Blue Circle Hydraulic White Peak NHL 3.5 25kg

The NHL 3.5 Hydraulic Lime 25 kg White Peak Blue Circle is a high-quality natural hydraulic lime designed for use in traditional masonry, conservation and general construction applications. Classified as NHL 3.5, it offers a balanced combination of strength, flexibility and breathability, making it suitable for both internal and external use.   Widely specified for heritage restoration, repointing, bricklaying and stonework, NHL 3.5 sets through a combination of hydration and carbonation, allowing moisture to escape while providing durable structural performance. Supplied in a 25 kg paper bag, it is suitable for professional and specialist building projects. Available in pallet quantities of 56 bags for efficient site supply.   Key Features White Peak Blue Circle NHL 3.5 hydraulic lime   Natural hydraulic lime with moderate strength   Breathable and flexible for traditional construction   Suitable for internal and external applications   Ideal for masonry, brickwork and stonework   Supplied in a 25 kg paper bag   56 bags per pallet  

Azpects EasyJoint Select 12.5kg Paving & jointing compound

EASYJoint is the original sweep-in jointing Compound and still the best truly "All Weather Paving Joint Compound" available and made in the UK. Do not be fooled by others making similar claims. Azpects sell tens of thousands of tubs of EASYJoint every month to satisfied customers all over the UK and to parts of Europe.

STS NoMorePly SBR Primer 1L

NoMorePly® SBR Primer is a Premium latex based waterproof primer. It is used to seal the surface of NoMorePly® boards to improve the bonding strength of the tile adhesive. It helps to reflect heat which enhances the insulation value of NoMorePly to make it better for use with underfloor heating.  It provides a waterproof coating to make it ideal for use in wetrooms and bathrooms.   It can also be used as an adhesive additive for extra flexibility or as a general usage construction primer. A must-have for any tiler’s toolkit, this primer enhances the physical performance of mortars including adhesion, durability, flexibility, waterproofing and workability. Adding NoMorePly® Primer helps permit feather edging of repair mortars, and prepares backgrounds and substrates for wall or floor tiling. NoMorePly® Primer is also useful as a primer before tile fixing, providing extra protection for peace of mind.

UB11 Slate Vent 380 X 285

Ubbink's UB11 (380mm x 285mm) is an in-line unit with a multipurpose base which will provide inconspicuous ventilation in natural and manmade slate roofs. Can be installed with either 500mm x 250mm or 600mm x 300mm slate vents.Ubbink's Vepac (382mm x 398mm) is an in-line unit which should not need trimming when installing with 600mm x 300mm slates.Vepac vents are suitable for high or low level ventilation in roofs of 25° and over. Each vent has a slotted inhibitor to keep out large insects and vermin and provides a free vent area of 10,750mm².

Beatsons Soffit Vent Mesh Roll (30 Metres x 75mm)

Beatsons Chimney Pot - Elephant's Foot Buff

The Elephant foot ventilation terminal is used to maintain airflow and prevent condensation within a redundant flue. It is an effective and simple solution to the structure of an unused chimney, requiring minimal alteration work.

Beatsons Chimney Pot - Elephant's Foot Red

The Elephant foot ventilation terminal is used to maintain airflow and prevent condensation within a redundant flue. It is an effective and simple solution to the structure of an unused chimney, requiring minimal alteration work.

Beatsons Chimney Roll Top Pot Red

A traditional roll top chimney pot suitable for use with most solid fuel fires and appliance  - Type 0 clay flue terminals in accordance with BS EN 13502:2002 are open-topped design, characterised by the open-topped unrestricted flue gas flow path through the terminal. - To be fixed onto a masonry chimney stack, over the flue liner, to convey combustion gases from a solid fuel fire safely into the atmosphere. 

Beatsons Chimney Roll Top Pot Buff

A traditional roll top chimney pot suitable for use with most solid fuel fires and appliances. Type 0 clay flue terminals in accordance with BS EN 13502:2002 are open-topped design, characterised by the open-topped unrestricted flue gas flow path through the terminal. - To be fixed onto a masonry chimney stack, over the flue liner, to convey combustion gases from a solid fuel fire safely into the atmosphere.

Kalsi Plastics Polytop Plastic Anthracite

Polytop Nails perfect for using with our Kalsi Plastic PVC

TIMco 4mm Drywall Metal Stud Plasterboard Screws (Box of 1000 Screws)

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness.   • Phillips No.2 recess for a positive drive • Bugle head to reduce likelihood of damaging the board surface • 25° super sharp point for ease of penetration • 60° twin-thread offers excellent pull-out values and insertion speed   Technical Specifications Thread Diameter (mm) - 4 Recess Type - Phillips Material - Carbon Steel Finish - Black Phosphate Corrosion Rating (1-5) 1 - Clean dry & low humidity environments

Kalsi Plastics Polytop Pins White

uPVC nails with white heads and A4 stainless steel shanks are specialized fasteners designed for specific construction and DIY applications, especially for securing uPVC (unplasticized polyvinyl chloride) components. Here’s a detailed description: Features: Head: White-coated head for an aesthetic finish. Blends seamlessly with uPVC materials, especially white uPVC profiles like fascia, soffits, and cladding. Material: Shank made from A4 stainless steel (Marine Grade 316), ensuring excellent resistance to corrosion, even in harsh or coastal environments. Durable and long-lasting material suitable for outdoor applications. Shank: Ring-shanked for enhanced grip and holding power. Designed to prevent loosening over time, even under thermal expansion or contraction. Size Options: Available in various lengths and diameters to suit different requirements. Applications: Primarily used for fixing uPVC elements such as cladding, fascia boards, and soffits. Suitable for outdoor and coastal applications where high corrosion resistance is required. Benefits: Quick and easy installation. Provides a clean and professional finish. Resistant to rust and weathering, making it ideal for long-term use. Key Considerations: Ensure proper length selection for secure fastening. Use appropriate tools to avoid damaging the white-coated head during installation. These nails are a reliable and aesthetically pleasing option for professionals and DIY enthusiasts working with uPVC materials.

Kalsi Plastics Polytop Nails Dark Brown (100)

Polytop Nails perfect for using with our Kalsi Plastic PVC

TIMco 3.5mm Drywall Metal Stud Plasterboard Screws (Box of 1000 Screws)

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness.   • Phillips No.2 recess for a positive drive • Bugle head to reduce likelihood of damaging the board surface • 25° super sharp point for ease of penetration • 60° twin-thread offers excellent pull-out values and insertion speed   Technical Specifications Thread Diameter (mm) - 3.5 Recess Type - Phillips Material - Carbon Steel Finish - Black Phosphate Corrosion Rating (1-5) 1 - Clean dry & low humidity environments

Beatsons Viper Galvanised Ring Nail

Boxes of Collated Galvanised nails for a nail gun, These nails come with a gas canister. Comes in sizes 50mm, 64mm, 75mm and 90mm. *Please note that the 90mm are smooth and not a ring nail.   - 90mm and 75mm come with 2200 nails  - 50mm and 64mm come with 3300 nails

Klober Half Round Ridge End Cap

Uni-Click Dry Verge is designed to provide a mortar free and secure method of fixing concrete interlocking verge tiles. Its neat interlocking design provides a consistent appearance that requires no maintenance. The system is available in four colours to blend in with the roof line and fit most profiles of concrete interlocking tiles, between 260 - 350mm batten gauge.

Klober Uni Angle Ridge Cap

 Klober Universal Angle Ridge End Cap - Pair is designed for using with Uni-Dry and Uni-Click dry verge systems. Made with a domed top to perfectly suit round ridge roofs and very easy to install with no special tools or mortar required. 

Klober D/Roman Inline Vent

Double Roman Tile Vent is one of many vents by Klober that work alongside a range of concrete interlocking roof tiles. Its fantastic design makes it virtually hidden within the roofline. The tile vent is suitable for roof pitches of 17.5° and over. ·         Comes in four colours including Terracotta, Brown, and Slate Grey. ·         Suits Marley, Redland, Russell and Sandtoft Double Roman profiles. ·         Works with Adaptor and Flexipipe for 10K Slate Vent and Profile-Line vents. Dimensions: W: 332mm L: 418mm D: 90mm

Klober Mendip Inline Vent

Profile-Line Double Pantile Tile Vents are a neat, cleverly designed in-line range suitable for the most popular concrete interlocking roof tiles, with a minimum pitch of 17.5°. The built-in downpipe provides a direct ventilation path into the roof space, covering an area of 10,000mm2 to help to reduce the build-up of mould growth and structural damage, caused by damp, poorly ventilated roofs. While it can also be used as a terminal for soil and ventilation pipes and mechanical extraction systems too when used with an adaptor and Flexipipe. Profile-Line Double Pantile Tile Vents have been specially developed to suit leading tile manufacturers, including Marley Mendip, Redland Grovebury, Russell Pennine and Sandtoft Double Pantile profiled interlocking tiles. The in-line design makes the vent virtually invisible in the roof line and is available in a wide variety of colours to match the roof tiles.

