Everbuild SikaBond PVA+ D2 Bonding Agent

Sikabond PVA+ / similar SikaBond PVA D2 is a polyvinyl acetate (PVA)‑based bonding agent — a white, water‑based liquid used as a general‑purpose adhesive, primer, sealer and admixture in building and renovation work. It is classified to EN 204:2016 as a D2 wood adhesive, meaning it meets specific standards for interior moisture resistance and bonding performance. Typical Uses   SikaBond PVA D2 is highly versatile and can be used for: ✔ Bonding plaster, wood, paper, textiles, cork and other porous materials.  ✔ Acting as a bonding agent for plaster, cement screeds and render to sound substrates such as concrete, brick or stone. Sika UK ✔ Primer & sealer before plastering, tiling or painting to improve adhesion and reduce suction. Sika UK ✔ Mortar admixture to improve adhesion in screeds, renders or repair mortars. Sika UK ✔ Filling applications (e.g., mixed with wood shavings or plaster as an internal filler).

Everbuild Sika PVA Bonding agent 1LTR

Everbuild 501 Universal PVA Bond is a multi‑purpose bonding agent, primer, sealer and admixture used widely in construction and DIY. It’s a medium‑viscosity polyvinyl acetate (PVA) emulsion, stabilized with polyvinyl alcohol and externally plasticised with a vinyl acetate homopolymer. It does not contain harmful phthalates. Key Uses   Acts as a general‑purpose adhesive for wood, cork, paper, textiles and other porous materials. Used as an admixture in mortar, screeds and renders to improve performance. Works as a bonding agent for screeds and renders to poorly bonded or dense substrates (concrete, tiles, etc). Can be applied as a primer/sealer before plastering or tiling to seal porous surfaces.  When mixed with materials (e.g., wood shavings and plaster), it can be used as an internal filler.

Everbuild 502 Weatherproof wood Adhesive/Glue

Can be used internally and externally and provides a high strength, impact resistance bond that is usually stronger than the wood itself. Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use. Dries clear. Fast cure, initial set in just 10 minutes. Advantages • Excellent rate of bond strength development.• High degree of water resistance. D3 Classification. • Interior/exterior use. • Low timber staining characteristics - will not stain.• Dries clear - contains no inert fillers.• Water based - environmentally friendly/easy clean up.• Suitable for radio frequency cure.  

Everbuild Miter Fast Bonding Kit

Everbuild Mitre Fast Bonding Kit is a two-part instant adhesive system designed to rapidly bond mitre joints and other materials in furniture, timber, kitchen and plastics applications. It combines a high-viscosity cyanoacrylate adhesive with an aerosol activator to create strong bonds in a fraction of the time needed with traditional wood glues. How It Works   Two-part system: Includes a cyanoacrylate glue and a spray activator. Flash setting: Bonds most materials in about 10 seconds once the activator and adhesive are applied.  High viscosity: Minimises soak-in on porous substrates (e.g., wood), improving bond strength over ordinary cyanoacrylate glues. Gap-filling: Fills small gaps up to about 0.2 mm in mitre joints.   

Everbuild 503 SBR Bond 5L

The Everbuild 503 SBR Bond Waterproof Bonding Agent is a professional-grade solution designed to meet the demands of large-scale construction and renovation projects. Supplied in a 5L container, this versatile product acts as a waterproof bonding agent, primer, sealer, and admixture, making it an essential tool for professionals and contractors.  Whether you’re bonding, sealing, or waterproofing surfaces, Everbuild 503 SBR Bond provides unmatched versatility and reliability. Its advanced formula enhances the strength, flexibility, and water resistance of cement-based materials, making it suitable for demanding environments such as basements, kitchens, bathrooms, and outdoor structures. This 5 litre size is ideal for tackling extensive projects, saving time and effort with fewer refills.

Everbuild Sealant Strip Out Tool

The Strip-Out Tool is a unique patented tool which works on any type of sealant and is the ideal partner for use before applying Forever White silicone sealant. The Strip-Out Tool is incredibly simple and its design and shape provides a really quick way to strip all types of sealant out of any 90° angle joint.

Everbuild Dual Purpose Foam Cleaner

Everbuild Dual Purpose Foam Cleaner is a specialised aerosol cleaning product designed for use with uncured polyurethane (PU) foams. It contains a powerful solvent that dissolves and removes wet (uncured) foam from foam guns, nozzles, and most common building substrates. The product is particularly useful after applying expanding foam to clean tools and clear accidental foam spills before the foam hardens. Key Features   Dual-purpose design: Can be used both through a foam gun applicator for internal cleaning and as a regular spray using the included nozzle for external cleaning. Solvent-based aerosol: Formulated to dissolve uncured PU foam quickly and efficiently. Separate spray nozzle: Included for versatile use without an applicator. Extends tool life: Helps keep foam guns and nozzles clean so they can be reused many times.

