A Brass 1/2" Type A Drain Cock is a valve used for draining liquids, typically in plumbing, heating, or compressed air systems. It is designed to allow controlled release of water or other fluids from tanks, radiators, or pipelines. Features & Specifications: Material: Brass (corrosion-resistant, durable) Size: 1/2" (nominal pipe size) Type: Type A (typically refers to a standard drain cock with a simple twist or lever mechanism) Connection: Threaded (commonly BSP or NPT) for secure attachment Operation: Manually operated via a lever or screw-type mechanism Applications: Used in plumbing systems, radiators, air compressors, and industrial equipment to drain water or condensate
A 10mm Compression Equal Tee is a type of plumbing fitting used to connect three sections of pipe in a T-shaped configuration. It is typically used in water, gas, and heating systems. The fitting allows two pipes of the same diameter (in this case, 10mm) to be connected at a right angle to a third pipe, providing a branching point for fluid or gas flow. Key features: Size: 10mm, meaning the fitting is designed for use with 10mm pipes. Compression fitting: Uses a compression nut and ring to secure the pipes in place without the need for soldering or welding. Material: Commonly made of brass or copper for durability and corrosion resistance. Equal tee: Ensures that all three connections are of the same size, making it suitable for branching systems that require equal flow from each connected pipe. Application: Common in household plumbing, irrigation, and heating systems.
A 10mm Solder Ring Equal Tee is a type of plumbing fitting commonly used in pipe systems to join three pipes together in a "T" shape. This fitting has three connections, with two on either side and one in the middle. The key features of a solder ring equal tee include: Size: It is designed to fit 10mm diameter pipes, typically used in water, gas, or heating systems. Material: The fitting is made from copper, ensuring durability and resistance to corrosion. Solder Ring: It comes with an integrated solder ring that helps to create a strong and leak-proof joint when the fitting is heated. The solder ring is a small ring of flux and solder that melts when heated, forming a seal between the pipes and the fitting. Application: It is typically used for plumbing installations where a tee connection is required, such as connecting branches to a main water line or heating circuit. Equal Tee: This type of tee fitting has the same size connections on all three outlets (i.e., 10mm on each side).
A 10mm Solder Ring Stop End is a plumbing fitting typically used for terminating a copper pipe at the end of a run. It's designed for use in pressurized water systems and is often installed at the end of a pipe to seal it off, preventing water flow. The key features include: 10mm Size: The diameter of the pipe it is designed to fit. In this case, it fits 10mm copper pipes. Solder Ring: This refers to the built-in ring of solder that melts when heated, ensuring a watertight seal between the stop end and the pipe. Stop End Function: It effectively blocks the flow of water at the end of the pipe, acting as a cap or end fitting. Material: Generally made of copper, providing durability and resistance to corrosion. These fittings are commonly used in both domestic and commercial plumbing applications, particularly for installations involving copper piping systems. The solder ring ensures a secure and permanent connection when properly heated and applied.
10mm Solder Ring Straight Coupling
A 10mm Solder Ring Straight Coupling is a plumbing fitting used to connect two pipes of the same diameter (10mm) in a straight line. It features a pre-applied ring of solder inside the fitting, which melts when heat is applied, creating a secure and leak-proof joint. Key Features: Material: Typically made of copper or brass for durability and corrosion resistance. Size: Designed for 10mm pipes, commonly used in domestic and commercial plumbing systems. Pre-Soldered Ring: Ensures a reliable and consistent joint with minimal effort. Application: Suitable for hot and cold water systems, central heating, and gas installations. Ease of Use: Requires only heat and flux for installation—ideal for professional plumbers and DIY enthusiasts.
10mm Straight Compression Coupling
A 10mm Straight Compression Coupling is a plumbing fitting used to connect two pipes of equal diameter (10mm) in a straight line. It provides a secure, leak-free connection without the need for soldering or welding, making it ideal for various applications, including water, gas, and heating systems. Key Features: Material: Typically made from brass or stainless steel for durability and corrosion resistance. Size: Designed for 10mm pipes. Connection Type: Compression fitting with nuts and olives (ferrules) to create a watertight seal. Application: Suitable for water, gas, and heating pipework in domestic and commercial installations. Installation: No special tools required—tightened using a standard spanner or wrench. Reusability: Can be dismantled and reassembled without damaging the pipes.
1½" ASC10 Adjustable Inlet Tubular Swivel 'P' Trap
The McAlpine 1½" ASC10 Adjustable Inlet Tubular Swivel 'P' Trap is a versatile plumbing component designed to efficiently manage wastewater from sinks, dishwashers, washing machines, and condensing boilers. Key Features: 75mm Water Seal: Provides an effective barrier against sewer gases, ensuring a hygienic environment. Multifit Compression Outlet: The 1½" outlet is compatible with various pipe materials, including plastic, copper, and lead, offering flexibility in installation. Adjustable Inlet: Accommodates different pipe configurations, making it suitable for a wide range of domestic repair, maintenance, and improvement projects. Durable Construction: Manufactured from high-temperature white polypropylene, ensuring longevity and resistance to wear. Compliance: Conforms to BS EN 274-1:2002 standards, guaranteeing quality and reliability. This 'P' trap is ideal for installations where space constraints or specific pipe alignments require a flexible solution.
1½" FJ10 75mm Seal Bath Trap with Flexible Overflow
The McAlpine FJ10 1½" 75mm Seal Bath Trap with Flexible Overflow is a plumbing component designed for bathtub installations. It features a 75mm water seal, a chrome-plated overflow grating, and a flexible overflow tube, ensuring efficient drainage and a sleek appearance. The 1½" multifit outlet is compatible with plastic, copper, and lead pipes, offering versatility during installation. Manufactured from durable polypropylene, this bath trap conforms to BS EN 274-1:2002 standards, ensuring long-lasting performance. Key Features: 75mm Water Seal: Prevents foul odors from entering the bathroom by maintaining a water barrier. Chrome-Plated Overflow Grating: Provides a modern aesthetic and resists corrosion. Flexible Overflow Tube: Allows for easy alignment with existing plumbing, simplifying installation. 1½" Multifit Outlet: Compatible with plastic, copper, and lead pipes, accommodating various plumbing systems. Durable Construction: Made from high-quality polypropylene for longevity and reliability.
1½" FLEXCON2 Flexible Connector - Universal x Plain Spigot
The FLEXCON2 is a highly versatile, professional-grade flexible plumbing connector designed to bridge gaps in drainage systems where rigid pipework is difficult to align. Featuring a Universal socket on one end and a Plain Spigot on the other, it provides a "problem-solver" solution for unconventional plumbing layouts. Key Features & Benefits Universal Connection: The socket end is designed to accept various pipe types, making it compatible with most 1½" plastic waste pipes (ABS, PVC, or Polypropylene). Plain Spigot End: The spigot side is sized to fit directly into a standard 1½" compression or solvent weld fitting, acting just like a piece of rigid pipe. Extreme Flexibility: Can be bent into tight radii, offset to correct misalignments, or extended to bridge gaps, significantly reducing the need for multiple elbow joints. Space Saving: Ideal for tight spots under sinks, behind pedestals, or within vanity units where rigid piping is too bulky.
1½" MT20 135° Multifit Bend Waste Fitting
The MT20 Multifit Bend is a high-performance plumbing essential designed for maximum versatility and reliability. Whether you are dealing with slightly off-set pipework or a standard 45° turn (135° angle), this fitting takes the guesswork out of waste installation. Key Features Multifit Technology: The standout feature. It is designed to be compatible with almost any 1½" (40mm) plastic pipe, including: Push-fit waste pipe Solvent weld waste pipe Copper pipe (with appropriate sizing) Leak-Proof Seal: Features a robust internal grip ring and a rubber "O" ring seal, ensuring a watertight connection even if the pipe isn't perfectly cut. 135° Angle: Provides a smooth 45° change in direction, which is ideal for maintaining optimal flow and reducing the risk of blockages compared to sharp 90° bends. Durable Construction: Manufactured from high-grade polypropylene, making it resistant to boiling water and most household chemicals.
1½" MT4 90° Multifit Bend Waste Fitting
This fitting is a staple for plumbing installs where space is tight and versatility is a requirement. The 1½" MT4 90° Multifit Bend is engineered to connect different piping materials without the need for specialized adapters. Key Features & Benefits Multifit Technology: Designed to create a secure, leak-proof seal with various pipe types, including push-fit, solvent weld, and copper. Space-Saving 90° Angle: Perfect for tight corners or redirecting waste flow behind pedestals and under sinks. Durable Construction: Manufactured from high-grade polypropylene, ensuring resistance to common household chemicals and high water temperatures. Hand-Tighten Installation: Features a compression-style nut and rubber seal, allowing for a tool-free (and stress-free) installation that can be easily adjusted or removed. Universal Sizing: The 1½" (approx. 40mm) diameter is the standard size for kitchen sinks, washing machines, and dishwashers.
1½" Q10 19mm Seal Bath Trap
19mm Water Seal Multifit Outlet Bath Trap 19mm Water Seal Multifit Compression Outlet suits all plastic, copper and lead pipe Suitable for Use with McAlpine Bath Wastes Manufactured in polypropylene
1½" S29 Straight Connector - Multifit x BSP Female thread
This specific plumbing component, the 1½" S29 Straight Connector, is a versatile "Multifit" adapter designed to bridge different piping systems. It is commonly used in waste drainage systems (like sinks or basins) where you need to connect plastic pipe to a threaded metal or plastic fitting. Key Specifications Multifit Technology: The "Multifit" end features a compression-style seal. Unlike solvent-weld fittings (which require glue), this uses a nut and a rubber internal washer. This allows it to connect to: Polypropylene (PP) pipe Polyethylene (PE) pipe ABS plastic pipe Copper pipe (provided it matches the external diameter) BSP Female Thread: The other end is a standard 1½" British Standard Pipe (BSP) female thread. This is the universal sizing used in UK plumbing for connecting to taps, valves, or male-threaded waste outlets. Straight Design: This is a "coupling" or "union," meaning it connects two components in a direct, linear line without any angle or bend.