Klober Modern Inline Vent

Profile-Line Flat Tile Vents are a neat, cleverly designed in-line range suitable for the most popular concrete interlocking roof tiles, with a minimum pitch of 20°. The built-in downpipe provides a direct ventilation path into the roof space, covering an area of 10,000mm2 to help to reduce the build-up of mould growth and structural damage, caused by damp, poorly ventilated roofs. While it can also be used as a terminal for soil and ventilation pipes and mechanical extraction systems too when used with an adaptor and Flexipipe. Profile-Line Flat Tile Vents have been specially developed to suit leading tile manufacturers, including Marley Modern, Redland Mini Stonewold, Russell Grampian and Sandtoft Calderdale profiled interlocking tiles.The in-line design makes the vent virtually invisible in the roof line and is available in a wide variety of colours to match the roof tiles.

Klober Universal Verge Terracotta

Uni-Click Dry Verge is designed to provide a mortar free and secure method of fixing concrete interlocking verge tile. Its neat interlocking design provides a consistent appearance that requires no maintenance. The system is available Brown, Terracotta and Grey to blend in with the roof line and fit most profiles of concrete interlocking tiles.

Klober Universal Verge Grey

Uni-Click Dry Verge is designed to provide a mortar free and secure method of fixing concrete interlocking verge tile. Its neat interlocking design provides a consistent appearance that requires no maintenance. The system is available Brown, Terracotta and Grey to blend in with the roof line and fit most profiles of concrete interlocking tiles.

Klober Uni Verge Brown

Klober Uni-Click Dry Verge is designed to provide a mortar free and secure method of fixing concrete interlocking verge tile. Its neat interlocking design provides a consistent appearance that requires no maintenance. The system is available Brown, Terracotta and Grey to blend in with the roof line and fit most profiles of concrete interlocking tiles.

Beatsons Floor Levelling Compound 708 20Kg

Everbuild 708 Self Levelling Floor Compound is a cement based product used to level out uneven floors and screeds prior to laying ceramic tiles, thermoplastic tiles, lino, wood block flooring or carpet. Mix with either water or EVERBUILD FLOOR FLEX PLUS to give a free flowing self levelling topping. When mixed as directed, the compound provides a free flowing mix that sets in 90 minutes and can be overlaid after only 8 hours at normal temperatures. NOTE: This product is not suitable for use as a final wearing surface. Size: 20kg.

Beatsons Rolled Lead Code 5 6m Lengths

This product is Code 5 Lead. Rolled lead sheet has been awarded BRE Green Guide ratings of A and A+ when manufactured to British Standard BS EN12588. As a material Enviro Lead is 100% recyclable and the advantages of its use are vast when compared to other materials used for the same purpose. Enviro Rolled Lead Sheet and Flashings can be formed around all areas where water ingress is high risk such as chimney base & rooftile abutments, roofing tiles and brickwork of a building. Lead sheet has been in use as a building material for centuries. Lead sheet adorns the roofs of churches, offices, factories, public buildings and homes throughout the United Kingdom because of its ease of use, durability and the pleasing grey colour of its protective patina. Lead sheet is easily shaped, is long lasting and flexible in all weather conditions. Lead sheet is easy to install and will out-perform other building materials, if the rules of good practice are followed. Lead is 100% recyclable time after time.

Beatsons Lead Code 4 6m Lengths

Code 4 lead sheet adorns the roofs of many types of buildings across the United Kingdom because of its ease of use, durability, and the pleasing grey colour of its protective patina. Code 4 lead roll is easily shaped, long-lasting and flexible in all weather conditions, making it perfect for the UK climate. Lead sheet has been in use as a building material for centuries. A 100% recyclable material, lead is still as relevant in today’s sustainable society as it was when first introduced.

Beatsons Code 3 Lead 6m Lengths

Lead Roof flashing provides a long-term watertight roofing option that last three times longer than most man made alternatives. Lead Sheets is produced from 100% recycled lead which leads to a low carbon footprint. Quick and easy installation in most weather conditions Calder 50Year warranty 

Knauf Bonding Compound 25kg (Adhesive Dot Dab)

Knauf Plasterboard Adhesive / Bonding Compound provides a high-quality, robust lining in the shortest possible time frame, speeding up projects. Multi-purpose gypsum-based adhesive for plasterboards and insulating laminates. The system is suitable for most brick, block and concrete backgrounds and will work with a wide range of Knauf Plasterboards or Knauf Insulating Laminates. Quick and economical to install Minimum stand-off distance No need to mechanically fix to the background

Kalsi Plastics 600mm Kalsi Fascia Joint

Upvc roofline products are well suited to replace old timber fascias and soffits, our range includes facsias, soffits, capping board, ventilators, and trims. Ideal for a maintenance free home, no need to paint. Suitable to all types or home & commercial use

Kalsi Plastics 600mm Fascia Corner

Corner Trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. To Enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any pvc fascia installation should be glued to the board and the other side. COMES IN 3 COLOURS 

Kalsi Plastics 300mm Kalsi PVC Fascia Joint

Upvc roofline products are well suited to replace old timber fascias and soffits, our range includes facsias, soffits, capping board, ventilators, and trims. Ideal for a maintenance free home, no need to paint. Suitable to all types or home & commercial use

Kalsi Plastics 300mm Fascia Corner

Corner Trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. To Enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any pvc fascia installation should be glued to the board and the other side. COMES IN 3 COLOURS 

Beatsons 95mm Architrave

Enhance your interior with our 95mm Architrave, designed for a sleek and stylish finish around doors and windows. Crafted for durability and aesthetic appeal, this architrave provides a smooth, professional look that complements both modern and traditional spaces. Key Features: ✅ Premium Quality – Made from PVC-ue ✅ Elegant Finish – Provides a neat and stylish border around doors and frames✅ Easy Installation – Simple to cut and fit for DIY and professional projects✅ Low Maintenance – Resistant to wear, ensuring lasting beauty Available Colours:  

Beatsons 65mm Architrave

65mm Architrave is suitable for window and door trims and comes in three colours, Anthracite, White and Rosewood. These all come in 5m lengths

Beatsons 45mm Architrave

45mm Architrave is suitable for window and door trims and comes in three colours, Anthracite, White and Rosewood. These all come in 5m lengths

Beatsons 9mm Flat Board Anthracite

uPVC roofline products are well suited to replace old timber fascia's and soffits. The 9mm Flat Board is ideal for a maintenance free home.

Beatsons 16mm Fascia Board (Mamouth) Anthracite

If you are looking for a White Replacement Fascia Board, our high-quality product ticks all the boxes. It resists the elements, is ultra-low maintenance and manufactured from robust uPVC. 

Beatsons 9mm Reveal Liner Anthracite

Kalsi Plastics 16mm Fascia Board (Mamouth) White

If you are looking for a White Replacement Fascia Board, our high-quality product ticks all the boxes. It resists the elements, is ultra-low maintenance and manufactured from robust uPVC. 

Beatsons 9mm Reveal Liner Rosewood

Kalsi Plastics 9mm Reveal Liner Capping Board White

A uPVC 9mm Reveal Liner Capping Board is a durable and low-maintenance white PVC product designed primarily for use in construction and home improvement projects, specifically to enhance and protect window and door reveals. Below is a description: Key Features: Material: Made of uPVC (unplasticized polyvinyl chloride), a robust and weather-resistant material. Thickness: 9mm thick, providing a sturdy and lightweight solution. Purpose: Used to cap over existing window or door reveals for a clean and professional finish. Protects underlying surfaces from weathering, damage, and wear. Finish: A smooth, white surface that offers a modern, clean look and complements most window and door frames. Low Maintenance: Resistant to rotting, peeling, and cracking. It can be easily cleaned with soap and water. Weatherproof: Designed to withstand varying weather conditions, including UV exposure. Easy Installation: Lightweight and straightforward to fit with adhesive or screws. Applications: Ideal for use in refurbishment projects where old or damaged reveals need covering. Suitable for residential and commercial properties. Benefits: Improves the appearance of window and door frames. Enhances the longevity of structural reveals by protecting them from moisture and environmental damage. Cost-effective and practical alternative to more labor-intensive options.

Beatsons 9mm Flat Board Rosewood

uPVC roofline products are well suited to replace old timber fascia's and soffits. The 9mm Flat Board is ideal for a maintenance free home.   ALL PRODUCTS ARE 5M LENGTHS.

