during installation. These nails are a reliable and aesthetically pleasing option for professionals and DIY enthusiasts working with uPVC materials.
Polytop Nails perfect for using with our Kalsi Plastic PVC
Postcrete Fast Setting Concrete Mix
Postcrete is a fast-setting concrete mix designed for securing posts, such as fence posts, gate posts, or decking supports, into the ground. It is a convenient and efficient solution for projects where quick installation is necessary. Features of Postcrete: Fast Setting: Sets in 5-10 minutes, making it ideal for quick installations. Ready-to-Use: Comes pre-mixed; no additional sand, gravel, or cement is required. Convenient Packaging: Typically available in bags that can be directly poured into the hole. Strong and Durable: Once set, it forms a solid base for stability. How to Use Postcrete: Dig the Hole: Ensure the hole is deep and wide enough for the post and the concrete. Position the Post: Place the post in the hole and ensure it's level. Pour the Postcrete: Empty the Postcrete into the hole around the post. Add Water: Pour clean water over the Postcrete as per the instructions on the bag (usually 2-3 liters per bag). Adjust Quickly: As it sets rapidly, ensure the post is properly aligned before the Postcrete hardens. Allow to Set: Let the concrete cure for at least a few hours before applying stress. - Full Pallet Qty 70, Please note full pallets can be shipped to the uk mainland usually in 1-2 days, please call for a quote.
Beatsons Premium Washed Building Sand is a fine, soft sand for mixing bricklaying and pointing mortar. Washing removes the clay, silt and organic debris that cause mortar to shrink, crack and weaken, so joints stay tight and look cleaner for longer. Its fine, consistent grain blends easily with cement and water for a smooth, workable mix that holds well on the trowel. It is ideal for brickwork, blockwork, pointing, masonry repairs and general building work on domestic and trade projects. It is available in approx. 850kg bulk bags, covering around 10m² at 50mm depth, or handy 20kg small bags for quick repairs. Choose direct site delivery or Click & Collect.
Ready Mix Concrete delivered via volumetric mixer. Flexible, efficient, tailored to any volume or project—available across Central Scotland. *PLEASE NOTE, SOMEONE IN THE TEAM WILL BE IN CONTACT TO CONFIRM YOUR ORDER. C8/10 - ST1, ST2 (For: floor blinding, foundations for steps, void fill) C12/15 - ST3 (For: Lightweight kerbing, internal floor slabs) C16/20 (For: Fence posts, paving for patios, greenhouses) C20/25 - ST4 (For: Hot tub & shed bases, garden wall foundations) C25/30 - ST5 (For: Kennels, stables, workshop & house foundations) C28/35 (For: Reinforced house foundations, driveways and garage floors) C32/40 (For: HGV parks, agricultural yards, septic bank) C35/45 & C40/50 - (For: Wind turbine bases, heavy industrial applications) Or if you are unsure Call for Quote: 01259 235 742 Unsure of how much you'll need?? -Concrete Calculator
This product is Code 5 Lead. Rolled lead sheet has been awarded BRE Green Guide ratings of A and A+ when manufactured to British Standard BS EN12588. As a material Enviro Lead is 100% recyclable and the advantages of its use are vast when compared to other materials used for the same purpose. Enviro Rolled Lead Sheet and Flashings can be formed around all areas where water ingress is high risk such as chimney base & rooftile abutments, roofing tiles and brickwork of a building. Lead sheet has been in use as a building material for centuries. Lead sheet adorns the roofs of churches, offices, factories, public buildings and homes throughout the United Kingdom because of its ease of use, durability and the pleasing grey colour of its protective patina. Lead sheet is easily shaped, is long lasting and flexible in all weather conditions. Lead sheet is easy to install and will out-perform other building materials, if the rules of good practice are followed. Lead is 100% recyclable time after time.
The Strip-Out Tool is a unique patented tool which works on any type of sealant and is the ideal partner for use before applying Forever White silicone sealant. The Strip-Out Tool is incredibly simple and its design and shape provides a really quick way to strip all types of sealant out of any 90° angle joint.
Sika®-1 Waterproofer is an aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied sand/cement renders, screeds and mortar to provide an effective barrier against the transmission of liquid water. Used: for structural screeds to resist water pressure below ground when used in conjunction with Sika®-1 pre-batched mortars; waterproof renders to resist moisture above ground; internal below ground basement waterproofing; general waterproofing admixture for mortar.