1½" SC10 Tubular Swivel 'P' Trap
The McAlpine 1½" SC10 Tubular Swivel 'P' Trap is a plumbing component designed to efficiently drain wastewater from sinks, baths, and basins while preventing unpleasant odors from entering the living space. Key Features: 75mm Water Seal: The trap maintains a 75mm water seal, effectively blocking sewer gases and odors. Multifit Compression Outlet: Equipped with a multifit compression outlet, the SC10 is compatible with various pipe materials, including plastic, copper, and lead. Adjustable Inlet: The trap features an adjustable inlet, making it suitable for a wide range of domestic repair, maintenance, and improvement projects. Material and Standards Compliance: Manufactured from durable polypropylene, the SC10 conforms to BS EN 274-1:2002 standards, ensuring reliability and longevity.
1½" SD10 Tubular Swivel 'S' Trap
The McAlpine 1½" SD10 Tubular Swivel 'S' Trap is a high-quality plumbing component designed for use in domestic and commercial drainage systems. It features a tubular design with a swivel inlet that allows for flexible installation, making it suitable for connecting to sinks, basins, and other waste outlets. Key Features: Size: 1½" (38mm) Type: Tubular ‘S’ Trap Swivel Inlet: Provides installation flexibility Material: Durable polypropylene construction Water Seal: 75mm to prevent odours from escaping Standards: Conforms to BS EN 274
1½" T28M Multifit Straight Connector
The 1½" T28M Multifit Straight Connector is a versatile plumbing fitting designed to join two lengths of waste pipe. Its "Multifit" technology is the standout feature, making it a "get out of jail free" card for installers dealing with mismatched pipe materials. Key Features Multifit Universal Connection: Unlike standard solvent-weld fittings, the internal compression seal is designed to fit all 40mm (1½") plastic waste pipes (BS EN 1451-1:2000 and BS EN 1329-1:2000).This includes: Polypropylene (Push-fit) ABS (Solvent weld) PVC-u (Solvent weld) Straight Coupling: Designed for a linear connection, allowing you to extend a run of pipe or repair a broken section without changing direction. Mechanical Seal: Features a rubber "O" ring and a plastic friction washer that creates a watertight seal simply by tightening the threaded cap.No glue or heat is required. T28M Standard: This specific model is part of a professional-grade range (often associated with brands like McAlpine) known for high temperature resistance and durability against household chemicals.
1½" T29 Straight Connector - Multifit x BSP Female thread
Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2000 and BS EN 1329-1:2000, copper pipe and lead pipe Manufactured in Polypropylene
1½" TP10 Tubular Swivel All One Trap
The McAlpine 1½" TP10 Tubular Swivel All One Trap is a versatile plumbing component designed to efficiently manage waste water in sinks, basins, and baths. Key features include: 75mm Water Seal: Prevents the ingress of sewer gases into the living space. Multifit Compression Outlet: Compatible with plastic, copper, and lead pipes, offering flexibility during installation. Adjustable Inlet: Accommodates various installation scenarios, making it suitable for domestic repairs, maintenance, and improvements. Swivel Outlet: Can be positioned in 'P', 'S', or 'Q' configurations to meet specific plumbing requirements. Material: Constructed from durable polypropylene for longevity. Compliance: Meets the standards set by BS EN 274-1:2002.
1½" V1M Multifit Swept Tee Waste Fitting
The 1½" V1M Multifit Swept Tee is a high-performance plumbing essential designed for seamless waste water management. Engineered for versatility, this "Multifit" connector is a lifesaver for both professional installers and DIYers, as it bridges the gap between different pipe materials and slightly varying diameters. Key Features & Benefits Multifit Technology: The universal compression nut and seal allow this fitting to connect to Plastic (ABS and PVC), Copper, and Lead pipes without needing specialized adapters. Swept Internal Geometry: The gentle radius promotes a "swept" flow, reducing turbulence and preventing debris buildup at the junction. Durable Construction: Manufactured from high-grade polypropylene, it is resistant to household chemicals and high water temperatures. Easy Installation: Features a hand-tighten compression nut—no solvent welding or heavy machinery required. Ideal for tight spaces under sinks or behind appliances.
1½" WM11 P Sink Trap with Twin 135° Domestic Appliance Nozzle
The 1½" WM11 P Sink Trap with Twin 135° Domestic Appliance Nozzle is a plumbing component designed for use in kitchen sinks. It serves as a waste trap that prevents foul odors from escaping the drainage system while allowing wastewater to flow efficiently. Key Features: Size: 1½" (38mm) connection Type: P-Trap – retains a water seal to prevent sewer gases from entering the home Material: Typically made of durable plastic (polypropylene or ABS) Nozzles: Twin 135° angled connections for domestic appliances (e.g., washing machines, dishwashers) Easy Installation: Designed for quick and secure fitting under kitchen sinks Compliance: Meets standard plumbing regulations
1½" WM2 Sink P Trap with Horizontal Domestic Appliance Nozzle
The McAlpine 1½" WM2 Sink P Trap is a 75mm water seal tubular swivel 'P' trap designed for kitchen sinks and domestic appliances. It features a 1½" multifit compression outlet that accommodates plastic, copper, and lead pipes, ensuring versatile compatibility. Additionally, it includes an inlet connection suitable for discharges from washing or dishwashing machines. Manufactured from durable polypropylene, the trap conforms to EN 274-1:2002 standards, ensuring quality and reliability.
The McAlpine 1½" WMF3 Straight Nozzle is a plumbing component designed to facilitate the connection of washing machines or dishwashers to a waste system. Manufactured from durable polypropylene, this white nozzle features a push-fit design for easy installation. It connects to a 1½" Multifit fitting, accommodating various pipe materials such as plastic, copper, and lead. The nozzle can accept discharge from washing or dishwashing machines, making it suitable for residential properties. Straight Nozzle for connection to Multifit Nozzle will connect to 1½" Multifit Can accept discharge from a washing or dishwashing machine Manufactured in polypropylene
1½" x 1½" x ¾" V33L Washing Machine Surefit Swept Tee with Domestic Appliance Nozzle
This product is a specialized plumbing fitting designed to integrate a washing machine or dishwasher waste pipe into a standard household drainage system. The "swept" design is the key feature here, as it uses a smooth curve rather than a sharp angle to promote better water flow and prevent blockages. Technical Specifications Feature Detail Dimensions 1½" x 1½" x ¾" Type Swept Tee (Curved junction) Model V33L Surefit Inlet Integrated Domestic Appliance Nozzle Compatibility Standard UK/European 40mm (1½") waste pipes Key Features Surefit Technology: Designed for a secure, leak-proof connection that is easy to install without requiring specialized tools or heavy adhesives in most manual configurations.Swept Design: The internal curve (the "sweep") directs the flow of water in the direction of the main waste pipe. This reduces turbulence and prevents the "back-up" of gray water. Domestic Appliance Nozzle: The ¾" auxiliary branch is specifically sized to accept the flexible corrugated discharge hose from a washing machine or dishwasher Durable Construction: Usually manufactured from high-grade polypropylene or ABS plastic, making it resistant to high water temperatures and common household detergents. Gemini said
1½" x 1¼" T12M Multifit Reducer
This product is a multifit compression reducer, a specialized plumbing fitting used to connect two pipes of different diameters. It is particularly valued for its versatility in repair and renovation work. Key Features No Solvent Required: The mechanical compression seal means you don't need glue or heat, making it ideal for tight spaces or wet environments where solvent won't set. Adaptability: It is designed to handle slight variations in the outside diameter (OD) of pipes, which is common when dealing with older plumbing systems versus modern metric standards. Durable Material: Typically made from high-grade white polypropylene, which is resistant to domestic chemicals and hot water temperatures.
1¼" ASA10 Adjustable Inlet Tubular Swivel 'P' Trap
The McAlpine 1¼" ASA10 Adjustable Inlet Tubular Swivel 'P' Trap is a plumbing component designed to prevent sewer gases from entering a building through the drainage system. It features a 75mm water seal and an adjustable inlet, making it suitable for various domestic repair, maintenance, and improvement tasks. The trap is manufactured in polypropylene and conforms to BS EN 274-1:2002 standards. Key Features: 75mm Water Seal: Prevents odors from passing back into the building by creating a barrier of water between the inside of the trap and the outside air. Adjustable Inlet: Allows for easy installation and alignment with the waste pipe, accommodating various plumbing configurations. Multifit Compression Outlet: Suits all plastic, copper, and lead pipes, providing versatility in connections. Manufactured in Polypropylene: Ensures durability and resistance to corrosion. Conforms to BS EN 274-1:2002: Meets established standards for quality and performance.
1¼" FLEXCON1 Flexible Connector - Universal x Plain Spigot
This product is a versatile plumbing component designed to bridge the gap between mismatched or misaligned pipes. The 1¼" FLEXCON1 is specifically engineered for flexibility, making it an ideal solution for tight spaces where rigid piping won't fit. Key Specifications Size: 1¼" (Standard size for many basin and sink wastes). Connection Type: Universal x Plain Spigot. Material: High-quality flexible plastic/polypropylene, designed to withstand standard domestic water temperatures and chemicals.