Everbuild Fire Foam B2 Handheld

Firefoam B2 Handheld is a quick setting fire rated, one part polyurethane foam in a ready to use hand held canister. Fire resistant for up to 2 hours in certain joint configurations. It expands on application to up to 50 times the can contents and meets the requirements of the test criteria for BS 476 Part 20.

Everbuild Fire Foam B2 Gun Grade 750ml

Firefoam B2 Gungrade is a quick setting fire rated, one-part polyurethane foam designed for application by any standard foam applicator gun.   High degree of fire rating: slows down the passage of flames and smoke in comparison to standard B3 grades Fire resistant for up to 2 hours in certain joint configurations Quick setting – can be cut, sawn or plastered in 1 hour Expands up to 50 times original can volume Possesses insulating and sound deadening properties Meets the requirements of the test criteria for BS476 Part 20 When used as part of a fire-rated joint, use in conjunction with Everbuild Firemate intumescent sealant for maximum fire rating

Everbuild Opti-Mix Mortar Plasticiser

Everbuild Opti-Mix Mortar Plasticiser is a highly concentrated, air-entraining liquid plasticising admixture designed to improve the properties and performance of mortar mixes. It comes in a self-gauging 1 L bottle. Key Features Highly concentrated formula – 1 L of Opti-Mix is equivalent in performance to approximately 25 L of conventional mortar plasticiser, reducing waste and storage needs. Air-entraining action – forms stable microscopic air bubbles within the mortar mix to improve workability. Application Notes   Typical dosage is 5–10 ml per 50 kg of cement. Add the product to the gauging water before mixing with dry materials — do not mix directly into the dry components.

Everbuild Accelerator & Frostproofer 203 5ltr

Everbuild 203 Accelerator & Frostproofer is a chloride-free liquid admixture designed for use in cement-based mixes to speed up setting and hardening and to protect fresh mortar/concrete from frost damage during cold weather. Key Features   Accelerates setting and hardening times of mortar, concrete, screeds and renders — useful in cold conditions or when rapid set is needed. Frost protection: helps prevent freeze-thaw damage to fresh mixes in temperatures down to around -8 °C. Chloride-free, non-corrosive formula, making it safer with embedded metal (e.g., brick ties). Conforms to EN 934-2 Table 7 (standard for concrete admixtures)

Everbuild Fungicidal wash 404 5LTR

EVERBUILD® 404 Fungicidal Wash is a powerful, fast[1]acting solution which is effective on most surfaces. It quickly removes fungus and lichen from floors, walls, drives and roofs. It also leaves a residual surface to help prevent further infestation

Everbuild Brick & Patio Cleaner 5LTR

Everbuild Opti-Mix Mortar Plasticiser is a highly concentrated air-entraining liquid plasticising admixture designed to improve the performance and workability of mortar mixes. It’s much stronger than standard plasticisers — 1 litre effectively replaces about 25 litres of conventional mortar plasticiser. Key Features Superior Plasticising Action: Forms very stable micro air bubbles in the mortar, improving the consistency and workability — often described as giving a “buttery” consistency that’s easier to apply and finish. Improved Durability: Helps reduce shrinkage, cracking and curling as mortar cures, and gives enhanced resistance to mild frost and freeze-thaw cycles. Reduces Efflorescence: By replacing lime in the mix, it can help lower the chance of salt deposits (efflorescence) forming on the surface. Highly Concentrated: A small dosage — typically 5–10 ml per 50 kg cement — is enough to improve mortar properties significantly. Easy to Use: Supplied in a self-gauging bottle for controlled dosing.

Everbuild One Strike Filler 1ltr

One Strike is a revolutionary filler formulated using lightweight polymer bubbles that fills holes and cracks, even deep holes, in just one quick application. There is no need for secondary filling to level off as the filler will not shrink, sag or crack.  Easy to apply No sanding required – finishes to a smooth surface Quick drying – ready to paint/paper in approx. 30 minutes Fills up to 75mm deep in one application No sagging or shrinkage Overpaintable with most solvent based and emulsion paints Overstainable Suitable for internal and external use Dries brilliant white

Everbuild Cement Dye

Powder Mortar Tone is formulated from best quality oxide pigments for permanently colouring all types of mortars, rendering, concrete and pointing.   The pigments disperse easily into the mix to give a uniform shade for each mix batch. Shading can be adjusted to provide a wider variety of colour depths.   Permanently colours cement based products - light fast pigments will not fade. Improves workability/trowelability - contains a plasticizer. Chloride free (chloride ion content < 0.1%). Reduces bleeding/segregation. Inhibits efflorescence.