Kalsi Plastics 9mm Flat Board white

uPVC roofline products are well suited to replace old timber fascia's and soffits. The 9mm Flat Board is ideal for a maintenance free home.   ALL PRODUCTS ARE 5M LENGTHS.

Beatsons 300mm x 150mm Concrete Step

High Grade strength concrete step. Steps cast using 30N concrete in steel mould, with all exposed surfaces finished smooth. Available in various lengths. What is “granolithic concrete” Granolithic concrete (often just “grano”) is a fine-grade concrete / mortar composed of cement, sand, and a hard, fine aggregate (commonly granite or limestone) rather than the coarse gravel used in regular concrete. Because of this mix, granolithic concrete produces a dense, hard-wearing, abrasion-resistant surface — more durable than typical sand/cement screeds or ordinary concrete in terms of resisting wear, impact and heavy traffic.  The finish can be very smooth (trowelled, floated) or textured (for slip resistance), depending on application and finishing method.   Because of these properties, granolithic concrete is commonly used for floors, pavements, industrial sites, and—importantly—external steps or areas subject to heavy wear.

Birtley TF50 Timber Frame 50mm Cavity Wall Lintel - 100mm

TIMBER FRAME 50MM CAVITY WALL LINTEL – 100MM Pinch batten must be used. Other cavity sizes available. Features   We are the only lintel manufacturer to hot-dip galvanize after fabrication providing up to 50% more zinc protection than other approved coatings Supergalv coating offers a superior life expectancy Post-fabrication galvanizing leaves no surface with inferior paint protection  

Beatsons Type K9 Prestressed Concrete Lintel

The Type K9 Prestressed Concrete Lintel is a heavy-duty structural lintel designed to provide reliable support over door and window openings in masonry construction. Manufactured from high-strength concrete with integrated prestressed steel reinforcement, it delivers excellent load-bearing performance while maintaining a slim, practical profile.   Engineered to reduce deflection under load, the K9 lintel offers enhanced strength compared to standard reinforced concrete lintels, making it suitable for domestic, commercial, and light industrial applications. It is ideal for supporting block, brick, or stonework above structural openings.

Beatsons Type U2 Prestressed Concrete Lintel

The Type U2 Prestressed Concrete Lintel is a high-strength structural lintel designed to provide reliable load support over door and window openings in masonry construction. Manufactured using quality concrete and high-tensile prestressed steel reinforcement, it delivers superior strength, durability, and long-term performance. Suitable for use in brick, block, and cavity wall applications, the U2 lintel is engineered to safely distribute masonry loads while minimising deflection and cracking. Its robust construction makes it ideal for domestic, commercial, and light industrial projects.

Beatsons Type A Prestressed Concrete Lintel

The Type A Prestressed Concrete Lintel is a high-strength structural support designed to carry masonry loads above door and window openings. Manufactured using high-tensile steel strands that are tensioned before casting, this prestressed design delivers superior load-bearing capacity while maintaining a slim, efficient profile. Ideal for domestic and light commercial construction, Type A lintels are suitable for supporting brick, block, and cavity wall construction where standard duty loading is required.

Beatsons V36 Debonding Sleeves 100mm

Debonding sleeve to allow for movement of the ties listed above (a 25mm wide sleeve is required for channel ties). Debonding sleeves should have a 10mm gap left at end to allow for movement once installed.  

SPE SS Movement Tie 200mm

Used over a movement joint in a run of brickwork or blockwork with safety embedment detail or plain end (B20). (Sleeve supplied as extra). ** SLEEVE NOT INCLUDED**

Beatsons VE7 Galv Frame Cramp Ties 200mm

Frame cramp, for restraining masonry to new or existing structures and for building in non-structural elements (frames etc).

Beatsons Green Vapour Barrier 125Mu 4x50m

The purpose of this vapour barrier is to improve airtightness within a building or structure and remove any condensation that might form. It is most commonly used to limit the path of damp, warm air which could otherwise permeate into the roof of a building.

Beatsons Polythene 300Mu/1200g 4x25m Black

300MU Damp Proof Membrane is a low density, blown film of extruded polythene. It is intended for the use with concrete flooring. DPM sheeting can be used as an over-site membrane, being used between a blinded hardcore bed and the base concrete, or as a sandwich membrane between the base and concrete screed or just in base concrete. Black Agrément Certificate  Accredited by the Board of Agrément (BBA: 94/3009) Manufactured using over 90% recycled materials 4m width x 25m length DPM roll coverage: 100m²

Beatsons Polythene Tps 4.5Kg 4 x 25m H/D

Our general-purpose sheeting is produced from recycled material and is manufactured within strict tolerances under ISO 9001, this ensures a high-quality product. A temporary, fully waterproof protection sheet Designed to protect floors and equipment during work Recommended interior use only

Beatsons Damp Proof Course (DPC) 30mtr

DPC provides damp proof protection, preventing the ingress of external moisture. This product is suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications

Beatsons V55 Hand Nail Plate

A nail plate system for manual use which enables the construction of timber structures on site to strengthen joints for non-structural applications. Automated production ensures uniform hole positions.

Beatsons Light Duty Angle Bracket

A multi-purpose fixing angle plate for general site applications, ie for connecting timber joists to timber purlins.

Beatsons Heavy Duty Angle Bracket

A versatile range of brackets for use in 90 degree connections allowing for use of nails, screws and / or bolts and coach screws. Angle Brackets have a reinforced rib.

Beatsons L/D Strap Twist 100

Twisted Light Duty restraint straps are great for any vertical applications, such as attaching wall plates to masonry. These are available in 600mm,900mm and 1200mm. Light duty restraint straps can be used for vertical restraint applications, such as holding down wall plates to masonry. These multi-holed straps are supplied in 100mm increments with 6mm holes at 25mm offset centres. Available straight, bent or twisted or in combinations as required in galvanised or stainless steel.

Beatsons L/D Strap Bend 100

Bent Light Duty restraint straps are great for any vertical applications, such as attaching wall plates to masonry These are available in 600mm,900mm and 1200mm   Light duty restraint straps can be used for vertical restraint applications, such as holding down wall plates to masonry. These multi-holed straps are supplied in 100mm increments with 6mm holes at 25mm offset centres. Available straight, bent or twisted or in combinations as required in galvanised or stainless steel.

Beatsons Light Duty Strap Straight

Light duty restraint straps can be used for vertical restraint applications, such as holding down wall plates to masonry. These multi-holed straps are supplied in 100mm increments with 6mm holes at 25mm offset centres. Available straight, bent or twisted or in combinations as required in galvanised or stainless steel.

Beatsons Masonry Joist Hanger 150 x 50mm

standard hanger is designed for building into brickwork or blockwork.

Beatsons Galv Ext Render Stop/Bellcast Bead 3.0m

Plaster and render bead. Used where a neat drip or ‘bell-end’ lower edge is needed on external render. Fixed by mortar dabs or masonry nails. Although this is for external use we would generally recommend Stainless Steel or PVC-u for this application only using this product in sheltered or low rainfall areas.

Beatsons Galv Plaster Stop Bead 10mm x 3.0m & 13mm x 3.0m

Drylining bead. A bead for protection of thin coat plaster at edges and reveals and for abutment of thin coat plaster against other wall finishes. Also sometimes used as an arch bead. Nail holes for easy fix with drywall nails. Rigid but light bead perforated for an excellent thin coat plaster key. Either 3mm or 6mm Stop. Internal use only.

Beatsons Galv Mini Mesh Bead 3.0m

External bead. Used where a neat drip or ‘bell-end’ lower edge is needed on external render. Fixed by mortar dabs or stainless steel nails.

Beatsons Galv Perforated Thin Coat Bead 3.0m

Drylining Bead.  A thin coat board bead for plaster skimming on plasterboard lined walls. Plaster depth 2/3mm. Nail holes for easy fix with drywall nails. Scalloped edge for an excellent plaster key. Internal use only.

Beatsons Galvanised Angle Bead

Plaster and render bead.  This traditional wet plaster bead provides a strong true corner or arris, with the mesh wings allowing for a good plaster key and resistance to cracking. Fixed by plaster dabs at approximately 600mm centres, push the wings into the dabs to allow for the required plaster depth, up to 13mm, then ensure the nose is set square and plumb as required. Generally for internal use only.

Beatsons Galvanised Fixing Band 20mm x 10mtr

Perforated galvanised band Provides a quick and reliable fixing method Can be cut or bent easily

Beatsons Galv Brick Reinforcement 65mm x 20mtr & 115mm x 20mtr

An expanded metal mesh designed to be incorporated into masonry for crack control. Durability- Excellent corrosion resistance and a service life of not less than 60 years

Beatsons Truss Clip 38mm & 50mm

Attaches trusses and rafters to wall plates to provide wind restraint. Avoids skew nailing damage and provides positive resistance to wind forces. Safe working load 2.38kN uplift.

