Beatsons Mannok Therm QL PIR Insulated Plasterboard 2400x1200mm

Mannok Therm Laminate-Kraft / MLK PIR is a high performance, fibre free insulated board, with a kraft paper facing on one side and plasterboard bonded to the other side. Mannok Therm Laminate-Kraft / MLK PIR insulation is ideally suited to be used under rafters to reduce the overall heat loss through the roof and eliminate thermal bridging through the rafters. With the additional benefit of its paper facer, Mannok Therm Laminate-Kraft / MLK PIR insulation is also suitable for use in dry-lining applications fixed in place using dot-and-dab adhesive or mechanical fixings. *Mannok Therm Laminate-Kraft / MLK (previously Quinn Therm QL-Kraft) Total Thicknesses available: 37.5mm, 50.5mm, 62.5mm, 72.5mm, 82.5mm, 92.5mm, (select from the drop down menu) Plasterboard Thickness: 12.5mm Board Size: 2400mm x 1200mm  Coverage: 2.88m per board Thermal Conductivity: 0.022w/mk Facing: Paper facing on one side & plasterboard bonded to the other side

Beatsons EcoTherm Inno-Torch Flat Roof Insulation

Part of the Building Innovation product range, Inno-Torch flat PIR boards offer a thin and durable insulation solution for flat roofs. The boards are suitable for use with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems, on concrete, timber or metal decks. With thermal conductivities as low as 0.024 W/mK, Inno-Torch boards can allow you to achieve target U-values with slim constructions. Can be fitted with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems Suitable for use on new and existing concrete, timber and metal decks  Lightweight PIR insulation boards are easy to transport, cut and install

Beatsons Warmline XPS Insulated Plasterboard

Warmline XPS Insulated Plasterboards are designed as a simple and effective way to improve the thermal efficiency in walls and roof dwelling applications. They are fully applicable with Part L of building regulations. Square edge insulated plasterboard. Technical Specifications Product size: 1200mm x 2400mm m2 Per Board: 2.88 Overall (Foam*) Thickness: 27mm (17.5mm*), 35mm (25.5mm*), 40mm (30.5mm*), 45mm (35.5mm*), 55mm (45.5mm*) Foam Thickness: 17.5mm, 25.5mm, 30.5mm, 35.5mm, 45.5mm Plasterboard Thickness: 9.5mm Edge: Square Edge Thermal Conductivity: 0.034 or 0.035 W/mK Thermal Resistance: 0.56 m2k/W to 1.4 m2k/W

Beatsons Alumininum Foil Tape 50mm x 45.7m

Heat and Light reflective Aluminium Foil Tape, heat resistant to 180°C, Flame Retardant to Class O. Excellent moisture resistance, ideal for use as a vapour barrier between foil faced insulation panels in roof and wall applications, duct sealing on all types of air conditioning and ventilation and protecting wires and pipes from heat.