Everbuild 501 Universal PVA Bond is a multi‑purpose bonding agent, primer, sealer and admixture used widely in construction and DIY. It’s a medium‑viscosity polyvinyl acetate (PVA) emulsion, stabilized with polyvinyl alcohol and externally plasticised with a vinyl acetate homopolymer. It does not contain harmful phthalates. Key Uses Acts as a general‑purpose adhesive for wood, cork, paper, textiles and other porous materials. Used as an admixture in mortar, screeds and renders to improve performance. Works as a bonding agent for screeds and renders to poorly bonded or dense substrates (concrete, tiles, etc). Can be applied as a primer/sealer before plastering or tiling to seal porous surfaces. When mixed with materials (e.g., wood shavings and plaster), it can be used as an internal filler.
SikaBond PVA+ D2 Bonding Agent
Sikabond PVA+ / similar SikaBond PVA D2 is a polyvinyl acetate (PVA)‑based bonding agent — a white, water‑based liquid used as a general‑purpose adhesive, primer, sealer and admixture in building and renovation work. It is classified to EN 204:2016 as a D2 wood adhesive, meaning it meets specific standards for interior moisture resistance and bonding performance. Typical Uses SikaBond PVA D2 is highly versatile and can be used for: ✔ Bonding plaster, wood, paper, textiles, cork and other porous materials. ✔ Acting as a bonding agent for plaster, cement screeds and render to sound substrates such as concrete, brick or stone. Sika UK ✔ Primer & sealer before plastering, tiling or painting to improve adhesion and reduce suction. Sika UK ✔ Mortar admixture to improve adhesion in screeds, renders or repair mortars. Sika UK ✔ Filling applications (e.g., mixed with wood shavings or plaster as an internal filler).
SolarTile Solar Panel Kit (With Inverter)
Marley roof-integrate solar panel roof tiles act as both a roof covering and electricity generating solution. Pick from the pre-built kits of our 405wp panels (which includes everything you need) to suit your requirements. 4 Panel Portrait – Height: 3954mm Width: 2558mm 6 Panel Portrait - Height: 3954mm Width: 3722mm 8 Panel Portrait - Height: 3954mm Width: 4886mm 10 Panel Portrait - Height: 3954mm Width: 6050mm 12 Panel Portrait - Height: 3954mm Width: 7214mm All sizes are to the outside of the flashing 4 Panel Landscape - Height: 2778mm Width: 3734mm 6 Panel Landscape - Height: 2778mm Width: 5486mm 8 Panel Landscape - Height: 2778mm Width: 7238mm 10 Panel Landscape - Height: 2778mm Width: 8990mm 12 Panel Landscape - Height: 2778mm Width: 10742mm All sizes are to the outside of the flashing If you wish to read more about this product such as product information , datasheets & design details - View Marley SolarTile Roof Systems Brochure
Sound Panel 2400x1200x12.5mm TE
Knauf Sound Panel offers enhanced levels of sound performance and a greater density, making it ideal for residential applications or where a minimum of 10kg/m2 is required.
Used over a movement joint in a run of brickwork or blockwork with safety embedment detail or plain end (B20). (Sleeve supplied as extra). ** SLEEVE NOT INCLUDED**
Beatsons 7N Concrete Blocks are strong, durable concrete masonry units designed for a wide range of load-bearing and general construction applications. Available in 100mm and 140mm widths, these blocks provide a compressive strength of 7N/mm², making them ideal for structural walls, foundations, cavity wall construction and internal partitions in residential and commercial building projects.
OB1 Surface Sanitiser Spray is a specially formulated alcohol based cleaner perfect for industrial or commercial operations. Supplied in conveniently sized, portable aerosol cans the product can quickly be applied across large areas. Fast drying and with a pleasant odour, this product can be used to disinfect rooms without causing major disturbances to normal usage or introducing strong, unpleasant smells. Alcohol based sanitisers have been found to be effective at combating many types of bacteria and viruses. Features Alcohol based sanitiser (over 80% alcohol) High Coverage – Covers large areas quickly and easily Fast Application Fully Portable System Self contained, no need for external compressor or other pressure equipment
TF50 Timber Frame 50mm Cavity Wall Lintel - 100mm
TIMBER FRAME 50MM CAVITY WALL LINTEL – 100MM Pinch batten must be used. Other cavity sizes available. Features We are the only lintel manufacturer to hot-dip galvanize after fabrication providing up to 50% more zinc protection than other approved coatings Supergalv coating offers a superior life expectancy Post-fabrication galvanizing leaves no surface with inferior paint protection
Thistle MultiFinish Plaster 25kg
British Gypsum Thistle Multi finish plaster is designed for use on a wide range of backgrounds from low suction (plasterboard) to medium-high suction (gypsum or cement-based undercoat plasters). Also suitable for use on dry undercoats (dampen background first) and damp undercoats. Providing a smooth, flat, and high-quality finish Thistle Multi-finish is easy to use and only requires the addition of water to prepare it for use. It covers an area of 10m² when skimmed with a 2mm layer. PLEASE NOTE :- Return Policy on plaster products: Due to the volatility of plaster products, once delivered or collected we regret that we are UNABLE to accept materials back for credit.
