Beatsons Build it mortar 20kg

Build It Mortar in Pennine finish is a high-quality, pre-mixed mortar ideal for bricklaying, blockwork, and general masonry projects. Supplied in convenient 20kg weather-resistant bags, this ready-to-use mix provides excellent workability and consistent performance for both domestic and commercial applications. Its attractive Pennine grey tone offers a clean, professional finish that complements a wide range of brick and stone types. Just add water and mix for a reliable, durable bond.   Colour: Grey tone Bag Size: 20kg Pre-mixed for convenience Consistent strength and smooth finish Suitable for brick, block, and stone Ideal for internal and external use

Beatsons British Gypsum Thistle Bonding Coat

Thistle Bonding Coat is an ideal base coat plaster for smooth or low suction backgrounds such as tiling, concrete, plasterboard or surfaces treated with Thistle Bond-it. The fine mix allows for improved workability, making it easier to spread, rule and Darby. Thistle BondingCoat is a lightweight, retarded hemihydrate that is pre-mixed gypsum plaster incorporating exfoliated vermiculite aggregate, which only requires the addition of clean water to prepare it for use. With a final coat of any Thistle finish plaster, Thistle BondingCoat provides a smooth, inert, high quality surface to internal walls and ceilings, and a durable base for the application of decorative finishes.

Beatsons Postcrete Fast Setting Concrete Mix

Postcrete is a fast-setting concrete mix designed for securing posts, such as fence posts, gate posts, or decking supports, into the ground. It is a convenient and efficient solution for projects where quick installation is necessary. Features of Postcrete: Fast Setting: Sets in 5-10 minutes, making it ideal for quick installations. Ready-to-Use: Comes pre-mixed; no additional sand, gravel, or cement is required. Convenient Packaging: Typically available in bags that can be directly poured into the hole. Strong and Durable: Once set, it forms a solid base for stability. How to Use Postcrete: Dig the Hole: Ensure the hole is deep and wide enough for the post and the concrete. Position the Post: Place the post in the hole and ensure it's level. Pour the Postcrete: Empty the Postcrete into the hole around the post. Add Water: Pour clean water over the Postcrete as per the instructions on the bag (usually 2-3 liters per bag). Adjust Quickly: As it sets rapidly, ensure the post is properly aligned before the Postcrete hardens. Allow to Set: Let the concrete cure for at least a few hours before applying stress. - Full Pallet Qty 70, Please note full pallets can be shipped to the uk mainland usually in 1-2 days, please call for a quote.  

Beatsons Thistle MultiFinish Plaster 25kg

British Gypsum Thistle Multi finish plaster is designed for use on a wide range of backgrounds from low suction (plasterboard) to medium-high suction (gypsum or cement-based undercoat plasters). Also suitable for use on dry undercoats (dampen background first) and damp undercoats. Providing a smooth, flat, and high-quality finish Thistle Multi-finish is easy to use and only requires the addition of water to prepare it for use. It covers an area of 10m² when skimmed with a 2mm layer. PLEASE NOTE :- Return Policy on plaster products: Due to the volatility of plaster products, once delivered or collected we regret that we are UNABLE to accept materials back for credit.

Beatsons Floor Levelling Compound 708 20Kg

Everbuild 708 Self Levelling Floor Compound is a cement based product used to level out uneven floors and screeds prior to laying ceramic tiles, thermoplastic tiles, lino, wood block flooring or carpet. Mix with either water or EVERBUILD FLOOR FLEX PLUS to give a free flowing self levelling topping. When mixed as directed, the compound provides a free flowing mix that sets in 90 minutes and can be overlaid after only 8 hours at normal temperatures. NOTE: This product is not suitable for use as a final wearing surface. Size: 20kg.

Beatsons Hanson Fast Set Postcrete 20Kg

Hanson Fast Set Postfix is simple to use (just add water) and fast-setting concrete for fixing posts into the ground. Sets in under 3 minutes – ideal for jobs where speed is essential. Suitable for tradesmen, DIYers and local authorities. One bag makes enough for one post. Easy to use (just add water).  How Much water for a 20kg bag of postcrete? To mix a 20kg bag of Postcrete, you usually need to add around 2.5 to 3 liters of water. However, always refer to the instructions on the bag, as water requirements can vary depending on environmental conditions and the desired consistency of the mix. Features & benefits Conforms to BS EN 9001 Weatherproof plastic packaging – suitable for outdoor storage. Easy to use – just add water 2.5 to 3 Liters One bag = one post Aggregate mix for increased initial support of post

Beatsons Hanson Sand Cement Mortar 20kg

Key Features & Benefits M6 Strength Grade: Engineered for superior performance, structural durability, and optimal bonding. Ready to Use: Pre-mixed formula—just add clean water to achieve your desired working consistency. Weatherproof Packaging: Supplied in tough polythene packaging, making it suitable for outside job-site storage. Versatile Applications: Ideal for bricklaying, blockwork, pointing, rendering repairs, and patching jobs. Convenient 20kg Bag: Single-man handleable size designed to minimize waste on smaller building projects. Fully Compliant: Manufactured to conform with BS EN 998-2 / BS EN 9001 standards for quality assurance.

Beatsons Hanson Ready Mix 40N Concrete 20kg

Hanson 20kg Readymix Concrete 40N Mix is a pre-mixed, high-strength concrete blend supplied in a 20 kg bag, designed to deliver reliable concrete right on site with minimal fuss — simply add water and mix to use. Key Features   High compressive strength (40 N/mm²): Provides a stronger finish than standard mixes, suitable for structural and heavy-duty tasks once cured. Pre-batched mix: Cement, sand and coarse aggregates are pre-blended in the correct proportions — just add clean water. Easy to use: No need for on-site mixing of separate materials — ideal for DIY or trade jobs. Versatile applications: Suitable for footings, foundations, steps, paths, manholes, repairs and other general concrete work. Coverage: One 20 kg bag mixed with around ~2 L of water produces ~0.008 m³ of concrete — covering roughly 0.10 m² at 75 mm depth or 0.08 m² at 100 mm depth. Standards: Complies with relevant British standards for high-strength ready-mixed concrete.