Brett Martin Axedo 160x150mm Spigot x Socket UltraRib Adaptor

Our adaptor (spigot-to-socket) designed to connect a 160 mm outlet (spigot) — typically from an inspection chamber (e.g. part of the Brett Martin “Axedo” system) — to a 150 mm “Twinwall” surface-water drainage pipe. “Twinwall” refers to double-walled (corrugated) polyethylene drainage pipe, commonly used for surface water and land drainage applications.  Typical Use Cases   Used where you need to join a rigid 160 mm inspection-chamber outlet to a 150 mm Twinwall drainage pipe — e.g. in surface water drainage, land drainage, soakaways, or storm-water systems. Useful in both domestic and agricultural or civil-engineering drainage setups, where Twinwall pipework is preferred for surface or storm drainage.

Brett Martin Axedo 315mm Spigot x Socket Twinwall Adaptor

The adaptor is part of the Brett Martin “Axedo / Adopta” drainage and sewer‑pipe system — a range designed to meet regulatory standards for adoptable and non‑adoptable drainage networks across the UK. Specifically, the 315 mm spigot-to-socket Twinwall adaptor enables the connection between compatible Twinwall (surface / stormwater) pipes and other drainage elements — essentially bridging or adapting pipe ends to ensure proper jointing in underground drainage or surface‑water systems.

Brett Martin Axedo 250mm Spigot x Socket Twinwall Adaptor

The adaptor is part of the Brett Martin “Axedo / Twinwall” drainage system. It provides a spigot‑to‑socket connection between an Axedo inspection chamber (or base) and a Twinwall drainage pipe. Specifically, it matches a 250 mm Axedo (spigot) to a Twinwall pipe — enabling integration of rigid chamber components with flexible Twinwall pipework. Purpose & Application This adaptor is used to:   Connect a non‑entry inspection chamber (or chamber base) from the Axedo range to a Twinwall drainage pipe network. Provide a reliable transition between chamber and pipework in surface water or land‑drainage systems. Be part of adoptable drainage systems — accepted by UK water authorities under the broader Brett Martin “Adopta” range. 

Brett Martin Axedo 160x150mm Spigot x Socket Twinwall Adaptor

Our adaptor (spigot-to-socket) designed to connect a 160 mm outlet (spigot) — typically from an inspection chamber (e.g. part of the Brett Martin “Axedo” system) — to a 150 mm “Twinwall” surface-water drainage pipe. “Twinwall” refers to double-walled (corrugated) polyethylene drainage pipe, commonly used for surface water and land drainage applications.  Typical Use Cases   Used where you need to join a rigid 160 mm inspection-chamber outlet to a 150 mm Twinwall drainage pipe — e.g. in surface water drainage, land drainage, soakaways, or storm-water systems. Useful in both domestic and agricultural or civil-engineering drainage setups, where Twinwall pipework is preferred for surface or storm drainage.

Brett Martin 450mm to 350mm Twinwall Riser Restriction Ring for use with 45TP15 & 45TP3

The product is a restriction / reducer ring (sometimes called a “chamber reducer” or “inspection chamber reducer”) — used in underground drainage and inspection-chamber systems. It reduces the internal diameter from 450 mm down to 350 mm. It’s designed for use with 450 mm inspection chambers (or chamber assemblies) — when you need a smaller 350 mm access opening.

Brett Martin 600mm Twinwall Riser

This is part of the 600 mm diameter twin-wall drainage pipe system from Brett Martin. It is a rigid, unperforated twinwall riser / pipe — meaning it’s not a flexible hose, but a solid-wall corrugated pipe designed for drainage, stormwater or surface-water applications.

Brett Martin 450mm Twinwall Riser

This is a 450 mm-diameter chamber riser designed for use with underground inspection chambers and drainage systems.It serves as a mid-section (or “riser”) to extend the height of a chamber base so that the inspection chamber cover sits flush with ground level. It is part of a full inspection-chamber system from Brett Martin, which includes bases, lids/frames, sealing rings, and riser sections.

Brett Martin Coupler Twinwall

The Brett Martin Coupler Twinwall is a durable connector designed for use with twinwall pipes. It ensures a secure, watertight joint and is suitable for above- and below-ground drainage applications. Made from robust materials, it offers long-lasting performance and easy installation.

