Beatsons C24 Timber

Planed C24 Regularised 4 E/E Treated Carcassing Treatment: Pressure-treated Strength class: C24 Suitable for: Framing, General construction, Joists, Carcassing, Stud walling, Timber frames Length 4.8m 

Beatsons Viper Galvanised Ring Nail

Boxes of Collated Galvanised nails for a nail gun, These nails come with a gas canister. Comes in sizes 50mm, 64mm, 75mm and 90mm. *Please note that the 90mm are smooth and not a ring nail.   - 90mm and 75mm come with 2200 nails  - 50mm and 64mm come with 3300 nails

Beatsons CLS Treated - 4.8m

Build with confidence using our high-quality CLS (Canadian Lumber Standard) timber. Specifically designed for internal structural use, our CLS is the go-to choice for framing, partitioning, and floor joists. Engineered for strength and ease of use, each piece undergoes a rigorous planing process to ensure a smooth finish and consistent dimensions, making it a favorite for both professional contractors and DIY enthusiasts. Common Applications Internal Partitioning: The perfect backbone for stud walls and room dividers. Timber Frame Construction: Reliable structural support for modern builds. Bespoke Joinery: Ideal for creating carcasses for built-in wardrobes and shelving units. Floor & Ceiling Joists: Provides a flat, level surface for boarding. Pro Tip: When calculating your materials, remember that "CLS" dimensions are slightly smaller than traditional sawn timber due to the planing process. For example, a "3x2" (75mm x 50mm) nominal size usually finishes at 38mm x 63mm.

Beatsons C16 Timber

C16 regulated timber refers to a classification of structural timber that meets specific strength and quality requirements as outlined in European standards, particularly BS EN 338. The "C16" grade indicates that the timber is suitable for use in structural applications, such as beams, joists, and rafters, where moderate strength is required. Key Features  C16 timber is strong enough for many construction applications, such as floor joists, roof trusses, and stud walls. It is designed to withstand moderate loads but is not as strong as higher-graded timber, such as C24. Common Applications: Flooring joists Ceiling joists Stud partitions General construction where high loads are not a primary concern

Beatsons CLS Treated - 2.4m Length

Our CLS is C16 graded, regularised for consistent size, and rounded on 4 edges for comfort whilst handling. Our CLS is kiln dried making it perfect for building internal walls and partitions. This timber has been pressure treated to protect against fungal and insect attack. Why Choose CLS Over Sawn Timber? Unlike standard "sawn" timber, which can be rough, uneven, and prone to movement, CLS is dimensionally accurate. This means every piece is the same thickness and width, ensuring your walls are perfectly straight and your plasterboard sits flush. Pro Tip: When calculating your project, remember that CLS "nominal" sizes (like 50x75mm) refer to the wood before it is planed. The finished size will be slightly smaller (e.g., 38x63mm). Always plan your measurements based on the finished dimensions!