1¼" MS20 135° Multifit Bend Waste Fitting
The 1¼" MS20 135° Multifit Bend is a versatile plumbing essential designed for professional and DIY drainage installations. Its "Multifit" technology makes it a problem-solver for mismatched pipe types, ensuring a watertight seal even when connecting different materials. Key Features & Benefits Universal Compatibility: The Multifit connection is designed to work seamlessly with Push-fit, Solvent Weld, and Copper pipes. Precision Angle: The 135° bend (also known as a 45° elbow) provides a gentle change in direction, which helps maintain optimal flow and reduces the risk of blockages compared to sharp 90° turns. Durable Construction: Manufactured from high-grade polypropylene, it is resistant to most household chemicals and high-temperature waste water. Leak-Proof Seal: Features a captive seal and internal "O" ring that grips the pipe securely, allowing for expansion and contraction without compromising the joint.
1¼" MS4 90° Multifit Bend Waste Fitting
Whether you’re a professional plumber or a DIYer tackling a bathroom renovation, the 1¼" MS4 90° Multifit Bend is the "Swiss Army Knife" of waste fittings. Designed for maximum versatility, it eliminates the headache of mismatched pipes by providing a secure, leak-proof connection across various materials. Key Features 1. Universal Compatibility The "Multifit" technology is the standout feature here. This fitting is designed to connect to: Plastic pipes (Push-fit or Solvent Weld) Copper pipes Lead pipes 2. Secure Seal It utilizes a multi-layered compression system, typically featuring: An internal friction washer A polyethylene compression ring A rubber 'O' ring This combination ensures that even if your pipe is slightly out of shape or scratched, you get a watertight seal without the need for messy solvent cement. 3. Space-Saving 90° Design The sharp elbow is perfect for tight spots under sinks or behind pedestals where you need to redirect wastewater flow quickly and efficiently.
1¼" S28M Multifit Straight Connector
The 1¼" S28M Multifit Straight Connector is a versatile plumbing component designed to bridge the gap between different piping materials and sizes. It is widely used in domestic and commercial waste systems due to its "universal" compression technology. Core Specifications Size: 1¼ inch (Standard for washbasin waste). Type: Straight Coupling / Connector. Fitting: Multifit (Universal Compression. Material: High-grade Polypropylene (usually white). Key Features Universal Compatibility: The "Multifit" design features a unique internal seal and nut arrangement. This allows it to connect to: Plastic pipes (BS EN 1451-1 / BS EN 1329-1). Copper pipes (BS EN 1057). Lead pipes. Watertight Seal: It utilizes a rubber cone and a friction washer to create a secure, leak-proof joint without the need for solvent cement.Ease of Installation: No special tools are required. The hand-tightened compression nut makes it ideal for tight spaces under sinks or for quick repair Durability: Made from robust polypropylene, it is resistant to most household chemicals and high-temperature waste discharge
1¼" SA10 Tubular Swivel 'P' Trap
The McAlpine 1¼" SA10 Tubular Swivel 'P' Trap is a plumbing component designed to connect sinks and basins to drainage systems. It features a 75mm water seal, effectively preventing sewer gases from entering the living space. The trap includes a 1¼" Multifit compression outlet, accommodating plastic, copper, and lead pipes. Manufactured from durable polypropylene, it conforms to BS EN 274-1:2002 standards.
1¼" SB10 Tubular Swivel 'S' Trap
A 1¼" SB10 Tubular Swivel 'S' Trap is a type of plumbing trap used in waste drainage systems to prevent sewer gases from entering a building while allowing wastewater to flow efficiently. Here’s a breakdown of its key features: Description: Size: 1¼ inches (32mm) Type: 'S' Trap (forms an "S" shape to maintain a water seal) Material: Typically made from brass, stainless steel, or high-quality plastic Swivel Feature: Adjustable inlet/outlet positioning for ease of installation Application: Commonly used for basin and sink waste connections SB10: Likely refers to the model or standard specification
1¼" V8M Multifit Swept Tee Waste Fitting
The 1¼" V8M Multifit Swept Tee is a high-performance waste pipe fitting designed for maximum flow efficiency and installation flexibility. Unlike standard hard-angled tees, the "swept" design features a smooth, curved internal radius that significantly reduces the risk of blockages and improves the transition of wastewater. Key Features Swept Internal Radius: The gentle curve (rather than a 90° sharp turn) minimizes turbulence and prevents debris buildup, ensuring a self-cleaning flow. Multifit Technology: Engineered with a universal compression connection, this fitting is compatible with various pipe materials, including: Push-fit plastic. Solvent weld plastic Copper pipe Leak-Proof Seals: Features high-quality rubber washers and a robust locking nut system to ensure a watertight seal even under thermal expansion. Durable Construction: Manufactured from high-grade polypropylene, making it resistant to boiling water and most household chemicals.
Fixing Hole Dimensions - 242mm x 86mm Overall Dimensions - 260mm x 194mm Equivalent Area - 7600mm² Timloc Product Code - 1207W
1211WF 9 x 6" Louvre Vent with Flyscreen
Fixing Hole Dimensions - 242mm x 152mm Overall Dimensions - 260mm x 170mm Equivalent Area - 7150mm² Timloc Product Code - 1211WF
The largest butane cylinder in our range. Ideal for indoor portable heaters and indoor cooking. Requires a 21mm Clip on Regulator. This gas cylinder is filled with 13kg of butane gas. - 32 hours of cooking with two burners - 43 hours of heating with one burner Please note: This is for a refill only. If you require a new bottle and don't have one to swap, an additional fee of £47.23 inc VAT will occur.
15mm Brass Compression Gate Valve
A 15mm Brass Compression Gate Valve is a type of valve commonly used in plumbing and fluid control systems. It is designed to regulate the flow of liquids or gases through pipes. Here are some key features of this valve: Material: Made of brass, a durable and corrosion-resistant material, which ensures long-lasting performance and reliability. Size: The "15mm" refers to the valve’s nominal size, meaning it is intended for use with 15mm diameter pipes. Compression Fittings: This valve uses compression fittings to connect to the pipe. It does not require soldering or threading, making it easy to install. Gate Valve: The gate mechanism inside the valve controls the flow by lifting or lowering a gate to either open or close the flow passage. It provides a full-flow design with minimal pressure drop when fully open. Use: Typically used in residential and commercial plumbing applications to control water flow in a system. The gate valve design is ideal for on/off control, though it is not typically used for throttling or regulating the flow in between fully open or closed positions.
A 15mm Brass Double Check Valve is a plumbing safety device designed to prevent backflow and contamination in water systems. It consists of two internal check valves that allow water to flow in one direction while stopping any reverse flow. Key Features: Material: Durable brass construction for corrosion resistance and longevity. Size: 15mm (½ inch) connection, suitable for standard plumbing systems. Double Check Mechanism: Provides two layers of protection against backflow. Application: Ideal for potable water systems, irrigation, heating systems, and general plumbing applications. Installation: Compact and easy to install in horizontal or vertical pipework. This valve ensures compliance with water regulations, making it essential for protecting drinking water from contamination.
15mm Chrome Plated Trent Radiator Valve
The 15mm Chrome Plated Trent Radiator Valve is a high-quality valve designed for use with central heating systems, offering an elegant and durable solution for controlling the flow of water to radiators. Made from durable materials and finished with a sleek chrome plating, it provides both functionality and aesthetic appeal. Here are the key features: Size: 15mm, ideal for most standard pipe connections. Material: Chrome-plated finish for a shiny, modern appearance that resists corrosion and tarnishing. Functionality: Allows for precise control of water flow into radiators, ensuring better temperature regulation. Compatibility: Suitable for use with most radiators and central heating systems. Durability: Built to last, offering long-term reliability and performance. This valve is perfect for homeowners or plumbers looking to enhance the performance of a heating system while maintaining a stylish look.
A 15mm compression ring is a small mechanical component used primarily in plumbing and HVAC systems. It is designed to be used with compression fittings, which are commonly found in copper, aluminum, and sometimes plastic tubing. The compression ring, also known as a ferrule, is placed around the pipe and is compressed tightly when the compression nut is tightened. This creates a watertight or airtight seal, preventing leaks. In plumbing, a 15mm compression ring is typically used in systems that require a secure connection between two pieces of tubing, ensuring no fluid or gas escapes from the joint. The 15mm measurement refers to the diameter of the pipe the fitting is intended for, which in this case is 15 millimeters. Compression rings are often used in situations where the connection needs to be durable and resistant to movement, vibration, or pressure. They're easy to install and are reusable in some cases, making them a popular choice for both professionals and DIYers.
A 15mm Compression Stop End is a plumbing fitting used to cap off the end of a 15mm pipe. It is commonly used in domestic and commercial plumbing systems to seal unused pipe ends temporarily or permanently without the need for soldering or specialized tools. Key Features: Size: 15mm (compatible with standard 15mm copper or plastic pipes) Type: Compression fitting (tightened using a wrench, no soldering required) Material: Usually brass for durability and corrosion resistance Usage: Ideal for sealing off pipework in plumbing repairs, modifications, or extensions Installation: Simple and tool-friendly; requires only a spanner to tighten
A 15mm Compression Stopcock is a plumbing valve used to control the flow of water in a pipeline. It features compression fittings, which allow for easy installation without the need for soldering. Key Features: Size: 15mm (fits standard 15mm pipework) Material: Typically made from brass for durability and corrosion resistance Connection Type: Compression fittings for secure, leak-proof installation Function: Allows for manual control of water flow, typically used for maintenance, isolation, or emergency shut-off Application: Commonly used in domestic and commercial plumbing systems for cold and hot water supply
A 15mm Compression Tee is a type of plumbing fitting used to connect three sections of pipe, typically in domestic and commercial water systems. It has three outlets arranged in a "T" shape, allowing the flow of water to be split or redirected. Key Features: Size: 15mm diameter, suitable for standard copper, plastic, or stainless steel pipes. Material: Typically made from brass for durability and corrosion resistance. Compression Fittings: Uses compression nuts and olives (ferrules) to create a watertight seal without the need for soldering or special tools. Versatile Application: Commonly used in hot and cold water supply, heating systems, and certain gas applications (if specified). Easy Installation & Maintenance: Can be installed with a spanner and does not require heat or adhesives.