Beatsons Joist Hanger 50mm & 100mm

Standard Timber to Timber Hangers. A quick and safe method of joist trimming for light, medium and heavy applications such as supporting floor joists, trimming stair wells, and underslung joists. They have increased hole centres to spread load over greater area.

VE4 Housing Tie (200 & 225mm) (Box of 250)

light duty wall tie used in domestic dwellings. Suitable for buildings with a maximum height of 10m and cavity widths from 50-150mm (Type 4 wall tie). BBA Approved Material - Manufactured from grade 304 stainless steel Compliance- Tested as Type A (sound) and as Type 4(strength) to BS EN 845-1 Sizes 200 & 225mm 

V61 Timber Kit Ties (50mm Cavity) ( box of 250)

Stainless Steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height of 15m and cavity widths from 50-100mm. Design- Masonry-timber tie for timber frame buildings that accommodates vertical movements. Material - Manufactured from grade 304 stainless steel Behaviour in relation to fire - Non combustible ( as defined in the national building regulations) Compliance - Tested as Type B (sound) and as Type 6 (strength) to BS EN 845-1

Beatsons Universal Wall Starter C25S 2.3m

The Vista Stainless Steel Wall Starter System joins new walls to existing masonry. Suitable for both internal and external brick or block walls from 60 to 250mm thick, the connectors can be slotted together up to a maximum of 8 metres or 3 storeys high. Stainless Steel Easy connection of new masonry walls 60mm to 250mm wide to existing masonry Pack includes all fixings for a single ski of masonry up to 2400mm high and comes with full instructions. SOLD separate or in a box of 20 (trade pack)

Keylite Loft Ladders

Keylite, with its commitment to thermal insulation, airtightness and compliance with industry standards, works with installers aiming to create loft spaces that not only meet current demands but also withstand the test of time.  Keylite Loft Ladder features: Pre-installed "Flick-Fit" brackets that allow simple, fast, one-person installation. Pre-fitted handrail as standard. Dovetail joints on all ladder treads for strength and durability. Protective feet to help prevent scratching floors. Continuous seal around the trapdoor to reduced heat loss. Pull down rod included. Slip resistant treads. 3 year guarantee. Certified BS EN 14975 Loft Ladders.  

Everbuild Sealant Strip Out Tool

The Strip-Out Tool is a unique patented tool which works on any type of sealant and is the ideal partner for use before applying Forever White silicone sealant. The Strip-Out Tool is incredibly simple and its design and shape provides a really quick way to strip all types of sealant out of any 90° angle joint.

Beatsons Dowsil DC785+ Sanitary Silicone Sealant 310ml

Dowsil 785+ is a one-part, silicone sealant specifically designed for the sealing of sanitary fittings, including baths, showers, sinks, urinals and ceramic tile joints. It protects against salmonella, E.coli and MRSA. Contains a fungicide to resist mould growth A fire rating of up to 2 hours can be achieved Joint movement capability +/-20% Conforms to ISO 11600-F-20LM

Everbuild Dual Purpose Foam Cleaner

Everbuild Dual Purpose Foam Cleaner is a specialised aerosol cleaning product designed for use with uncured polyurethane (PU) foams. It contains a powerful solvent that dissolves and removes wet (uncured) foam from foam guns, nozzles, and most common building substrates. The product is particularly useful after applying expanding foam to clean tools and clear accidental foam spills before the foam hardens. Key Features   Dual-purpose design: Can be used both through a foam gun applicator for internal cleaning and as a regular spray using the included nozzle for external cleaning. Solvent-based aerosol: Formulated to dissolve uncured PU foam quickly and efficiently. Separate spray nozzle: Included for versatile use without an applicator. Extends tool life: Helps keep foam guns and nozzles clean so they can be reused many times.

Everbuild Fire Foam B2 Handheld

Firefoam B2 Handheld is a quick setting fire rated, one part polyurethane foam in a ready to use hand held canister. Fire resistant for up to 2 hours in certain joint configurations. It expands on application to up to 50 times the can contents and meets the requirements of the test criteria for BS 476 Part 20.

Everbuild Fire Foam B2 Gun Grade 750ml

Firefoam B2 Gungrade is a quick setting fire rated, one-part polyurethane foam designed for application by any standard foam applicator gun.   High degree of fire rating: slows down the passage of flames and smoke in comparison to standard B3 grades Fire resistant for up to 2 hours in certain joint configurations Quick setting – can be cut, sawn or plastered in 1 hour Expands up to 50 times original can volume Possesses insulating and sound deadening properties Meets the requirements of the test criteria for BS476 Part 20 When used as part of a fire-rated joint, use in conjunction with Everbuild Firemate intumescent sealant for maximum fire rating

Everbuild Opti-Mix Mortar Plasticiser

Everbuild Opti-Mix Mortar Plasticiser is a highly concentrated, air-entraining liquid plasticising admixture designed to improve the properties and performance of mortar mixes. It comes in a self-gauging 1 L bottle. Key Features Highly concentrated formula – 1 L of Opti-Mix is equivalent in performance to approximately 25 L of conventional mortar plasticiser, reducing waste and storage needs. Air-entraining action – forms stable microscopic air bubbles within the mortar mix to improve workability. Application Notes   Typical dosage is 5–10 ml per 50 kg of cement. Add the product to the gauging water before mixing with dry materials — do not mix directly into the dry components.

Ronseal Exterior Multi Purpose Smooth Finish Filler - 1.2kg

Ideal for fixing holes and gaps in masonry, concrete and brick. It’s water and frost resistant and can be applied on days when the weather isn’t quite perfect. It’s tough, durable and you can drill into it once it’s dry. Repair your exterior walls Fills gaps up to 20mm deep Dry in one to two hours Available in tubs or tubes Water resistant Stands up to the elements Designed to be used in damp and moisture-prone conditions

Ronseal 5 Minute Multi Purpose Smooth Finish Filler - 600ml

Fill cracks and holes up to 70mm with this super-fast drying filler. Its special formula makes it lightweight so it won’t sag, making it perfect for fixing holes and cracks in ceilings. Perfect for big and last-minute repairs Touch dry in five minutes and ready to paint over in 15 minutes Suitable for plaster, stone, concrete and wood Leaves a smooth finish and fills deep  

Ronseal Big Hole Smooth Finish Filler - 1.2ltr

Fill big holes up to 50mm deep in one go with our Big Hole Smooth Finish Filler. It won’t sag so it’s perfect for ceilings and it can be drilled and nailed too. Super smooth finish with no need for sanding Dries in one to two hours Ronseal applicator included Suitable for plaster, stone, concrete and wood Fills deeper than most standard fillers

Ronseal Multi Purpose Smooth Finish Filler

Fill holes up to 20mm and leave a tough repair that won’t shrink or crack. Our Multi Purpose Smooth Finish Filler comes pre-mixed so it’s easy for you to apply and it’s easy to sand too. A fine finish and strong repair Dry in just two hours Fills up to 20mm Suitable for indoor plaster, stone, concrete and wood High performance formula ensures the filler offers excellent adhesion

Beatsons Sika 1 Waterproofer 5LTR

Sika®-1 Waterproofer is an aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied sand/cement renders, screeds and mortar to provide an effective barrier against the transmission of liquid water. Used: for structural screeds to resist water pressure below ground when used in conjunction with Sika®-1 pre-batched mortars; waterproof renders to resist moisture above ground; internal below ground basement waterproofing; general waterproofing admixture for mortar.

Ronseal Thompsons Waterseal

Thompson's Water Seal uses a unique micro silicone emulsion to stop water penetration. Apply Water Seal directly onto damp surfaces to provide long lasting waterproof protection within hours. -         Apply directly to damp surfaces -         Stops freeze thaw damage       -     Use on brick, concrete and stone

Everbuild Accelerator & Frostproofer 203 5ltr

Everbuild 203 Accelerator & Frostproofer is a chloride-free liquid admixture designed for use in cement-based mixes to speed up setting and hardening and to protect fresh mortar/concrete from frost damage during cold weather. Key Features   Accelerates setting and hardening times of mortar, concrete, screeds and renders — useful in cold conditions or when rapid set is needed. Frost protection: helps prevent freeze-thaw damage to fresh mixes in temperatures down to around -8 °C. Chloride-free, non-corrosive formula, making it safer with embedded metal (e.g., brick ties). Conforms to EN 934-2 Table 7 (standard for concrete admixtures)

Everbuild Fungicidal wash 404 5LTR

EVERBUILD® 404 Fungicidal Wash is a powerful, fast[1]acting solution which is effective on most surfaces. It quickly removes fungus and lichen from floors, walls, drives and roofs. It also leaves a residual surface to help prevent further infestation

Everbuild Brick & Patio Cleaner 5LTR

Everbuild Opti-Mix Mortar Plasticiser is a highly concentrated air-entraining liquid plasticising admixture designed to improve the performance and workability of mortar mixes. It’s much stronger than standard plasticisers — 1 litre effectively replaces about 25 litres of conventional mortar plasticiser. Key Features Superior Plasticising Action: Forms very stable micro air bubbles in the mortar, improving the consistency and workability — often described as giving a “buttery” consistency that’s easier to apply and finish. Improved Durability: Helps reduce shrinkage, cracking and curling as mortar cures, and gives enhanced resistance to mild frost and freeze-thaw cycles. Reduces Efflorescence: By replacing lime in the mix, it can help lower the chance of salt deposits (efflorescence) forming on the surface. Highly Concentrated: A small dosage — typically 5–10 ml per 50 kg cement — is enough to improve mortar properties significantly. Easy to Use: Supplied in a self-gauging bottle for controlled dosing.

