Brett Martin 87 1/2º Single Socket Bend

The Brett Martin 87½º Single Socket Bend is a high-quality soil and waste fitting designed to create a sharp change of direction in above-ground pipework. Manufactured from durable, impact-resistant PVC-U, it provides excellent long-term performance, resisting corrosion, chemicals, and everyday wear.   Its 87½º angle is ideal for near-vertical directional changes while maintaining efficient flow throughout the system. The single-socket design features a factory-fitted elastomeric seal, ensuring a watertight, secure joint and quick, reliable installation within Brett Martin’s soil system range.

Brett Martin - 45° Single Socket Bend

Brett Martin -  45° Single Socket Bend

Brett Martin 315mm 87 1/2º Double Socket Branch

315mm 87 1/2º Double Socket Branch

Brett Martin 200mm 45º Double Socket Branch

200mm 45º Double Socket Branch 315mM

Brett Martin 315mm x 45° Double socket Branch

A Brett Martin double socket branch is a underground drainage fitting made from tough PVC-U (uPVC), designed to join a main drainage run to a branch line at a 45° angle. It has two sockets (one for the main pipe and one for the branch) that accept pipes of specified diameters, allowing a smooth directional change and branch connection with minimal flow disruption. Key Features:   Angle: 45° branch from main pipeline — used to split or divert flows gently (rather than a blunt tee) which helps maintain better hydraulic flow performance. FlipHTML5 Double Socket Design: Both ends (main and branch) have sockets to accept pipes — enabling easier jointing and secure connections. Material: Durable PVC-U/uPVC, robust for underground sewer and drainage use. Colour: Terracotta (standard for underground drainage fittings). Standards: Typically manufactured to comply with BS EN 1401-1 (British/European standard for PVC-U sewer pipe systems), though you should verify the actual part’s certification for adoptable sewer use. Application: Ideal for use in gravity drainage systems (sewers, surface water, site drainage) where a branch off a larger main line at 45 degrees is required.

Brett Martin 30º Single Socket Bend

The Brett Martin 30º Single Socket Bend is a high-quality soil and waste fitting designed to provide a controlled change of direction in above-ground pipework. Manufactured from strong, impact-resistant PVC-U, this bend delivers long-lasting durability and excellent resistance to corrosion and everyday wear.   Its 30º angled design ensures smooth flow performance while enabling precise layout adjustments in domestic, commercial, and industrial installations. The single-socket configuration includes a factory-fitted elastomeric seal, offering a secure, watertight joint and quick, reliable installation with Brett Martin soil systems.

Brett Martin - 15º Single Socket Bend

The Brett Martin 15º Single Socket Bend is a precision-moulded soil and waste system fitting designed to provide a gentle change of direction within above-ground pipework. Manufactured from high-quality, impact-resistant PVC-U, this bend offers long-lasting durability and excellent resistance to corrosion and chemical wear.   Its 15º angle allows for subtle directional adjustment while maintaining smooth, efficient flow through the system. The single-socket design features an integrated rubber seal, ensuring a secure, watertight joint and quick, hassle-free installation.

Brett Martin 110mm 45º Double Socket Branch

The 110mm 45º Double Socket Branch (B25110/B31250) is designed for efficient and reliable drainage and sewage connections. Constructed from high-quality, durable PVC material, it ensures long-lasting performance, corrosion resistance, and ease of installation.

Brett Martin 110mm 45º Double Socket Branch

The 110mm 45º Double Socket Branch is a precision-engineered drainage fitting designed to create a smooth 45º diversion in underground pipework systems. Made from high-quality PVC-U, it offers long-lasting durability, excellent chemical resistance, and reliable performance in both domestic and commercial drainage applications.   The double socket design ensures secure, watertight connections on both the main run and the branch line, while the 45º angle provides efficient flow, reducing the risk of blockages and maintaining system integrity. Pre-fitted elastomeric seals simplify installation, delivering a fast and leak-free joint with compatible Brett Martin underground drainage pipes.

Brett Martin 87 1/2º Single Socket Bend

The Brett Martin 87½º Single Socket Bend is a high-performance underground drainage fitting designed to create a near-vertical change of direction within pipework systems. Manufactured from strong, durable PVC-U, this bend offers excellent resistance to impact, chemicals and long-term underground conditions.   The precision-engineered 87½º angle ensures efficient flow while maintaining system integrity in tight layout configurations. Its single-socket design features a factory-fitted elastomeric seal, delivering a secure, watertight connection and easy installation with Brett Martin underground drainage pipes.