15mm Solder Ring Bent Tap Connector
A 15mm Solder Ring Bent Tap Connector is a plumbing fitting used to connect a 15mm copper pipe to a tap or similar outlet. It features a pre-soldered ring inside the fitting, which simplifies installation by allowing for a secure and leak-free joint when heat is applied. Key Features: Pre-soldered joint: Ensures a strong and reliable connection with minimal effort. Bent (angled) design: Ideal for connecting taps where a straight connector isn’t suitable. 15mm size: Standard for domestic and commercial plumbing systems using copper pipes. Easy installation: Just apply heat to melt the solder and create a watertight seal. Durable material: Typically made from high-quality brass or copper for longevity and corrosion resistance.
A 15mm Solder Ring Equal Tee is a type of copper plumbing fitting used to create a T-shaped connection between three equal-sized copper pipes, typically in domestic and commercial water or heating systems. Features & Description: Material: Made from high-quality copper for durability and corrosion resistance. Size: 15mm diameter for all three outlets, ensuring a uniform connection. Solder Ring: Preloaded with a ring of solder inside the fitting for easy, reliable, and leak-free jointing. Application: Used in hot and cold water supply systems, heating systems, and other plumbing installations. Installation: Requires heat (blowtorch) to melt the solder, securing the joint when used with flux.
A 15mm solder ring stop end is a plumbing fitting designed to cap off a 15mm copper pipe. It features a solder ring (a small ring of solder embedded within the fitting) that, when heated, melts to create a strong, leak-proof seal. These stop ends are commonly used in plumbing installations to block the flow of water at the end of a pipe or to temporarily seal off a section of a plumbing system during construction or repairs. The 15mm size indicates that it fits 15mm diameter copper pipes, making it a standard fitting for residential and commercial plumbing systems. It’s essential to use a blowtorch or heat source to melt the solder ring properly and ensure a tight, durable seal. The fitting typically has a cup shape that fits over the end of the pipe, with the solder ring positioned inside the cup.
15mm Solder Ring Straight Coupling
A 15mm Solder Ring Straight Coupling is a type of plumbing fitting used to connect two 15mm copper pipes in a straight line. It features an integrated solder ring, which contains a pre-applied ring of solder inside the fitting. When heated with a blowtorch, the solder melts and forms a secure, watertight joint between the pipes. Key Features: Material: Typically made from high-quality copper or brass for durability and corrosion resistance. Size: Designed for 15mm diameter copper pipes. Solder Ring: Contains a built-in ring of solder for quick and easy installation. Application: Suitable for domestic and commercial plumbing, including hot and cold water systems and central heating. Installation: Requires cleaning and flux application on the pipe ends before heating to ensure a strong bond. Reliable Connection: Offers a permanent, leak-proof joint when correctly installed.
15mm Solder Ring Straight Tap Connector
A 15mm Solder Ring Straight Tap Connector is a type of plumbing fitting designed to connect a 15mm pipe directly to a tap or appliance. It features a pre-soldered ring inside the fitting, allowing for a secure and leak-proof joint when heat is applied. Key Features: Material: Usually made of copper for durability and corrosion resistance. Size: 15mm pipe connection. Type: Solder ring (also known as capillary fitting) with pre-applied solder for ease of installation. Design: Straight connector, ideal for inline connections to taps or appliances. Application: Suitable for hot and cold water systems in domestic and commercial plumbing.
15mm Straight Compression Coupling
A 15mm Straight Compression Coupling is a plumbing fitting designed to join two 15mm pipes in a straight line using a compression mechanism. It consists of a central body with compression nuts and olives (ferrules) at each end. When the nuts are tightened, the olives compress around the pipe, creating a watertight seal without the need for soldering or special tools. Key Features: Material: Typically made from brass for durability and corrosion resistance. Size: Fits 15mm diameter pipes. Connection Type: Compression fitting – requires only a spanner for installation. Usage: Suitable for copper, plastic (with inserts), and stainless steel pipes. Applications: Commonly used in domestic and commercial plumbing for water supply systems. Reusable: Can be disassembled and reassembled if needed.
15mm x 1/2" Brass Compression Straight Tap Connector
A 15mm x 1/2" Brass Compression Straight Tap Connector is a plumbing fitting designed to connect a 15mm copper or plastic pipe to a 1/2" BSP (British Standard Pipe) threaded connection, commonly found on taps or valves. Key Features: Material: Durable brass construction for corrosion resistance and longevity. Size: 15mm compression end × 1/2" BSP male or female threaded end. Compression Fitting: No need for soldering; provides a secure, watertight seal using an olive and compression nut. Application: Ideal for connecting taps, flexible hoses, or plumbing fixtures in kitchen, bathroom, and outdoor installations. Compatibility: Suitable for use with copper, plastic, or stainless steel pipes (with appropriate pipe inserts for plastic).
15mm x 1/2" Brass Female Compression Coupling
A 15mm x 1/2" Brass Female Compression Coupling is a plumbing fitting designed to connect two pipes or tubes together. It has two female ends that fit onto the outside of pipes, creating a secure, leak-proof connection. Here's a breakdown of its features: Material: Brass, known for its durability, resistance to corrosion, and ability to withstand high pressure. Size: One side is for 15mm pipe (often used in water supply systems), and the other side is for a 1/2-inch pipe, typically used in imperial measurement systems. Compression Fit: The coupling uses compression technology, where a ferrule (or ring) is squeezed tightly around the pipe as the nut is tightened. This creates a watertight seal without the need for soldering or welding. Application: Commonly used in domestic plumbing for connecting copper, plastic, or steel pipes in both water and gas supply systems.
15mm x 1/2" Male Compression Elbow
A 15mm x 1/2" Male Compression Elbow is a plumbing fitting used to connect two pieces of pipe or tubing at a 90-degree angle, often in water or gas supply systems. Here's a breakdown of its components: 15mm: This refers to the outside diameter of the pipe or tube that fits into the compression fitting, typically used for small-scale plumbing applications. 1/2" Male: The male part refers to a threaded connection, meaning the fitting has an external thread that can screw into a corresponding female threaded fitting or component (like a tap or valve). Compression: This indicates that the fitting uses a compression seal to create a watertight or airtight connection. A compression nut and ring (olive) are used to tightly grip the pipe or tube to prevent leaks. Elbow: The fitting is shaped like an "L," designed to change the direction of the pipe at a 90-degree angle. These fittings are commonly used in domestic plumbing systems, especially when connecting copper, plastic, or PEX piping to fixtures, taps, or valves. They offer a reliable and easy-to-install solution for tight spaces and applications requiring angled pipe routes.
15mm x ½" Brass Wall Plate Elbow
A 15mm to ½" Brass Wall Plate Elbow is a plumbing fitting designed to connect two pipes of different sizes — specifically 15mm and ½ inch. It is typically made of high-quality brass for durability, corrosion resistance, and aesthetic appeal. This fitting has a wall plate that helps to secure the elbow to a wall or surface, providing stability and support. Key features: Material: Brass, known for its strength, resistance to corrosion, and longevity. Size Compatibility: Designed to transition between a 15mm pipe (standard in Europe and some other regions) and a ½ inch pipe (commonly used in other plumbing systems). Wall Plate: A flat, round plate attached to the elbow, allowing the fitting to be mounted to a wall or surface for added stability and security. Function: Often used in water systems, heating systems, or other plumbing applications to make a 90-degree turn while transitioning between different pipe sizes. This fitting is perfect for when you need to change direction in a plumbing line and move from a smaller pipe to a slightly larger one while maintaining a clean, secure connection.
15x10mm Solder Ring Reducing Coupler
A 15x10mm Solder Ring Reducing Coupler is a type of plumbing fitting used to connect two pipes of different diameters—specifically, a 15mm pipe and a 10mm pipe. It is designed with a solder ring inside the coupler, which melts when heated, forming a strong, leak-proof joint between the pipes. Here’s a breakdown of its features: Size: The coupler has a 15mm diameter on one side and a 10mm diameter on the other, allowing for a smooth transition between pipes of different sizes. Solder Ring: Inside the coupler is a ring of solder that melts during the soldering process. The heat causes the solder to flow into the joint, providing a secure, water-tight seal. Material: Typically made from copper, ensuring durability and resistance to corrosion in water or heating systems. Application: Ideal for use in domestic and commercial plumbing systems, especially where a connection between different pipe sizes is required, such as in central heating installations, water supply lines, and other plumbing applications. Ease of Use: The solder ring simplifies the soldering process, as the user doesn't need to apply flux separately to the joint—just heat the fitting, and the solder ring does the rest.