Everbuild One Strike Filler 1ltr

One Strike is a revolutionary filler formulated using lightweight polymer bubbles that fills holes and cracks, even deep holes, in just one quick application. There is no need for secondary filling to level off as the filler will not shrink, sag or crack.  Easy to apply No sanding required – finishes to a smooth surface Quick drying – ready to paint/paper in approx. 30 minutes Fills up to 75mm deep in one application No sagging or shrinkage Overpaintable with most solvent based and emulsion paints Overstainable Suitable for internal and external use Dries brilliant white

Azpects EASYGrout slurry 15kg

EASYGrout is a high-quality slurry grout for use on porcelain. EASYGrout mixes readily with water to give a highly flowable joint filling and grouting mortar ideal for use on porcelain floor surfaces where a high early strength, resilient, compact grout joint is needed, particularly in areas subject to early and sustained trafficking. It is available in three colours and is suitable for grouting joints internally and externally around porcelain tiling and paving slabs, filling joints from 5mm up to 25mm wide with a minimum joint depth of 20mm. Available in 15kg tubs packed in 3 x 5kg bags for more economic mixing - less waste.

AZPECTS EASYprime

EASYPrime is a polymer modified cementitious slurry primer. EASYPrime is an easy to apply high strength bonding agent for use when laying natural stone and porcelain paving. EASYPrime ensures full and permanent contact is achieved with the aggregated mortar in the bedding layer. EASYPrime is suitable for application in domestic, commercial, and public areas.  Coverage depends on the coated film depth and the porosity and texture of the rigid bound sub-base. As a guide a single 5kg sachet of EASYPrime will cover a minimum of approximately 8.0 sq.mtr.

Beatsons Hanson Fast Set Postcrete 20Kg

Hanson Fast Set Postfix is simple to use (just add water) and fast-setting concrete for fixing posts into the ground. Sets in under 3 minutes – ideal for jobs where speed is essential. Suitable for tradesmen, DIYers and local authorities. One bag makes enough for one post. Easy to use (just add water).  How Much water for a 20kg bag of postcrete? To mix a 20kg bag of Postcrete, you usually need to add around 2.5 to 3 liters of water. However, always refer to the instructions on the bag, as water requirements can vary depending on environmental conditions and the desired consistency of the mix. Features & benefits Conforms to BS EN 9001 Weatherproof plastic packaging – suitable for outdoor storage. Easy to use – just add water 2.5 to 3 Liters One bag = one post Aggregate mix for increased initial support of post

Eliza Tinsley Galvanised Round Wire Nails - 5kg Box

Eliza Tinsley Galvanised Presser Point Staples - 10kg

Eliza Tinsley Galvanised Presser Point Staples - 5kg

Eliza Tinsley Galvanised Clout Nails - 25kg

Eliza Tinsley Galvanised Round Wire Nails - 25kg

Eliza Tinsley Galvanised Round Wire Nails - 10kg

These Galvanised Round Wire Nails are a versatile and durable fixing solution, ideal for a wide range of construction and DIY applications. Manufactured from high-quality steel and hot-dip galvanised for enhanced corrosion resistance, they offer long-lasting performance in both indoor and outdoor use. Their smooth shank and large flat head provide excellent holding power, making them suitable for timber framing, fencing, pallet work, and general carpentry. Key Features: Supplied in a 10kg trade pack Galvanised coating for superior rust resistance Strong and reliable for structural and general-purpose use Ideal for soft and hardwood applications Consistent size and quality for ease of use   Perfect for professional tradespeople and DIYers alike, these nails deliver strength, durability, and peace of mind on every project.

Eliza Tinsley Bright Steel Round Wire Nails - 4kg

Everbuild Cement Dye

Powder Mortar Tone is formulated from best quality oxide pigments for permanently colouring all types of mortars, rendering, concrete and pointing.   The pigments disperse easily into the mix to give a uniform shade for each mix batch. Shading can be adjusted to provide a wider variety of colour depths.   Permanently colours cement based products - light fast pigments will not fade. Improves workability/trowelability - contains a plasticizer. Chloride free (chloride ion content < 0.1%). Reduces bleeding/segregation. Inhibits efflorescence.

Recticel PIR Insulation Board

Recticel Eurothane® GP PIR insulation board is a lightweight, high-performance rigid foam board for pitched roofs, framed and internal walls, floors and ceilings. Each 2400 x 1200mm board is faced on both sides with a gas diffusion-tight multilayer foil and delivers a thermal conductivity of just 0.022 W/mK, so you can hit strict U-value targets with a thinner build-up than mineral wool or EPS. Straight edges allow tight, easy butt joints, and the board is quick to cut, handle and install on site. Rated Euroclass F to EN 13501-1 and BBA certified (25 to 160mm), it's a trusted alternative to Celotex and Kingspan PIR boards. Stocked in 25, 50, 70, 90, 100, 140 and 150mm thicknesses. In stock now for click & collect.

Azpects EasyJoint 12.5kg Paving & Jointing compound

Read our Azpects blog to see how to apply this product. EASYJoint is the original sweep-in jointing Compound and still the best truly "All Weather Paving Joint Compound" available and made in the UK. Do not be fooled by others making similar claims. Azpects sell tens of thousands of tubs of EASYJoint every month to satisfied customers all over the UK and to parts of Europe. -    EASYJoint grout or jointing compound is a very quick, effective, and aesthetically pleasing way to fill joints between paving, be it natural stone or concrete flags. It is suitable for all types of paving material provided there is a gap of at least 3mm wide and 25mm deep (narrow joint compound). As the name implies,  -     EASYJoint is easy to use – simply soak the paving with water before commencing and then simultaneously sweep and wash the jointing compound into the joints, letting the water take the strain. Full instructions on how to joint paving and a demonstration video showing how to joint a patio can be found on this web site. If you cannot find what you are looking for on the Azpects site and need help on how to joint a patio or need any assistance with choosing the right hard landscaping product or how to use an EASY Range product, call our dedicated hard landscaping helpline where our trained staff will assist you.

Azpects EASYCare Porcelain Cleaner & Sanitiser 750ml

Overview A high performance cleaner for all types of porcelain tiles, pavers, marble, granite and terracotta. This powerful & effect water based cleaner is a non-acidic & non caustic soda formula which is fast acting and safe to use leaving a pleasant cherry odour. Results can be seen quickly without leaving any water marks.  

Azpects EASYCare Algae Remover 1L Concentrate

For further information and how to apply, please read our Azpects Blog. Overview The EASY solution to remove Algae, Mould and light infestations of Lichen. EASY Algae Remover is a professional strength product but suitable for DIY use. The easy to use formula can be used on paths, patios, decking, walls, fences, roofs, garden furniture, statues and memorials. Our 1L concentrate bottle makes upto 50 litres of product, cleaning up to 250sq metres - meaning less packaging, less space and better performance. For those wanting to cover a smaller area we have a handy sized ready-to-use trigger spray. All this adds up to better choice & value. Our Algae remover does not contain solvents, acids or caustic soda and is used by professionals, landscapers and gardeners alike. Like its sister product EASYCare Patio & Deck Cleaner, the active ingredients will continue working for up to 12 months after application. In fact, 2 or 3 weeks after initial use, your surface is cleaner than when it was first applied. For more stubborn areas of Lichen, please click here to see EASY Black Spot Remover, it kills the lichen spores and enables the Black Spot to be pressure washed away.