Brett Martin Sealing Ring Twinwall

The Brett Martin Twinwall Sealing Ring is a rubber (EPDM) ring seal designed for use with Twinwall drainage pipe systems — specifically to join and seal sections of twinwall surface-water / land-drainage pipe and fittings. It comes in a range of nominal diameters (e.g. 150 mm, 225 mm, 300 mm, 375 mm, 450 mm, 600 mm) to match the corresponding twinwall pipe sizes.

Brett Martin 6M Perforated Plain End Twinwall Pipe

✅ What it is — product spec & build Made by Brett Martin. Their “twinwall” surface-water pipe range is available in perforated, half-perforated, or unperforated forms — and in diameters from 150 mm up to 600 mm.  Supplied as a rigid 6 metre length with plain ends (i.e. not socketed). Made of polyethylene (HDPE). Outer wall is corrugated (for strength), inner wall is smooth (for efficient flow). Lightweight compared with traditional concrete drainage pipes; easier to handle, transport, and install. Designed to resist natural soil chemicals and handle a wide variety of soil conditions. The “perforated” variant means the pipe has small slots/holes → used to collect and drain surface or subsurface water (rather than simply conduct a forced flow). 

Brett Martin 6M Plain End Twinwall Pipe

✅ What it is / What it’s used for This is a 6-metre-long twinwall surface-water drain pipe, plain-ended (i.e. not socketed). It’s made of polyethylene (PE) — a lightweight, chemical-resistant material suitable for a wide range of soil and drainage conditions. Suitable for “surface water” drainage — e.g. land drainage, French drains, agricultural drainage, retaining walls, highway/rail drainage and general storm water management.  The twinwall (ribbed) design gives rigidity so the pipe resists deformation and can handle high compressive loads — good when buried underground. Internal surface is smooth to promote efficient hydraulic flow (less friction).  According to the supplier, its service life “surpasses 50 years” under typical conditions.

Brett Martin 45° Double Socket Twinwall Bend with Seal

Brett Martin 45° double-socket bend for twinwall drainage pipe systems — a pre-formed angled fitting that lets you change the direction of a drainage run by 45°. It is designed to be used with twinwall surface‑water drainage pipes.

Brett Martin 90° Twinwall Tripple Socket Branch

This is a 90° Triple-Socket Branch (T-junction / T-branch) designed for twinwall drainage/ surface water systems. “Triple socket” means it has three socket-ends — one for the incoming (main) pipe and two for branching or continuation — allowing three pipes of equal diameter to meet or split at a 90° angle.

Brett Martin 45° triple socket Branch Twinwall with Seals

This is a 45° twinwall junction / branch fitting from Brett Martin, designed for use in surface‑water / land‑drainage systems using twinwall drainage pipe. It’s part of Brett Martin’s “Twinwall Multi‑Fittings” range, which covers nominal pipe diameters of 150 mm, 225 mm and 300 mm. The junction comes with seals included — no need to order sealing rings separately (for the nominal sizes covered).

Brett Martin 225mm 30 Degree Socket Twinwall Bend

This is a double-socket bend for 225 mm internal (≈ 268 mm external) twinwall drainage pipe. The bend provides a 30-degree angle, useful for changing the direction of drainage runs where a modest offset is needed. It is part of the Brett Martin's twinwall drainage system — made from polyethylene (PE), giving a lightweight, robust and corrosion-resistant fitting suitable for surface water, storm water, land drainage, and other similar drainage applications (e.g. highway, agricultural, rail, airport, culverts). The internal twinwall structure (ribbed body) provides high rigidity and resistance to deformation, helping the fitting maintain its shape under load and giving long-term durability. The double-socket design allows it to connect easily with compatible twinwall pipes, ensuring consistent internal socket diameter and easier assembly.  The product is compatible with other BBA-approved twinwall pipes and fittings (as per the manufacturer’s compatibility lists), which helps if mixing components from different but compliant suppliers. For watertight joining, sealing rings (typically two per bend) are required. Some suppliers include these with the bend, but it’s worth checking on your order to ensure the seal is included.

Brett Martin 90° Socket Twinwall Bend

The 90° bend lets you change direction in drainage pipe runs, commonly used in surface water or stormwater drainage systems for domestic, agricultural, or civil-engineering drainage. Because it’s compatible with other BBA-certified twinwall pipes/fittings, it integrates into broader drainage networks (e.g. land drains, soakaways, soakaway-crate systems, French drains, etc.) Sies and standards The twinwall fittings from this range cover nominal pipe diameters from 150 mm up to 300 mm (and larger for bigger systems) depending on application. The 90° double socket bends (like TB90) are listed among the standard fittings in the manufacturer’s product guide. Seals for twinwall fittings conform to recognised standards (e.g., rubber ring seals to BS EN 681‑1).