Thompson's Water Seal uses a unique micro silicone emulsion to stop water penetration. Apply Water Seal directly onto damp surfaces to provide long lasting waterproof protection within hours. - Apply directly to damp surfaces - Stops freeze thaw damage - Use on brick, concrete and stone
Attaches trusses and rafters to wall plates to provide wind restraint. Avoids skew nailing damage and provides positive resistance to wind forces. Safe working load 2.38kN uplift.
Type A Prestressed Concrete Lintel
The Type A Prestressed Concrete Lintel is a high-strength structural support designed to carry masonry loads above door and window openings. Manufactured using high-tensile steel strands that are tensioned before casting, this prestressed design delivers superior load-bearing capacity while maintaining a slim, efficient profile. Ideal for domestic and light commercial construction, Type A lintels are suitable for supporting brick, block, and cavity wall construction where standard duty loading is required.
Type K9 Prestressed Concrete Lintel
The Type K9 Prestressed Concrete Lintel is a heavy-duty structural lintel designed to provide reliable support over door and window openings in masonry construction. Manufactured from high-strength concrete with integrated prestressed steel reinforcement, it delivers excellent load-bearing performance while maintaining a slim, practical profile. Engineered to reduce deflection under load, the K9 lintel offers enhanced strength compared to standard reinforced concrete lintels, making it suitable for domestic, commercial, and light industrial applications. It is ideal for supporting block, brick, or stonework above structural openings.
Type U2 Prestressed Concrete Lintel
The Type U2 Prestressed Concrete Lintel is a high-strength structural lintel designed to provide reliable load support over door and window openings in masonry construction. Manufactured using quality concrete and high-tensile prestressed steel reinforcement, it delivers superior strength, durability, and long-term performance. Suitable for use in brick, block, and cavity wall applications, the U2 lintel is engineered to safely distribute masonry loads while minimising deflection and cracking. Its robust construction makes it ideal for domestic, commercial, and light industrial projects.
Universal Wall Starter C25S 2.3m
The Vista Stainless Steel Wall Starter System joins new walls to existing masonry. Suitable for both internal and external brick or block walls from 60 to 250mm thick, the connectors can be slotted together up to a maximum of 8 metres or 3 storeys high. Stainless Steel Easy connection of new masonry walls 60mm to 250mm wide to existing masonry Pack includes all fixings for a single ski of masonry up to 2400mm high and comes with full instructions. SOLD separate or in a box of 20 (trade pack)
Debonding sleeve to allow for movement of the ties listed above (a 25mm wide sleeve is required for channel ties). Debonding sleeves should have a 10mm gap left at end to allow for movement once installed.
A nail plate system for manual use which enables the construction of timber structures on site to strengthen joints for non-structural applications. Automated production ensures uniform hole positions.
V61 Timber Kit Ties (50mm Cavity) ( box of 250)
Stainless Steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height of 15m and cavity widths from 50-100mm. Design- Masonry-timber tie for timber frame buildings that accommodates vertical movements. Material - Manufactured from grade 304 stainless steel Behaviour in relation to fire - Non combustible ( as defined in the national building regulations) Compliance - Tested as Type B (sound) and as Type 6 (strength) to BS EN 845-1
Vapour Panel 2400 x 1200 x 12.5mm
GTEC Standard Board with an additional laminated vapour control layer. The GTEC vapour board has the same physical property as the standard board but has a silver metallised polyester film back liner which enhances the vapour resistance of the product. GTEC Vapour can be jointed and finished with GTEC Jointing Systems. The boards require priming with GTEC Universal Sealer prior to decorating.