Azpects EASYSeal Porcelain Sealer 3L

Overview EASYSeal Porcelain Sealer delivers long-lasting protection and helps to keep porcelain paving and tiles looking their best. Its professional grade formula produces an invisible layer which repels water, oil, grease and grime, whilst resisting the growth of algae and moss. EASYSeal Porcelain Sealer can be applied to any unglazed porcelain paving or tiles used on floors, walls, paths or patios. Simply ensure the area is clean, apply with a paint pad or brush, and allow to dry. The sealant is ready-to-use, with 3 litres protecting up to 36 square metres. Protects pavers, tiles, joints and grout Long-lasting protection with no film or visible layer Repels water, oil, grease and grime Restricts moss growth, algae and other natural contaminates Suitable for internal and external use Water based and easy to apply

Azpects EASYCare Mortar Stain and Calcium Remover 1L Concentrate

Overview The EASY way to remove cement residue and much more! EASY Mortar Stain and Calcium Remover is a fast acting powerful ECOLOGICAL cleaner to remove cement residue deposits, scale, oxidisation & atmospheric contamination. Unlike any other acid/alkaline cleaners, it does not require neutralising after application. Unlike most alternatives, this concentrated version has the benefits of the user determining the strengths of the application. 1 bottle will clean up to 60 sqm.

Azpects EASYSeal Slate & Limestone 5L

Overview Seals, enhances and enriches colour. EASYSeal Slate & Limestone is an advanced water based high performance sealer using the latest technology to provide a waterproof, breathable, transparent yet durable seal to limestone and slate. Solvent free and easy to use, EASYSeal Slate & Limestone helps to repel dirt and stains and inhibits the growth of moss and algae. For use only on slate or limestone. To enhance other porous natural stone types, use EASYSeal Sandstone Sealer & Enhancer. Resists fungal growth and staining. Improves slip resistance by keeping contaminates away. Protects and waterproofs. Transparent sheen finish. Quick drying. Note: The nature of natural paving is such that stone, even of the same type, will absorb liquid at different rates. This varying of density even extends to patches within the same paving slab resulting in differing levels of enhancement. To achieve as even an effect as possible, we recommend two generous coats. The final result will simply be an exaggeration of the stone colours in their natural state.

Azpects EASYSeal Sandstone Sealer & Enhancer 5L

For further information and how to apply, please read our Azpects Blog. Overview Put life into your patios, paths and driveways A simple to use PROFESSIONAL GRADE water based, non-solvent, solution which enriches, boosts and enhances the natural colour of your Sandstone paving without giving it a false shiny finish. Whilst Sandstone Sealer and Enhancer has been design specifically for sandstone it is suitable for sealing and enhancing other types of natural stone. When looking to seal and enhancer slate or limestone we suggest you use our EASYSeal Slate and Limestone which has been designed for less porous stone. The clever formulation is designed to give a constant, vibrant appearance all across the paving. As a bonus, EASYSeal Sandstone Sealer Enhancer also provides a good level of protection for the paving. We've improved our Colour Enhancer from a 1 litre concentrate to a new ‘ready to use’ 5 litre formula. It’s designed for Sandstone but also suitable for most types of natural stone. The replacement product for Colour enhancer and it suitable for most types of natural stone NoteNatural stone varies in levels of porosity, therefore on more porous stone or uneven surfaces the coverage will be less and more product will be required. For less porous stone, such as slate and limestone use our EASYSeal Slate and Limestone sealer and enhancer. EASYSeal Sandstone Sealer & Enhancer is for more porous natural stone.

Azpects EASYSEAL Contract 5L

For further information and videos, please read our Azpects Blog. Overview A solvent free sealer and protector producing a low sheen finish in a single application EASYSeal CONTRACT has been specifically designed with the professional contractor in mind. It seals and protects all types of concrete including Block paving, Raw concrete, Paving slabs, Pattern Imprinted Concrete (PIC) and Garage floors. It penetrates deep into the substrate and delivers excellent oil and water repellent qualities, ensuring the surface is protected from a variety of staining substances. The hard wearing finish enhances the surface colour and extends the life of the substrate. Application is easy - simply apply to the surface with a roller. Applying additional coats increases the protection level and applies a greater sheen to the surface.

Azpects EASYCare Black Spot Remover 5L

The EASY solution to remove stubborn areas of Lichen and Algae from paving and driveways. Infestations of Lichen, otherwise known as Black or White spot is one of the most difficult challenges in the landscape industry. This high performance treatment is formulated and proven to remove this unsightly and stubborn problem which regular paving cleaners and pressure washing cannot deal with. EASY Black Spot Remover kills these spores and makes removal easy with a pressure washer. As a by-product you'll find that your paving area will be cleaned, revived and invigorated. Available in 5L and 3L ready-to-use bottles Licensed by HSE

OB1 MULTI SURFACE CLEANER

OB1 Multi Surface Cleaner is the most advanced solvent degreaser that leaves no residue, is safe to use on painted surfaces, vinyl, glass and most plastics. Key Description Points   Advanced cleaning performance: Fast‑acting solvent degreaser that evaporates quickly and leaves no residue. Safe on many surfaces: Suitable for painted surfaces, vinyl, glass, most plastics and rubbers. Effective removal: Dissolves and removes adhesive residues, silicone, wax, grease, tar, stickers, duct tape residue and more.  Surface preparation: Ideal for prepping surfaces before applying sealants, adhesives or paint. Other uses: Cleans tools and workshop equipment safely, and degreases mechanical parts (e.g., motors, brakes, suspension) without attacking plastics.  

OB1 GRIP & GRAB ADHESIVE

OB1 Grip & Grab Adhesive is a unique solvent free construction adhesive with an exceptionally high initial grab followed by an incredible structural bond. It can be applied to Concrete, Most Stones, Ceramic, Marble, Wood, Gypsum Board, Metals, Lead, Glass, Mirror, Plastics (Excluding Polypropylene) and any combination of the above without any additional fixings.

OB1 Sealant and Adhesive 290ml

A hybrid polymer sealant and adhesive designed for multi‑surface bonding and sealing. It replaces traditional mastics, wood/PU adhesives, silicone, acrylic and rubber sealants in one product. The solvent‑free, odourless formulation will not crack or shrink, even when applied on wet surfaces or underwater. It bonds and seals materials such as metals (including lead), plastics (PVC & GRP), wood, glass, mirror, concrete and more. It’s suitable for interior and exterior use, with high resistance to fungal and bacterial growth and remains flexible once cured  

Azpects EASYCare Hardscape Masonry Cleaner 5L

Cleans all Porous Stone & Concrete An Excellent rejuvenator for heavily soiled paving, brickwork and masonry. A high performance non-solvent, non-acid cleaner, which completely removes natural soiling from all porous building materials. Will not damage natural/sensitive stone. Results can be seen quickly with improvements continuing for 24 hours. Generally revitalises all concrete and stone. Particularly effective on walls, floors, paths, fountains, monuments, block paving, all other natural stone and concrete. Can also be used to clean decking, fences and other timber structures. EASY Masonry Cleaner provides ideal high performance cleaning. For lasting results we recommend the use of the appropriate sealer from the EASYSeal range. Fantastic on garden ornaments, monuments and headstones. Can also be used on fences and decking. Contains no acids or solvents -will not damage natural/sensitive stone.

Azpects EASYCare Grease & Oil Away+ 500ml

The EASY solution to remove unsightly oil and grease stains from drives, patios and decking. EASY Grease & Oil Away is a simple to use, professional grade cleaner to remove engine oil, grease & oily stains from drives, patios and decking. It contains deep penetrating active ingredients to ensure penetration below the dirt and stains, making removal easy. Used straight from the bottle, it can be applied on concrete and natural stone and will not damage sensitive materials such as Marble, Limestone, Sandstone and Granite. It can also be used to clean grease from barbecues and other items effected by oil, grease or fat deposits. Once you are happy that your driveway, patio or decking is free from oil or grease, then perhaps consider protecting it from future staining by sealing it with an appropriate sealer from the EASYSeal Range.

Azpects EASYCare EASY4Rust 500ml

EASY 4Rust - A Non-acid rust remover, highly concentrated and efficient at removing rust and oxidisation from natural stone. EASY 4Rust is designed to remove rust stains from delicate surfaces, when other rust removers cannot be used due to their corrosive nature. Efficient at removing rust and oxidisation from all natural stone including marble, granite and slate (Slate bleeding). Also wood, paint, fiberglass and concrete.   Quickly lift away rust spots and oxidation Acid-free formula converts rust into a solution to simply wash away Does not alter colour or look of surface Safe to use on stone, concrete or wood Ready-to-use 500ml cleans up to 3m2

Azpects EASYCare Grout Residue Cleaner 1L Concentrate

EASY Grout Residue Cleaner can be used on glazed and unglazed ceramic tiles, including any acid resistant surface. Mild acid replacements and surfactants simultaneously work together to dissolve and emulsify hard to remove grout and mortar residues leaving the surface bright and film free. Super Concentrate Suitable for interior and exterior use No fumes Easy to use Pleasant fragrance

Azpects EASYCare Porcelain Cleaner & Sanitiser 1L Concentrate

A high performance cleaner for all types of porcelain tiles, pavers, marble, granite and terracotta. This powerful & effect water based cleaner is a non-acidic & non caustic soda formula which is fast acting and safe to use leaving a pleasant cherry odour. Results can be seen quickly without leaving any water marks. Our 1L concentrate bottle makes up to 50 litres of product, cleaning up to 300sq metres - meaning less packaging, less space and better performance. For those wanting to cover a smaller area we have a handy sized ready-to-use trigger spray. All this adds up to better choice & value.

