Beatsons Postcrete Fast Setting Concrete Mix

Postcrete is a fast-setting concrete mix designed for securing posts, such as fence posts, gate posts, or decking supports, into the ground. It is a convenient and efficient solution for projects where quick installation is necessary. Features of Postcrete: Fast Setting: Sets in 5-10 minutes, making it ideal for quick installations. Ready-to-Use: Comes pre-mixed; no additional sand, gravel, or cement is required. Convenient Packaging: Typically available in bags that can be directly poured into the hole. Strong and Durable: Once set, it forms a solid base for stability. How to Use Postcrete: Dig the Hole: Ensure the hole is deep and wide enough for the post and the concrete. Position the Post: Place the post in the hole and ensure it's level. Pour the Postcrete: Empty the Postcrete into the hole around the post. Add Water: Pour clean water over the Postcrete as per the instructions on the bag (usually 2-3 liters per bag). Adjust Quickly: As it sets rapidly, ensure the post is properly aligned before the Postcrete hardens. Allow to Set: Let the concrete cure for at least a few hours before applying stress. - Full Pallet Qty 70, Please note full pallets can be shipped to the uk mainland usually in 1-2 days, please call for a quote.  

Beatsons Hanson Fast Set Postcrete 20Kg

Hanson Fast Set Postfix is simple to use (just add water) and fast-setting concrete for fixing posts into the ground. Sets in under 3 minutes – ideal for jobs where speed is essential. Suitable for tradesmen, DIYers and local authorities. One bag makes enough for one post. Easy to use (just add water).  How Much water for a 20kg bag of postcrete? To mix a 20kg bag of Postcrete, you usually need to add around 2.5 to 3 liters of water. However, always refer to the instructions on the bag, as water requirements can vary depending on environmental conditions and the desired consistency of the mix. Features & benefits Conforms to BS EN 9001 Weatherproof plastic packaging – suitable for outdoor storage. Easy to use – just add water 2.5 to 3 Liters One bag = one post Aggregate mix for increased initial support of post