15x12mm Straight Compression Coupling
A 15x12mm Straight Compression Coupling is a type of plumbing fitting used to connect two pipes of different sizes. Specifically, it connects a 15mm pipe to a 12mm pipe in a straight line. It typically features a compression mechanism, meaning that the coupling tightens around the pipe when a compression nut and olive (or ferrule) are tightened, creating a secure seal without the need for soldering or adhesives. This type of coupling is often used in systems involving water or gas supply lines, including domestic plumbing or heating systems, and it is designed to provide a reliable, leak-free connection. Compression couplings are usually made of durable materials such as brass or stainless steel, ensuring longevity and resistance to corrosion.
Versatile, efficient and easily exchangeable, our propane gas cylinder is the perfect solution for your commercial or domestic gas needs. Each cylinder contains 19kg of propane gas, providing you with an ample supply for your activities. The 19kg propane cylinder is incredibly versatile, it's a great option for mobile catering, caravans, river boats and large commercial processes such as roofing. - 47 hours of cooking with two burners - 63 hours of heating with one burner - Takes a 37mbar screw fit Regulator Please note: This is for a refill only. If you require a new bottle and don't have one to swap, an additional fee of £58.84 inc VAT will occur.
22 x 22 x 15mm Solder Ring Reduced End Tee
A 22 x 22 x 15mm Solder Ring Reduced End Tee is a type of plumbing fitting used to join three pipes in a T-shape configuration. Here’s a breakdown of its features: Material: Typically made of copper, which is common in plumbing systems due to its durability and resistance to corrosion. Size: The fitting has three connections, with two 22mm ends (for larger pipes) and one 15mm end (for a smaller pipe). Solder Ring: This fitting includes a built-in solder ring, which is a ring of solder material placed around the joint. When heated, the solder melts and creates a strong, leak-proof seal between the pipe and fitting. This eliminates the need for additional soldering material. Reduced End: The term "reduced end" refers to the smaller diameter (15mm) connection, which reduces the size of the pipe coming off the T-junction. Usage: Commonly used in plumbing systems to connect three different-sized pipes, especially when branching off from a larger pipe to a smaller one.
A 22mm brass compression ring is a small, circular component typically used in plumbing and pipe-fitting applications. Made of durable brass, this compression ring is designed to create a secure and leak-free connection between pipes and fittings. It works by compressing when a compression nut is tightened, which causes the ring to seal around the pipe, preventing fluid or gas from escaping. The 22mm size refers to the diameter of the pipe that it is designed to fit, making it suitable for 22mm pipe fittings. Brass is chosen for these rings due to its resistance to corrosion, strength, and ability to withstand high-pressure systems. This type of compression ring is commonly used for water, gas, and heating systems.
22mm Brass Compression Stopcock
A 22mm compression stopcock is a plumbing valve designed to control the flow of water in a pipeline. It features compression fittings, which allow it to be securely connected to 22mm pipes without the need for soldering. Key Features: Size: 22mm diameter Material: Made from brass for durability and corrosion resistance Compression Fittings: Uses nuts and olive rings to create a watertight seal Operation: Features a handle or lever to open/close the water flow Application: Commonly used in domestic and commercial plumbing systems to isolate water supply to specific sections
A 22mm Brass Gate Valve is a type of valve used to control the flow of liquids or gases in pipelines, typically in plumbing or industrial systems. Here's a detailed description: Material: Made from brass, a durable and corrosion-resistant alloy of copper and zinc, ensuring longevity and reliable performance even in harsh environments. Size: The valve has a 22mm diameter, which indicates the internal diameter of the pipe it is designed to fit. This size is commonly used in residential plumbing systems. Design: It features a gate mechanism, meaning that the valve uses a flat disc or gate that moves up and down to regulate the flow. When fully opened, the gate valve provides a clear passage for fluids, while closing the valve raises the gate to block the flow. Function: Gate valves are primarily used for fully opening or closing the flow of water, oil, or gas in a pipe. They are typically not used for flow regulation or throttling, as they are designed for fully open or fully closed positions. Applications: Often found in water supply lines, heating systems, industrial equipment, and irrigation systems.
A 22mm Compression Elbow is a plumbing fitting used to connect two pipes at a 90-degree angle. It features compression fittings on both ends, allowing for a secure and leak-proof joint without the need for soldering or welding. This type of fitting is commonly used in domestic and commercial plumbing systems for connecting copper, plastic, or stainless-steel pipes. Key Features: Size: 22mm diameter Material: Typically made of brass for durability and corrosion resistance Connection Type: Compression fittings (requires a compression nut and olive for installation) Usage: Suitable for water and heating systems Installation: No special tools needed—only a wrench to tighten the compression nuts
A 22mm Compression Equal Tee is a type of plumbing fitting used to connect three pipes of equal diameter (22mm) in a T-shaped configuration. It is commonly used in domestic and commercial plumbing systems for distributing water or other fluids. Key Features: Material: Typically made of brass or copper for durability and corrosion resistance. Connection Type: Compression fittings, which do not require soldering or welding. Size: Designed to fit 22mm diameter pipes on all three ends. Usage: Suitable for both hot and cold water systems, central heating, and other plumbing applications. Installation: Requires compression olives and nuts, which tighten around the pipe to create a secure, leak-free joint. Reusability: Can be disassembled and reused, making it a flexible option for plumbing work.
A 22mm Compression Stop End is a plumbing fitting used to cap off the end of a 22mm pipe securely. It is commonly used in water and heating systems to seal off unused pipe ends, either permanently or temporarily. Key Features: Material: Typically made of brass for durability and corrosion resistance. Some versions may have a chrome finish. Size: Designed for 22mm diameter pipes. Compression Fitting: No soldering required—tightened with a wrench for a secure fit. Reusable: Can be removed and reused if needed. Application: Used in domestic and commercial plumbing to terminate pipework safely.
22mm Compression Straight Coupling
A 22mm Compression Straight Coupling is a plumbing fitting used to connect two pipes of equal diameter (22mm) in a straight line. It utilizes compression fittings, which create a watertight seal without the need for soldering or welding. These couplings are commonly used in domestic and commercial plumbing systems for water, gas, and heating applications. Key Features: Material: Typically made from brass for durability and corrosion resistance. Size: Designed for 22mm pipe connections. Connection Type: Compression fittings with nuts and olive rings (ferrules). Installation: No special tools required; just tighten with a wrench. Usage: Suitable for copper, plastic, and sometimes stainless steel pipes (with appropriate inserts). Pressure Rating: Generally suitable for standard domestic water and heating systems.
A 22mm Solder Ring 90° Bend is a pre-soldered copper pipe fitting designed to create a 90-degree change in direction in a 22mm copper plumbing system. It features an integral ring of solder inside the fitting, which melts when heat is applied, ensuring a secure and reliable joint without the need for additional solder. Key Features: Size: 22mm diameter Material: Copper Type: Solder Ring (Pre-Soldered) Angle: 90° Bend (Elbow) Application: Used in hot and cold water plumbing, central heating systems, and other copper pipe installations Installation: Requires heating with a blowtorch to melt the pre-applied solder for a watertight seal Standards: Typically conforms to relevant plumbing and building regulations
A 22mm Solder Ring Equal Tee is a type of plumbing fitting used to connect three copper pipes of equal diameter (22mm) in a T-shape. It features built-in solder within the fitting, which simplifies the soldering process by eliminating the need for additional solder application. When heated with a blowtorch, the solder melts and creates a secure, leak-proof joint. Key Features: Material: Typically made of high-quality copper or brass. Size: Designed for use with 22mm copper pipes. Solder Ring: Preloaded with solder for ease of installation. Equal Tee Design: Ensures a balanced and even flow between three connected pipes. Usage: Ideal for hot and cold water systems, central heating, and general plumbing applications. Installation: Requires flux and heat application for a strong, durable joint.
A 22mm Solder Ring Stop End is a type of plumbing fitting used to cap off the end of a 22mm copper pipe. It features an integrated ring of solder inside the fitting, which simplifies installation. When heat is applied, the solder melts and creates a secure, watertight joint. Key Features: Material: Typically made from high-quality copper or brass for durability and corrosion resistance. Size: Designed for 22mm copper pipes. Integrated Solder Ring: Pre-loaded with solder to ensure a reliable connection with minimal effort. Application: Ideal for sealing off unused pipe ends in plumbing and heating systems. Installation: Requires a heat source (such as a blowtorch) and flux for activation. This fitting is commonly used in domestic and commercial plumbing systems where a clean and professional finish is required.
22mm Solder Ring Straight Coupling
A 22mm Solder Ring Straight Coupling is a plumbing fitting used to connect two 22mm copper pipes in a straight line. It features an integral solder ring containing a pre-applied ring of solder, which simplifies the joining process. Key Features: Material: Typically made of high-quality copper or brass for durability and corrosion resistance. Size: 22mm diameter, suitable for 22mm copper pipes. Pre-Soldered Ring: Contains a pre-applied solder ring inside the fitting, eliminating the need for separate solder application. Application: Used in hot and cold water systems, central heating installations, and gas applications (depending on certification). Installation: Requires heat application (blowtorch) to melt the solder and create a secure, leak-free joint.
22mm x 1" Brass Male Compression Elbow
A 22mm x 1" Brass Male Compression Elbow is a plumbing fitting designed to connect a 22mm copper or plastic pipe to a 1-inch female-threaded pipe or fitting at a 90-degree angle. It consists of: Material: High-quality brass for durability and corrosion resistance. Connection Type: One end features a 22mm compression fitting (secured using a compression nut and olive), while the other end has a 1-inch male threaded connection. Usage: Suitable for hot and cold water systems, central heating, and some gas applications (check regulations). Benefits: Provides a secure, leak-resistant connection without requiring soldering or heat.