VE4 Housing Tie (200 & 225mm) (Box of 250)
light duty wall tie used in domestic dwellings. Suitable for buildings with a maximum height of 10m and cavity widths from 50-150mm (Type 4 wall tie). BBA Approved Material - Manufactured from grade 304 stainless steel Compliance- Tested as Type A (sound) and as Type 4(strength) to BS EN 845-1 Sizes 200 & 225mm
VE7 Galv Frame Cramp Ties 200mm
Frame cramp, for restraining masonry to new or existing structures and for building in non-structural elements (frames etc).
Vista Galv Movement Bead 19mm x 3.0m
Plaster and render bead. Designed to be used to form movement joints in plaster or render where long wall runs either have movement joints in situ or where there is a need to allow for differential or thermal movement. The bead consists of two plaster stop lengths joined by a white pvc extrusion which allows for up to 4mm of movement and which is covered by a vinyl tape which is removed after plastering or rendering. Internal use only. We recommend Stainless Steel or PVC-u for external rendering.
Wakaflex Lead Replacement 5m Light grey
Wakaflex Lead Flashing Alternative is a high quality, extremely flexible and robust flashing for pitched roof abutments and an alternative to traditional lead applications. Smooth surface with high stretchability of up to 50% in length and 15% in width, making it extremely versatile with a neat finish. BBA approved, UV resistant, 4-layer flashing with an integrated aluminium layer, making it very robust and durable. Self welding technology, means no specialist tools or training is needed, making it a cost-effective solution. Colour: Lead Grey Roll Length: 5m
Warmline XPS Insulated Plasterboard
Warmline XPS Insulated Plasterboards are designed as a simple and effective way to improve the thermal efficiency in walls and roof dwelling applications. They are fully applicable with Part L of building regulations. Square edge insulated plasterboard. Technical Specifications Product size: 1200mm x 2400mm m2 Per Board: 2.88 Overall (Foam*) Thickness: 27mm (17.5mm*), 35mm (25.5mm*), 40mm (30.5mm*), 45mm (35.5mm*), 55mm (45.5mm*) Foam Thickness: 17.5mm, 25.5mm, 30.5mm, 35.5mm, 45.5mm Plasterboard Thickness: 9.5mm Edge: Square Edge Thermal Conductivity: 0.034 or 0.035 W/mK Thermal Resistance: 0.56 m2k/W to 1.4 m2k/W
Beatsons Whin Dust is a 0-4mm crushed whinstone (basalt) aggregate, ideal as a sub-base and screeding layer for artificial grass, block paving, and garden pathways. Also known as quarry dust, its angular particles compact into a firm, moisture-resistant surface, offering superior binding and drainage compared to standard soft sand. Available in convenient 25kg bags or 850kg Bulk Bags, it suits small DIY jobs and larger landscaping projects alike. Sourced from durable Scottish basalt rock, Whin Dust resists wash-out and provides a stable, level base beneath paving flags, artificial turf, or driveways. Order online for Click & Collect or branch delivery across Scotland. Please note: customers in Glasgow and the surrounding area served by the Cumbernauld branch will receive Red Granite Sand as a substitute, as this is the only stock held at that branch.
Beatsons White Sand, also known as White Building Sand, White Mortar Sand, or FS1 sand, is a fine-grade silica sand with sub-rounded grains. Its consistent grain size and high silica content improve both the workability and strength of mortar mixes. It is the preferred choice for tradespeople and DIYers wanting a clean, light-coloured finish on brickwork, pointing, or rendering projects. Available in a 20kg bag for smaller jobs or an 850kg bulk bag for larger builds, it suits both domestic and commercial applications.
Our Galvanised Zinc Ridge Strap is a type of hardware used in roofing. These straps are designed to secure or fasten materials such as ridge tiles, sheets, or panels in place, providing additional stability and support. Here’s a typical description: Material: Made from high-quality galvanised steel to provide excellent resistance against corrosion and rust, ideal for outdoor and exposed environments. Purpose: Used to secure ridge tiles, roofing sheets, or other structural components, ensuring stability and durability. Features: Pre-drilled holes for easy installation. Flexible design to suit various applications and roofing profiles. High tensile strength for reliable performance under load. Applications: Widely used in roofing, fencing, and general construction where strong and durable fastenings are required. Sizes: Available in 12" & 14" lengths to suit your specific requirements. Finish: Galvanised (Electro) coating for long-lasting protection against harsh weather conditions.