Azpects EASYCare Patio & Deck Cleaner 1L Concentrate

Used by Professionals, EASY Patio & Deck Cleaner is a professional grade concentrate that is a fast & effective way of removing heavy build-up of the most stubborn dirt and grime from paving, driveways and decking. But its uses do not end there – it will also effectively clean fences, sheds and other concrete, stone and wood items, such as ornaments and garden structures. Our 1L concentrate bottle makes up to 25 litres of product, cleaning up to 140sq metres - meaning less packaging, less space and better performance. It can be used as a stand-alone product, simply applying it to the dirty surface as per the instructions or it can be used as an additive cleaner for use with a pressure washer. Like its sister product, EASY Algae Remover, it continues to work for months after application - the surface looks better a few weeks after it has been used than when it was first applied!

Eliza Tinsley Bright Steel Round Wire Nails - 10kg

Eliza Tinsley Galvanised Presser Point Staples - 20kg

Blue Circle Mastercrete Cement

Blue Circle General Purpose Cement (Paper Bag) offers consistent, quality results for a wide range of standard building applications including concrete, mortar, rendering and screeds. Suitable for use on all projects from small DIY jobs to major construction. Blue Circle Mastercrete (Plastic Bag) 25KG is an enhanced Portland-limestone cement, for general purpose work, with improved resistance to freeze/thaw attack, lower water demand than ordinary Portland cement and offers a more cohesive mix.   Based on sustainable cement technology   Grey in colour   Consistent strength meeting all the conformity criteria in BS EN 197-   Compatible with admixtures such as air-entraining agents and workability aids   Trial mixes are recommended to determine the optimum mix proportions.

Beatsons Multitrack 1000 Non Woven Fabric (White Roll) - 4.5x100mtr

Multitrack 1000 Non Woven Fabric (White Roll) - 4.5x100mtr has a number of applications including; Separating/strengthening layer under access roads & areas of hard-standing Filter surround for trench drains Separation to stop the intermixing of dissimilar soil layers Filtration, allowing the flow of water whilst preventing the passage of soil  

Beatsons Fastrack Black Woven Fabric 4.5x100mtr

Fastrack Black Woven Fabric 4.5x100mtr is used for a number of applications including; Separating: Access roads & areas of hard-standing Separating / Reinforcing: Layers under new roads, car parks & industrial areas Filter layer under artificial sports surfaces Erosion Control: Coastal defences

Beatsons Bulk Bag (Empty)

Beatsons Bulk Bag (Empty) are now available online at Beatsons Direct. 

Beatsons Rubble Sack

Beatsons Hanson Ready Mix 40N Concrete 20kg

Hanson 20kg Readymix Concrete 40N Mix is a pre-mixed, high-strength concrete blend supplied in a 20 kg bag, designed to deliver reliable concrete right on site with minimal fuss — simply add water and mix to use. Key Features   High compressive strength (40 N/mm²): Provides a stronger finish than standard mixes, suitable for structural and heavy-duty tasks once cured. Pre-batched mix: Cement, sand and coarse aggregates are pre-blended in the correct proportions — just add clean water. Easy to use: No need for on-site mixing of separate materials — ideal for DIY or trade jobs. Versatile applications: Suitable for footings, foundations, steps, paths, manholes, repairs and other general concrete work. Coverage: One 20 kg bag mixed with around ~2 L of water produces ~0.008 m³ of concrete — covering roughly 0.10 m² at 75 mm depth or 0.08 m² at 100 mm depth. Standards: Complies with relevant British standards for high-strength ready-mixed concrete.

Eliza Tinsley 65mm Galvanised Springhead Nail - 10KG

The 65mm Galvanised Springhead Nail (10kg) is a high-quality, corrosion-resistant nail designed for various construction and roofing applications. The galvanised coating provides enhanced durability and rust resistance, making it suitable for outdoor use and exposure to moisture. The springhead design offers a secure and firm hold, reducing the risk of loosening over time. Key Features: Length: 65mm Material: Galvanised steel for rust resistance Head Type: Springhead for improved grip and holding power Weight: 10kg pack (approximate quantity varies) Usage: Ideal for roofing, fencing, and general construction work This nail type is commonly used in roofing felt and sheet materials, ensuring a strong and weather-resistant fix.

Eliza Tinsley 30mm Galvanised Presser Point Staples - Box of 5kg

Eliza Tinsley 40mm Galvanised Presser Point Staples - Tub of 10kg

Beatsons De-icing Rock Salt Grit (Small/Bulk Bags)

Rock salt used for clearing/preventing ice or snow on paths, de-icing roads and driveways. Grit salt is suitable for mixing with sand for additional surface traction on roads and paths. Perfect for rapid de-icing of paths, roads, driveways and steps Fast de-icing leaving surface free from ice with almost no residue Durable composition, prevents re-freezing

Beatsons Hessian Sand Bag

Beatsons Hessian Sand Bag now available online at Beatsons Direct.  Can be used to assist with flood prevention.  Free delivery available UK wide.  Sand not included with the sand bag. 

Beatsons Concrete Reinforcing Steel Mesh

A grid-like framework made of steel, used primarily to enhance the strength and durability of concrete structures. It provides tensile strength to concrete, which is inherently strong in compression but weak under tension. Reinforced mesh is commonly used for the reinforcement of concrete structures, foundations and floor slabs. Supplied in standard sheet sizes of 3.6m x 2.0m. Reducing the build-up of lap depth.

Knauf Plasterboard 2400 x 1200 mm

This plasterboard was created from the highest quality gypsum, making this standard wallboard a versatile option that can be used for partitions, walls and ceilings. You can fit this plasterboard in multiple layers to improve its performance. This is a perfect choice for projects with standard performance requirements, and it is cost-effective, helping you keep the costs of your projects down. Its Ivory Paper Face makes it ideal for direct decoration or a plaster finish.

Knauf Plasterboard 2700 x 1200 mm

This wallboard was created from the highest quality gypsum, making this standard wallboard a versatile option that can be used for partitions, walls and ceilings. You can fit this plasterboard in multiple layers to improve its performance. This is a perfect choice for projects with standard performance requirements, and it is cost-effective, helping you keep the costs of your projects down. Its Ivory Paper Face makes it ideal for direct decoration or a plaster finish.

Knauf Plasterboard 3000 x 1200

This wallboard was created from the highest quality gypsum, making this standard wallboard a versatile option that can be used for partitions, walls and ceilings. You can fit this plasterboard in multiple layers to improve its performance. This is a perfect choice for projects with standard performance requirements, and it is cost-effective, helping you keep the costs of your projects down. Its Ivory Paper Face makes it ideal for direct decoration or a plaster finish.

Knauf Fire Panel 2400 x 1200 mm

Knauf Fire Panel offers superior fire protection. The additional fire protection properties of Knauf Fire Panel make it ideal for use in domestic separating walls (normally walls between different apartments or house and garage for example), garages and corridors. In the event of a fire, as part of a drywall system, Fire Panel is designed to slow the spread of fire between rooms allowing for safe evacuation of the building. High Performance plasterboard giving improved fire protection when used as part of a full Knauf system

Knauf Moisture Panel 2400 x 1200 x 12.5mm

2400x1200x12.5mm Plasterboard Taper Edge Moisture Panel identified by its green paper face is designed for use in bathrooms, kitchens and areas of the house where moisture and humid conditions are present. The additives added to the core of the board repels moisture. The boards taper edge allows for a flush finish, which with suitable taping and jointing can create an invisible seam ready to receive either a plaster finish or direct decoration.

Knauf Vapour Panel 2400 x 1200 x 12.5mm

GTEC Standard Board with an additional laminated vapour control layer. The GTEC vapour board has the same physical property as the standard board but has a silver metallised polyester film back liner which enhances the vapour resistance of the product. GTEC Vapour can be jointed and finished with GTEC Jointing Systems. The boards require priming with GTEC Universal Sealer prior to decorating.

Knauf Plasterboard 1800 x 900 x 9.5mm

This wallboard was created from the highest quality gypsum, making this standard wallboard a versatile option that can be used for partitions, walls and ceilings. You can fit this plasterboard in multiple layers to improve its performance. This is a perfect choice for projects with standard performance requirements, and it is cost-effective, helping you keep the costs of your projects down.