22mm x 15mm Solder Ring Reducer
A 22mm x 15mm Solder Ring Reducer is a type of plumbing fitting used to connect two pipes of different diameters—specifically a 22mm pipe to a 15mm pipe. The reducer has a solder ring (a small ring of solder material) built into the fitting that, when heated, melts and creates a strong, leak-proof seal between the pipe and the fitting. These fittings are commonly used in copper piping systems for water, heating, and gas installations, offering a reliable and efficient way to join pipes of varying sizes. The solder ring ensures a consistent and durable bond, eliminating the need for additional sealing materials. Key features: Material: made of copper, which ais corrosion-resistant and suitable for plumbing systems. Size: 22mm on one side, 15mm on the other side, for reducing pipe size. Solder Ring: Pre-installed solder ring simplifies the installation process, requiring only heat to melt and bond the pipe to the fitting. Applications: Ideal for plumbing systems, heating installations, and other applications where pipe size reduction is necessary.
22mm x 3/4" Bras Wall Plate Adapter
A 22mm x 3/4" Brass Wall Plate Adapter is a fitting used to connect two plumbing components with different thread sizes, typically found in water or gas supply systems. Here's a breakdown of the components: 22mm: Refers to the outside diameter of a pipe or fitting, often used in European plumbing systems. This is typically the size of the pipe that will be inserted into the adapter. 3/4": Refers to the size of the thread on the other side of the adapter, which is common in plumbing fittings in North America. This side typically connects to other threaded components or pipes with a 3/4" BSP (British Standard Pipe) or NPT (National Pipe Thread) fitting. Brass: The material used for the adapter, which is durable, corrosion-resistant, and commonly used in plumbing due to its strength and longevity. Wall Plate: This indicates that the adapter is used to secure and connect plumbing fixtures to a wall, providing a stable base for attaching components like faucets or showerheads. This type of adapter is often used when transitioning between different pipe standards or for connecting plumbing systems with varying thread sizes
22mm x 3/4" Brass Female Compression Coupling
The 22mm x 3/4" Brass Female Compression Coupling is a high-quality, versatile plumbing fitting designed to connect a 22mm copper pipe directly to a 3/4" male threaded component. This fitting is a staple for both professional plumbers and DIY enthusiasts, offering a secure, leak-proof joint without the need for heat, solder, or specialized tools.
22mm x 3/4" Brass Male Compression Elbow
A 22mm x 3/4" Brass Male Compression Elbow is a plumbing fitting designed to connect two pipes at a 90-degree angle while ensuring a tight, leak-free connection. It features: Material: Made from durable, corrosion-resistant brass, which is ideal for both hot and cold water systems. Size: One side of the fitting is 22mm in diameter, while the other side is 3/4 inch, allowing it to connect pipes with different size specifications. Male Compression: The male thread on one side fits into a female compression fitting, ensuring a secure and reliable joint. Compression Fitting: This type of fitting uses a compression ring (or olive) to create a seal, making it easy to install without the need for welding or soldering. Applications: Typically used in plumbing, heating, and irrigation systems for connecting pipes that need to change direction at a 90-degree angle. This elbow fitting is ideal for connecting pipes with different sizes and angles while maintaining a strong, leak-resistant connection.
22mm x ¾" Male Brass Compression Coupling
A 22mm x ¾" Male Brass Compression Coupling is a plumbing fitting that connects two pipes with different diameters: one 22mm in diameter (usually for a metric pipe) and the other ¾ inch (common for imperial piping systems). The coupling is made of brass, known for its durability and resistance to corrosion, making it ideal for plumbing systems, particularly for water supply and heating systems. Key features of this coupling include: Compression fitting: The coupling uses a compression mechanism to form a secure connection between pipes, requiring a nut, compression ring (olive), and the coupling body. Male thread: The coupling has male threads on one end, allowing it to screw into female-threaded components, ensuring a tight, leak-proof seal. Material: Brass offers strength, resistance to corrosion, and long-lasting performance, ideal for both residential and commercial plumbing applications. Size Compatibility: The 22mm size is typically used for metric piping, while the ¾" end connects to standard imperial piping. It’s used to join different pipe systems or extend piping runs in mixed measurement systems.
22mmx15mm Compression Reducing coupling 3 Part Set
A 22mm x 15mm Compression Reducing Coupling 3-Part Set is a plumbing fitting used to join two pipes of different diameters, in this case, 22mm and 15mm. The set typically includes the following components: Compression Nut: A threaded metal nut that secures the fitting to the pipe. Compression Ring (Olive): A small, circular metal ring that creates a seal between the pipe and the fitting. Reducing Coupling: A central part of the fitting that connects the two pipes of different sizes—22mm on one end and 15mm on the other. These couplings are commonly used in both domestic and commercial plumbing systems to create secure, leak-proof connections between pipes without requiring soldering or welding. The compression method is easy to install and is suitable for copper, plastic, or brass pipes.
22x22x15mm Solder Ring Reduced Compression Tee
A 22x22x15mm Solder Ring Reduced Compression Tee is a type of plumbing fitting used to join three sections of copper pipes with different diameters. It is specifically designed for plumbing systems, where it facilitates the connection between two 22mm pipes and one 15mm pipe, forming a "T" shape. Features: Material: Typically made from high-quality copper or brass, ensuring durability and resistance to corrosion. Solder Ring: Contains a small ring of solder in the joint, which melts during the installation process to create a strong, watertight seal when heated with a blowtorch or other soldering tools. Compression: Offers a reliable, leak-free connection, typically used in systems that require secure, long-lasting fittings. Size: The dimensions refer to the outer diameters of the pipes being connected (22mm and 15mm) in the tee fitting. Application: Used in plumbing systems for water supply, heating systems, and other pipework where a reliable connection is essential.
28 x 22mm Solder Ring Reducing Coupler
A 28 x 22mm Solder Ring Reducing Coupler is a plumbing fitting used to connect two pipes of different diameters—28mm and 22mm in this case. It features a solder ring, which is a small ring of solder material placed inside the fitting. When heated, the solder melts and creates a strong, leak-proof bond between the two pipes. This coupler is typically made from copper and is used in applications where a reduction in pipe size is needed, such as in water systems, heating systems, or gas installations. Key features include: Reducing Size: Connects pipes of two different diameters (28mm to 22mm). Solder Ring: Contains a ring of solder that helps create a secure, watertight joint when heated. Material: Often made of copper, which is durable and corrosion-resistant. Applications: Common in plumbing and heating systems to reduce pipe sizes or join pipes of differing diameters. It's ideal for those who need a reliable and secure joint without the need for additional fittings.
28mm Brass compression pump Valve Gate
A 28mm Brass Compression Pump Valve Gate is a plumbing component designed for controlling the flow of liquids, typically in water or heating systems. Here’s a detailed description: Key Features: Material: Made of high-quality brass, offering excellent durability, corrosion resistance, and strength. Size: 28mm diameter, compatible with 28mm pipes in compression fittings. Valve Type: Gate valve mechanism, which allows for full flow control and minimal pressure drop when open. Connection Type: Compression fitting, ensuring a secure and leak-free connection without the need for soldering. Application: Commonly used in pump systems, heating circuits, and water supply lines where precise shut-off is required. Benefits: Reliable Shut-off: Provides a tight seal when closed, preventing leaks. Easy Installation: No special tools required for compression fittings. Long Lifespan: Brass construction ensures longevity even in high-pressure environments.
A 28mm compression equal tee is a type of fitting used in plumbing and pipe systems. It features three 28mm compression connections, allowing you to branch off a main pipe at a 90-degree angle. The "equal" part of the name means all three ports have the same size, so the tee can be used to connect three 28mm pipes. The compression fitting works by tightening a nut onto a ring (or olive) that compresses the pipe to create a secure, leak-free seal. It’s typically used with copper, plastic, or other types of pipes for fluid or gas transportation in domestic or commercial installations. These fittings are common in water, heating, and gas systems, offering reliability and ease of installation, especially when welding or soldering isn’t an option.
A 28mm Solder Ring Elbow is a plumbing fitting used to connect two pipes at a 90-degree angle, typically in a copper piping system. The elbow features a built-in solder ring inside the fitting, which simplifies the installation process by eliminating the need for additional flux and solder during the joint-making process. Key characteristics: Size: The 28mm measurement refers to the outer diameter of the pipe that fits into the elbow. Material: It is usually made of copper, which is known for its durability and resistance to corrosion. Solder Ring: The ring inside the fitting melts when heated, creating a secure bond between the elbow and the pipe, ensuring a leak-free connection. Application: Commonly used in domestic and commercial plumbing systems for water supply lines, heating systems, and other piping installations where copper pipes are employed.
28mm x 1" Brass Female Compression Coupling
A 28mm x 1" Brass Female Compression Coupling is a plumbing fitting made of brass, designed to connect two pipes of different sizes. The 28mm side is intended to fit a 28mm diameter pipe, while the 1" side fits a 1-inch diameter pipe. The coupling has female threads on both ends, allowing for easy attachment to male-threaded pipes or fittings. Typically used in plumbing and heating systems, this compression coupling is durable, resistant to corrosion, and ideal for applications requiring a secure, leak-free connection. The compression mechanism ensures a tight seal without the need for additional soldering or welding.