Brett Martin 225mm x 150mm 90 Degree Twinwall Branch

This is a 90° twinwall branch junction (also described as a “triple socket branch”) from Brett Martin, with a 225 mm main pipe connection and a 150 mm branch. It is designed for use in surface water drainage, stormwater drainage, and general land drainage systems — such as highway drainage, agricultural drainage, rail/airport drainage, or landfill drainage. You’d use this junction when you have a main 225 mm twinwall drainage line (e.g. carrying surface water runoff) and need to branch off a 150 mm line — for example to redirect some flow to a different drainage run, to divert water to a soakaway, or connect to another drainage utility. The 90° angle is useful where the branch must go off at a right angle from the main run.

Brett Martin 45° Junction Twinwall Branch with Seals

This is a 45° junction (also sometimes called a “Y-junction”) designed for use in underground drainage / surface-water management systems. It is a twinwall-style junction, meaning it’s designed to connect with twinwall drainage pipe (corrugated or twin-walled pipe) rather than traditional solid-wall sewer pipe. It comes with integral or supplied seals (rubber sealing rings), so that pipes inserted into its sockets form a watertight connection without needing additional sealing components.

Brett Martin 300mm 90 Degree Bend Twinwall

Nominal diameter: 300 mm Twinwall pipe system. Fitting type: 90° bend (double‐socket) — designed to change direction by 90° in a Twinwall drainage run. Socket type: Double socket (inlet + outlet) – this is typical for a bend rather than a branch. Material: High‐density polyethylene (HDPE) Twinwall construction (corrugated outer wall, smooth bore inner wall) — typical for surface water Twinwall drainage systems. Certification / range: The Brett Martin Twinwall brochure lists the “300mm 90° double socket bend” code 3TB90 in its nominal size 300 mm list.

Brett Martin 300mmx150mm 90 Degree Twinwall Branch

Format: Triple‐socket branch fitting (three connections) in a twinwall drainage system. Nominal sizes: Main run diameter = 300 mm, branch diameter = 150 mm. Branch angle: 90° (right angle). Material: High‐density polyethylene (HDPE) Twinwall – corrugated outer wall, smooth bore inner. This is standard for the Brett Martin Twinwall pipe/fitting system. Certification: Part of the Twinwall multi‐fittings range that is covered by the BBA certificate (10/H168) for the 150mm-300mm diameter range.

Brett Martin 300mmx225mm 90 Degree Twinwall Branch

Manufacturer: Brett Martin Product Code: 3TT290 – describes a 300 mm main diameter with a 225 mm branch at 90°. Type: Triple‐Socket Branch, 90° angle (right‐angle) within a Twinwall (HDPE) underground drainage system. Sizes: Main run nominal diameter 300 mm; branch nominal diameter 225 mm. (300 mm × 225 mm) Material: High Density Polyethylene (HDPE) Twinwall pipe/fitting system (corrugated outer wall / smooth bore inner wall) for surface water drainage.   Compatibility: Designed to work with BBA-approved Twinwall pipe systems (150 mm, 225 mm, 300 mm) under the same approval certificate (10/H168)

Brett Martin 300mm 45 Degree x 225mm Junction

  Size / Configuration: Main run nominal diameter = 300 mm, branch nominal diameter = 225 mm, branch angle = 45°. Type: Triple-socket branch (i.e., a three-way fitting: one inlet, one outlet continuing the 300mm main run, and one branch of 225mm at 45°) in a Twinwall drainage system. Material: High-density polyethylene (HDPE) Twinwall pipe/fitting system (corrugated outer, smooth bore inner) for surface water drainage. (General specification for Brett Martin Twinwall range) Certification / Standards: The catalogue lists this and other similar fittings under the “Junctions BBA Cert 10/H168†” for 150mm–300mm diameter range.

Brett Martin 15° Bend Twinwall

The Brett Martin 15° Bend Twinwall is a double‑socket bend fitting designed for use with twinwall drainage pipe systems, enabling a 15° directional change in underground or surface water drainage layouts. It’s part of the surface‑water twinwall range from Brett Martin, compatible with their polyethylene twinwall pipes in diameters ranging from 150 mm up to 300 mm (and generally up to 600 mm for twinwall pipe runs, though fittings are for 150–300 mm).