Beatsons Concrete Common Brick Smooth With Frog

Key Features Summary High Structural Strength: Engineered from high-density, dense concrete for load-bearing reliability in general construction. Deep Frog Design: Features an indented top face ("frog") that holds mortar to increase joint bonding strength and overall wall stability. Excellent Frost & Moisture Resistance: Fully compliant for use above and below the Damp Proof Course (DPC) in freeze-thaw risk conditions. Smooth Standard Finish: Offers consistent dimensions and flat, smooth faces for clean alignment and uniform mortar lines. Versatile Construction Use: Suitable for internal load-bearing walls, foundations, partition walls, and background masonry for rendering.   Frequently Asked Questions (FAQ) Should the frog face up or down when laying? Standard bricklaying practice requires common bricks to be laid frog side up. Filling the entire frog with mortar ensures the finished wall achieves its full structural strength, load-bearing capacity, and sound insulation properties. Can these concrete commons be left exposed externally? While concrete commons can be used externally, they are primarily structural bricks. They are generally specified for background work, foundations, and walls that will be rendered, plastered, or face-clad. For visible decorative facades, a dedicated facing brick is usually recommended. How many concrete common bricks are needed per square metre? Using standard 10mm mortar joints, you will need approximately 60 bricks per square metre for a single-skin wall.  

Beatsons Edenhall Smooth Faced Brick

Give your construction project a sleek, contemporary aesthetic with Edenhall Smooth Faced Concrete Facing Bricks. Specially engineered for exterior facades, extensions, and modern architectural boundary walls, these premium concrete bricks combine high-performance structural durability with a clean, crisp, untextured finish. Manufactured using dense, high-quality aggregates blended with colorfast iron oxide pigments, these bricks offer excellent color longevity that resists fading over time. Whether you are building a modern residential property or a commercial development, Edenhall smooth facing bricks provide a uniform finish with sharp lines that elevate any external facade.

Beatsons Clay Common Brick Class 3

Features and Benefits -          Dimensions - 215 x 102.5 x 65mm -          Water Absorption - ≤10% -          Durability - F1 -          Size Tolerance Mean & Range - T2 & R1 -          Configuration - Vertically Perforated -          Active Soluble Salts - S2 -          Compressive Strength - ≥60 N/mm² -          Gross Dry Density - 1450 kg/m³ -          Pack Size - 452

Beatsons Zinc Ridges Straps Galvanised

Our Galvanised Zinc Ridge Strap is a type of hardware used in roofing. These straps are designed to secure or fasten materials such as ridge tiles, sheets, or panels in place, providing additional stability and support. Here’s a typical description: Material: Made from high-quality galvanised steel to provide excellent resistance against corrosion and rust, ideal for outdoor and exposed environments. Purpose: Used to secure ridge tiles, roofing sheets, or other structural components, ensuring stability and durability. Features: Pre-drilled holes for easy installation. Flexible design to suit various applications and roofing profiles. High tensile strength for reliable performance under load. Applications: Widely used in roofing, fencing, and general construction where strong and durable fastenings are required. Sizes: Available in 12" & 14" lengths to suit your specific requirements. Finish: Galvanised (Electro) coating for long-lasting protection against harsh weather conditions.

Beatsons Zinc Ridge

Zinc Roof Ridges – Durable, Weatherproof Ridge Capping Our Zinc Ridges provide a long-lasting and aesthetically pleasing solution for finishing pitched roof lines. Manufactured from high-quality zinc, these ridge caps offer excellent resistance to corrosion and weathering, making them ideal for both contemporary and traditional roofing projects. Designed for easy integration with zinc roofing panels or tiles, the ridges create a watertight seal at the roof apex, helping to prevent leaks and protect against wind uplift. Their sleek, low-maintenance finish naturally develops a protective patina over time, enhancing longevity and visual appeal. Key Features: Made from premium grade zinc Long-lasting and corrosion-resistant Compatible with a range of roofing systems Provides secure, watertight ridge coverage Maintenance-free with natural patina development Available in various profiles and lengths   Perfect for residential, commercial, and heritage buildings where performance meets architectural elegance.

Beatsons Standard 7N Concrete Blocks

Beatsons 7N Concrete Blocks are strong, durable concrete masonry units designed for a wide range of load-bearing and general construction applications. Available in 100mm and 140mm widths, these blocks provide a compressive strength of 7N/mm², making them ideal for structural walls, foundations, cavity wall construction and internal partitions in residential and commercial building projects.

Blue Circle Snowcrete White Cement 25kg

Snowcrete is the industry-leading white Portland cement, specifically designed for applications where aesthetic finish and color consistency are paramount. Whether you are aiming for a brilliant white finish or a vibrant decorative color, Snowcrete provides a high-strength, versatile base that outshines standard grey cement. Key Features Brilliant White Finish: Delivers a clean, bright aesthetic that enhances the appearance of any masonry or concrete project. Consistent Color Quality: Manufactured under strict controls to ensure uniform color throughout the bag and across different batches. Pigment Friendly: The neutral white base allows for more predictable and vivid results when mixing with cement dyes or pigments. High Strength: Meets the performance standards of BS EN 197-1, ensuring durability and structural integrity alongside its visual appeal. Versatile Application: Ideal for architectural concrete, rendering, floor screeds, and pointing.

Beatsons Weed Control Fabric

Weed Control Fabric is used to help prevent weeds growing. The geotextile weed fabric can be used under patios, gravel beds, raised beds, or structures that need to stay free of weeds. As it is permeable, water can pass through to let nutrients and water seep through to the soil. Benefits of our Weed Control Fabric: Prevents expensive aggregates from being lost into the sub soil Suitable for pedestrian & Vehicle applications Contributes at low maintenance gardening Air & Liquid permeable Extra Strong Tapes Suitable Applications: Aggregate areas / scree areas Garden paths Horse manège and root protection Under cellular confinement systems Under Type 1 for stability for: block paved drives, artificial grass, and roads

Beatsons 6mm Granite Dust

6mm Grano dust can be used for a range of purposes, it is ideal to be used as a sublayer under artificial grass and block paving. Grano dust can also be mixed with cement to make concrete, which is perfect for a range of outdoor building projects. -         Used in floor screeds and manhole covers -         Suited for monolithic and granolithic floor screed -         Ideal for commercial use   For a reasonable deep coverage. Bulk Bag 850kg coverage is approx 10m2 Small bag 20kg covers approximately .25 m2  

Beatsons Kiln Dried Sand 22kg Bag

Our kiln dried is a versatile sand – ideal for use in general building. Primarily used as a joint filler between block paving and patio slabs, providing a firm structure and preventing movement. - This sand is perfect for patios and block paving. - Can be brushed into the joints between paving to prevent movement whilst still allowing drainage. If you stay outside our local delivery area, you can order this product HERE

Beatsons Concrete Sand / Sharp Sand

Beatsons Concrete Sand, also known as Sharp Sand or grit sand, is a coarse, washed and screened sand for building and landscaping projects. Its gritty, angular texture compacts to a firm, free-draining base, making it ideal for bedding block paving, laying patio slabs and mixing concrete or floor screeds. It is available in an 850kg bulk bag covering approx. 10m² at 50mm depth (2 inches), or a handy 25kg bag covering approx. 0.3m² for smaller jobs and repairs. Choose next-day delivery or Click & Collect from your local Beatsons branch.

Beatsons White Building Sand

Beatsons White Sand, also known as White Building Sand, White Mortar Sand, or FS1 sand, is a fine-grade silica sand with sub-rounded grains. Its consistent grain size and high silica content improve both the workability and strength of mortar mixes. It is the preferred choice for tradespeople and DIYers wanting a clean, light-coloured finish on brickwork, pointing, or rendering projects. Available in a 20kg bag for smaller jobs or an 850kg bulk bag for larger builds, it suits both domestic and commercial applications.

Beatsons Whin Dust

Beatsons Whin Dust is a 0-4mm crushed whinstone (basalt) aggregate, ideal as a sub-base and screeding layer for artificial grass, block paving, and garden pathways. Also known as quarry dust, its angular particles compact into a firm, moisture-resistant surface, offering superior binding and drainage compared to standard soft sand. Available in convenient 25kg bags or 850kg Bulk Bags, it suits small DIY jobs and larger landscaping projects alike. Sourced from durable Scottish basalt rock, Whin Dust resists wash-out and provides a stable, level base beneath paving flags, artificial turf, or driveways. Order online for Click & Collect or branch delivery across Scotland. Please note: customers in Glasgow and the surrounding area served by the Cumbernauld branch will receive Red Granite Sand as a substitute, as this is the only stock held at that branch.