28mm x 1" brass Male Compression Coupling
A 28mm x 1" Brass Male Compression Coupling is a type of plumbing fitting used to connect two pipes of different sizes, in this case, a 28mm pipe (often metric) and a 1-inch pipe (imperial). The coupling is made from brass, a durable, corrosion-resistant material, making it ideal for water and gas systems. Male Compression Design: One end of the coupling is male-threaded, allowing it to be attached to a female-threaded fitting or pipe. Compression Fitting: The coupling uses compression technology, which means that it creates a tight seal by compressing a fitting (usually a ferrule or ring) around the pipe when the nut is tightened. This ensures a secure, leak-free connection. Material: Brass offers high strength, resistance to corrosion, and is commonly used in plumbing for its longevity and reliability. Usage: This type of coupling is often used in residential or commercial plumbing systems for water supply lines, heating systems, and gas piping where secure connections are crucial.
3/4" Brass Hose Union Bip Tap
A 3/4" Brass Hose Union Bib Tap is a plumbing fixture typically used for connecting a garden hose or pipe to a water supply. It features a 3/4-inch brass threaded connection, making it compatible with standard hose fittings. The union design allows for easy disconnection and reconnection, ensuring convenience when attaching or detaching hoses or pipes. The bib tap is typically made of durable brass, providing corrosion resistance and long-lasting performance, even in outdoor environments. It's commonly used in irrigation systems, outdoor faucets, and other applications requiring a hose connection.
Key Features & Benefits Precision 135° Angle: Swept 135-degree (45-degree offset) angle ensures smooth, high-capacity wastewater flow and reduces the risk of blockages. Permanent Solvent Weld Jointing: Designed for solvent weld connection, creating a strong, leak-free, permanent chemical bond with 32mm ABS and PVC waste pipes. Durable & Chemical Resistant: Manufactured from high-grade, impact-resistant plastic, formulated to withstand hot water discharges and household cleaning chemicals. Clean White Finish: Gloss white aesthetic integrates neatly with modern indoor sanitary pipework, under-sink plumbing, and exposed bathroom or utility waste runs. Fully Compliant Hardware: Tested and manufactured in accordance with relevant British and European standards for domestic and commercial waste installations.
32mm 90° Solvent Knuckle Bend (Soil & Waste) - White - W1120
Key Features & Benefits Tight 90° Directional Change: Features a compact knuckle design, allowing for sharp 90-degree turns in tight spaces like behind vanity units, kitchen cabinets, and under baths. Permanent Solvent Weld Jointing: Engineered for chemical-weld installation using solvent cement to create a permanent, leak-proof, and high-strength joint. Smooth Internal Bore: Precision-moulded interior prevents waste debris build-up and maintains optimal water flow through domestic waste systems. Durable ABS Construction: Manufactured from high-grade ABS plastic for high impact resistance, chemical protection, and long-term durability. Full Standard Compliance: Fully compliant with BS EN 1455-1 standards, ensuring full compatibility with standard 32mm solvent weld waste pipe systems.
Key Features & Benefits Optimized Swept Profile: Features a smooth, sweeping radius designed to optimize fluid dynamics, minimize flow resistance, and significantly reduce the risk of blockages. Permanent Solvent Weld Jointing: Formulated for high-integrity solvent cement welding, creating a durable, leak-proof fused joint capable of handling commercial and domestic hot water discharge. Impact-Resistant PVC-U: Manufactured from robust, lightweight unplasticized polyvinyl chloride (PVC-U) for long-term structural reliability and chemical corrosion resistance. 92.5° Fall Gradient: Pre-angled at 92.5° to maintain the essential fall needed for effective gravitational drainage across horizontal-to-vertical soil and waste connections. Clean White Finish: Clean, professional white aesthetic that matches standard indoor 32mm solvent weld waste systems for neat exposed pipework in bathrooms, kitchens, and utility rooms. Full British Standards Compliance: Fully tested and manufactured to comply with BS EN 1566 specifications for reliable trade performance.
32mm 92½° Solvent Swept Tee (Soil & Waste) - White - W1160
Key Features & Benefits Precision 135° Angle: Swept 135-degree (45-degree offset) angle ensures smooth, high-capacity wastewater flow and reduces the risk of blockages. Permanent Solvent Weld Jointing: Designed for solvent weld connection, creating a strong, leak-free, permanent chemical bond with 32mm ABS and PVC waste pipes. Durable & Chemical Resistant: Manufactured from high-grade, impact-resistant plastic, formulated to withstand hot water discharges and household cleaning chemicals. Clean White Finish: Gloss white aesthetic integrates neatly with modern indoor sanitary pipework, under-sink plumbing, and exposed bathroom or utility waste runs. Fully Compliant Hardware: Tested and manufactured in accordance with relevant British and European standards for domestic and commercial waste installations.
32mm Waste Solvent Access Plug
Key Features & Benefits Removable Threaded Cap: Features a simple screw-threaded access plug that allows quick, hassle-free inspection, clearing of blockages, and maintenance testing without dismantling pipework. Permanent Solvent Weld Joint: Spigot end connects directly into standard 32mm solvent weld waste fittings to ensure a leak-free, permanent joint under pressure. Durable ABS Construction: Manufactured from high-grade ABS material, offering high impact strength, chemical resistance, and durability against household detergents. Smooth Internal Bore: Precision-molded smooth interior prevents debris buildup and maintains optimal fluid flow throughout domestic waste systems. Standards Compliant: Fully compliant with relevant British Standards for plastic waste systems, ensuring long-term reliability for trade and DIY installations.
Key Features & Benefits Permanent Leak-Free Jointing: Designed for solvent weld fitting, creating a chemical weld between pipe and fitting for a permanent, watertight join. Smooth Internal Bore: Manufactured with a precision-molded interior to optimize flow rates and prevent debris build-up or blockages. Durable ABS/PVC Construction: Built from robust plastic materials engineered to withstand hot water discharges, domestic chemicals, and impact. Precision 135° Angle: Provides a smooth 45° direction change (135° obtuse angle) in 40mm waste pipe runs, ideal for navigating tight structural corners and offsets. Full Standard Compliance: Manufactured to British Standards for domestic and commercial soil and waste drainage systems, ensuring full compatibility with standard 40mm solvent weld waste pipe.
40mm 135° Solvent Obtuse Bend (Soil & Waste) - White - W3130
Key Features & Benefits Precision 135° Directional Change: Designed to create a smooth, low-resistance $135^\circ$ angle (obtuse bend) in 40mm waste pipe runs, reducing flow friction and preventing blockages. Solvent Weld Socket Connection: Provides a permanent, leak-proof, chemical weld joint when paired with standard solvent cement, ensuring structural stability under high fluid temperature changes. Durable uPVC Construction: Manufactured from high-grade, impact-resistant uPVC designed to handle household wastewater discharge, chemicals, and hot water flows from sinks, washing machines, and dishwashers. Clean White Finish: Gloss white finish integrates seamlessly with existing white internal soil and waste pipework, sanitary runs, and exposed plumbing installations. Full BS EN Compliance: Fully compliant with British and European standards for plastic waste discharge systems (BS EN 1566-1), ensuring building regulation compliance for internal plumbing.
40mm 135° Solvent Waste Branch
Key Features & Benefits Precision Solvent Weld Jointing: Engineeered for permanent, high-integrity chemical-weld connections, eliminating leaks in indoor waste discharge pipework. Optimal 135° Branch Angle: Designed at a 135°angle (frequently designated as a 45° tee branch) to facilitate efficient fluid flow and prevent cross-flow back-ups in multi-pipe junctions. Durable ABS/PVC Construction: Manufactured from impact-resistant, high-grade plastic to withstand high hot-water discharge temperatures and household chemicals. Smooth Internal Bore: Prevents debris build-up and maintains optimal water flow velocities throughout the waste run. Full Standard Compliance: Fully compliant with relevant UK building regulations and standard waste pipe dimensions (40mm outer diameter).
Key Features & Benefits Compact 90° Knuckle Profile: Designed with a tight-radius elbow to navigate sharp directional changes in cramped pipe runs, under sinks, or behind sanitaryware. Permanent Solvent Weld Jointing: Formulated for solvent cement welding, creating an air- and water-tight chemical bond that prevents leaks under continuous waste discharge. High-Impact ABS Construction: Manufactured from durable, high-rigidity plastic resistant to hot water, household chemicals, and mechanical strain. Smooth Internal Bore: engineered to minimize fluid friction, prevent debris build-up, and ensure continuous flow in domestic and commercial soil and waste systems. Full BS EN 1455 Compliance: Meets rigorous British and European standards for indoor wastewater, soil, and ventilated discharge installations.
40mm 90° Solvent Knuckle Bend (Soil & Waste) - White - W3120
Key Features & Benefits Compact 90° Knuckle Profile: Features a tight-radius knuckle design engineered for sharp direction changes in tight voids, behind pipe runs, and around tight sanitary installations. Solvent Weld Jointing: Creates a permanent, leak-proof chemical weld when used with standard solvent cement, ensuring structural integrity under continuous waste flow. High-Impact PVC-U Construction: Manufactured by Brett Martin from durable PVC-U for long-term resistance to household chemicals, hot water discharges, and impact. Smooth Internal Bore: Precision-molded interior prevents solids build-up and maintains optimal flow rates across waste drainage lines. Full Standards Compliance: Manufactured to relevant British and European standards for domestic and commercial soil and waste installations.
40mm 92½° Solvent Swept Tee (Soil & Waste) - White - W2160
Key Features & Benefits High-Flow Swept Design: Features a smooth 92.5° swept branch angle that guides wastewater efficiently into the main line, minimizing turbulence and reducing the risk of blockages. Solvent Weld Connection: Precision-molded triple-female socket ends create a permanent, leak-proof welded joint when bonded with standard solvent cement. Durable ABS/PVC-C Construction: Built to withstand hot water discharges, everyday household chemicals, and mechanical impact without distorting or degrading. Compact & Neat Finish: Sleek white profile matches standard 40mm waste pipework, providing a clean, professional finish for visible and concealed installations alike. Fully Compliant: Manufactured by Brett Martin in accordance with BS EN 1455-1 standards for plastic piping systems for soil and waste discharge.