Brett Martin 45º Single Socket Bend

The Brett Martin 45º Single Socket Bend is a high-quality underground drainage fitting designed to deliver a smooth and reliable change of direction within pipework systems. Manufactured from durable PVC-U, this bend offers excellent structural strength and long-term resistance to chemical and environmental factors. Its precision-moulded 45º angle provides efficient directional adjustment while maintaining optimum flow performance. The single-socket design includes a secure, factory-fitted elastomeric seal, ensuring quick installation and a watertight joint with Brett Martin underground drainage pipes.

Brett Martin 200x200mm 87 1/2º Double Socket Branch

The Brett Martin B20208 is a 200 mm × 200 mm double socket branch used in underground drainage systems. It’s a PVC fitting designed to join three pipes in drainage layouts where a branch connection is needed. The double socket branch typically has two in‑line sockets and one branch socket, making it suitable for directing flow from one pipe into a main run of two parallel pipes or similar configurations. Typical Use   Application: Part of an underground sewer or surface water drainage system. Function: Connects pipes of the same diameter (200 mm) with a branch outlet for another pipe of the same diameter. Material: Usually made from durable PVC plastic (common for Brett Martin underground drainage products). Standard Fitting: Likely complies with industry standards for underground drainage fittings.

Brett Martin 200mm 45º Double Socket Branch

Brett Martin 200mm x 160mm 87 1/2º Double Socket Branch

Brett Martin 200 mm × 160 mm Double Socket Branch, 87.5° (Underground PVC-U Sewer / Drainage Fitting) Key Details:   Manufacturer: Brett Martin (UK supplier of plumbing & drainage systems) Code/SKU: B20168 Type: Underground sewer/drain branch fitting, reducing junction (double socket branch) Dimensions: • 200 mm (8 inch) main pipe diameter • 160 mm (6 inch) branch diameter Angle: 87.5° branch junction Material: uPVC (unplasticized polyvinyl chloride) Features: • Double socket for easy join-in-place connections • Lightweight and easy to install • Typically kite-marked for quality/standard compliance  Use: Designed for underground drainage and sewer systems to connect a 160 mm branch into a 200 mm main run at ~87.5°

Brett Martin 160mm 45º Double Socket Branch

The 160mm 45º Double Socket Branch is a high-quality drainage fitting designed for underground pipework systems, providing a reliable method to divert flow at a 45º angle. Manufactured from robust PVC-U, it delivers long-lasting durability, excellent chemical resistance, and reliable performance in domestic, commercial, and industrial drainage applications.   The double socket design allows secure connections on both the main run and the branch line, while the 45º angle ensures smooth flow transition, reducing turbulence and the risk of blockages. Pre-fitted elastomeric seals provide a watertight joint and facilitate quick, easy installation with Brett Martin underground drainage pipes.

Brett Martin 250mm x 110mm 87 1/2º Double Socket Branch

The Brett Martin B20118 is a 200 mm × 110 mm × 87 ½° Double Socket Branch fitting manufactured from PVC and designed for use in underground sewer and drainage systems. It enables a branch connection between pipes of different diameters, where the main 200 mm sewer line continues straight and a 110 mm line branches off at an angle of 87½°. This is a PVC-U double socket branch fitting used in underground sewerage and drainage systems. It connects a main pipeline to a branch pipeline:   Main pipe size: 200 mm diameter Branch pipe size: 110 mm diameter Branch angle: 87½° (approx 87.5°) Such branches are used where a smaller pipe line splits off from a larger main sewer or drain.  

Brett Martin 30º Single Socket Bend

The Brett Martin 30º Single Socket Bend is a durable and high-performance drainage fitting designed to provide a smooth change of direction within underground pipework systems. Manufactured from robust, high-quality PVC-U, this bend delivers long-lasting reliability and excellent resistance to chemical and environmental wear. Suitable for both residential and commercial drainage applications, the fitting features a secure single-socket design with an integrated rubber seal, ensuring a watertight connection and easy installation. The 30º bend angle allows for precise layout adjustments while maintaining optimal flow efficiency within the drainage network.

Brett Martin Double Socket PVC (BS) Coupler

Brett Martin Kitemark Pipe BS548 6M Single socket

Key Features & Benefits Easy, secure jointing: The single socket end comes with a lip / ring (and compression) seal, providing a watertight joint that’s also resistant to dislodgement. Durable and long‑lasting: PVC‑U construction resists corrosion, environmental degradation, and handles underground loads (thanks to SN8 rating). Lightweight yet strong: Easier to handle on site than heavier materials (e.g. concrete), but with sufficient strength for underground drainage applications. Versatile for drainage use: Suitable for underground drainage systems — both for waste sewerage and surface water drainage depending on the system design and associated fittings. Part of a full drainage system: Works within a broader range of fittings, bends, couplers, branches, plugs etc — all from Brett Martin’s underground drainage catalogue.