40mm Solvent Pipe Bracket (Soil & Waste) - White
Key Features & Benefits Secure Support: Designed to provide robust, rigid anchorage and alignment for 40mm plastic waste pipework across domestic and commercial installations. Durable PVC Construction: Manufactured by Brett Martin using high-quality PVC that resists chemical attack, impacts, and everyday wear. Clean White Finish: Features a smooth, color-matched white finish to integrate seamlessly with matching 40mm white solvent weld waste systems. Fast Fix Installation: Pre-drilled fixing point allows quick and straightforward screw attachment to wall studs, masonry, or joists. Standards Compliant: Fully compatible with standard 40mm solvent weld waste pipes manufactured to BS EN 1566 / BS 5255 standards.
40mm Solvent Straight Connector (Soil & Waste)
Key Features & Benefits Permanent Solvent-Weld Join: Designed for solvent-weld connection to form a permanent, chemical bond that resists pressure, vibration, and thermal expansion. Precision 40mm Sizing: Fits standard 40mm (1½") plastic waste pipework across domestic plumbing, commercial installations, and renovation projects. Durable White PVCu Finish: Manufactured from high-impact PVCu with a crisp white finish that stays color-fast and matches standard sanitary pipe runs. Smooth Internal Bore: Built with a uniform, low-friction interior to prevent residue buildup, maintaining high flow rates and reducing risk of blockages. Fully Compliant Trade Quality: Engineered by Brett Martin to meet British and European standards for domestic and commercial soil and waste drainage installations.
40mm x 32mm Solvent Weld Socket Reducer
Key Features & Benefits Precision Size Reduction: Safely transitions a 40mm solvent weld waste pipe down to a 32mm pipe run within internal soil and waste systems. Solvent Weld Jointing: Creates a permanent, leak-proof welded chemical bond when applied with standard solvent cement and cleaner. High-Grade ABS/PVC Construction: Manufactured from durable, impact-resistant plastic designed to withstand hot water discharges and household chemicals. Smooth Internal Bore: Prevents snagging, debris accumulation, and blockages, maintaining optimal wastewater flow rates. Compact Socket Design: Fits neatly into standard 40mm solvent sockets, saving space behind appliances, under sinks, and within tight pipe runs.
Our 47kg cylinder is the largest cylinder size in our range. This propane bottle has a wide range of uses and it's a great option for customers who don't have the space for an LPG bulk tank. It's also perfect for commercial heating and industrial processes. This gas cylinder is filled with 47kg of propane gas. - 116 hours of cooking with two Burners - 154 hours of heating with one burner Please note: This is for a refill only. If you require a new bottle and don't have one to swap, an additional fee of £58.84 inc VAT will occur.
50mm 135° Solvent Branch (Soil & Waste) W3170
Key Features & Benefits Precision Directional Flow: Designed at a 135° angle to create a smooth, efficient swept junction for wastewater run-off, reducing the risk of blockages. High-Quality Solvent Weld Joint: Engineered for precise tolerances to form permanent, leak-proof welded joints when paired with standard solvent cement and 50mm waste pipework. Durable Construction: Manufactured from impact-resistant, high-grade plastic to withstand thermal expansion and everyday domestic and commercial effluent discharge. Fully Compliant System: Manufactured by Brett Martin to meet relevant UK building regulations and standards for internal soil and waste drainage installations. Smooth Internal Bore: Prevents sediment build-up and maintains optimal hydraulic flow performance across the waste network.
50mm 92½° Solvent Swept Tee (Soil & Waste) - White - W3160
Key Features & Benefits High-Flow Swept Radius Design: Features a curved 92.5° branch entry that guides waste fluid smoothly into the main stack, eliminating sharp directional changes and reducing the risk of blockages. Solvent Weld Connections: Engineered for solvent cement jointing on all three sockets, forming a permanent, 100% watertight, and leak-proof chemical bond. Durable uPVC Construction: Manufactured from high-grade, impact-resistant uPVC designed to handle hot discharge water, commercial detergents, and household waste chemicals without degradation. Clean White Aesthetics: Finished in crisp white uPVC to seamlessly match standard indoor domestic waste pipework, bathroom fit-outs, and utility installations. Full Statutory Compliance: Fully compliant with BS EN 1455-1 standards, ensuring dependable performance for internal soil, waste, and sanitary drainage applications.
50mm Solvent Straight Connector (Soil & Waste) - White - W3100
Key Features & Benefits Permanent Solvent Weld Joint: Engineered for precision socket fitment with solvent cement, creating a strong, leak-free, welded joint for internal waste systems. Durable PVC-U Construction: Manufactured from high-grade PVC-U for outstanding chemical resistance, high impact strength, and long-term durability. Smooth Internal Bore: Ensures optimal flow performance, preventing debris buildup and reducing the risk of blockages in 50mm waste lines. Full Standards Compliance: Manufactured in the UK to BS EN 1566-1 / BS EN 1329-1 standards, ensuring full compliance with UK building regulations for domestic and commercial soil & waste drainage. Clean Aesthetic: Crisp white finish designed to match standard 50mm white plastic waste pipe installations in kitchens, bathrooms, and utility spaces.
50mm to 32mm Solvent Socket Reducer
Key Features & Benefits Precision Step-Down Reduction: Safely transitions a 50mm waste pipe run down to a 32mm pipe line in internal soil and waste installations. Permanent Solvent Weld Joint: Engineered for solvent cement welding, creating an airtight, leak-proof, and permanent chemical bond. High-Impact PVCu Construction: Manufactured from durable, unplasticized PVC that resists impact, high hot-water discharges, and standard domestic chemicals. Smooth Internal Bore: Designed with a smooth inner wall to ensure optimal flow rates and minimize the risk of waste buildup or blockages. Fully Compliant Standard: Manufactured by Brett Martin in accordance with BS EN 1566 for complete peace of mind and building control compliance.
50mm to 40mm Solvent Socket Reducer White
Key Features & Benefits Precision Size Conversion: Effortlessly steps down a 50mm solvent weld pipe or fitting to accept a 40mm waste line, ensuring a smooth, uninterrupted flow. High-Impact ABS Construction: Manufactured from tough, high-grade Acrylonitrile Butadiene Styrene (ABS) for long-term durability and resistance to boiling water and household waste liquids. Permanent Solvent Weld Joint: Engineered for a tight solvent weld connection using standard ABS solvent cement, creating a leak-proof, permanent chemical bond. Kitemarked Quality Assurance: Fully compliant with relevant British and European standards for domestic and commercial waste drainage systems. Clean White Finish: Clean, high-gloss white finish designed to match standard internal waste pipework and visible sanitary installations.
5kg Gaslight Patio Gas *Refill Only*
Please note: This is for a refill only. If you require a new bottle and don't have one to swap, an additional fee of £58.84 inc VAT will occur. 5kg Gaslight Patio Gas Lightweight, Safe, and Transparent. Perfect for patio heaters and small BBQs, our 5kg Gaslight bottle is designed for convenience, safety, and ease of use.
An 8mm Compression Equal Tee is a type of plumbing and pipe fitting designed to connect three pipes of equal diameter (8mm) in a T-shape configuration. It is commonly used in water, gas, and hydraulic systems where a secure, leak-free connection is required. Features: Material: Typically made of brass, copper, or stainless steel for durability and corrosion resistance. Size: 8mm compression fittings for equal pipe connections. Design: T-shaped fitting with three compression ends for equal distribution. Connection Type: Compression fittings allow for a secure and easy installation without soldering or welding. Usage: Suitable for plumbing, heating, refrigeration, and pneumatic applications. Sealing Mechanism: Utilizes compression rings (olives) and nuts to form a tight seal when tightened.
An 8mm Solder Ring Equal Tee is a plumbing fitting typically used for connecting three sections of pipe in a T-shape configuration. The "8mm" refers to the pipe size the tee is designed for, indicating the internal diameter of the pipes it can be used with. The "Solder Ring" indicates that the fitting has a pre-installed ring of solder inside the fitting. This solder melts when heated with a torch during installation, creating a strong, leak-free connection between the pipe and the fitting. The solder ring is particularly useful for ensuring a uniform, reliable joint without the need for additional flux. Key features: Size: 8mm, compatible with 8mm diameter pipes. Material: Typically made of copper, which is resistant to corrosion and commonly used in plumbing systems. Connection type: Soldered joint, which requires heating the solder ring to create a seal. Application: Used in residential or commercial plumbing for water supply systems.
8mm Straight Compression Coupling
An 8mm Straight Compression Coupling is a type of pipe fitting used to connect two sections of 8mm diameter tubing or pipe in a straight line without the need for soldering or welding. It is commonly used in plumbing, gas, and hydraulic systems. Features & Benefits: Material: Typically made from brass for durability and corrosion resistance. Design: Straight inline coupling with compression fittings on both ends. Ease of Use: No special tools required; tightened using a standard wrench. Leak-Free Connection: Uses compression olives (ferrules) to create a secure, watertight or airtight seal. Applications: Suitable for water, gas, and oil systems, as well as pneumatic and hydraulic applications. Reusability: Can be disassembled and reused if needed.
AP110 White Plastic Clip Fit Access Panel 115x165mm
Frame Fitting Size - 115 x 165mm Clear Opening Panel Size - 100 x 150mm Overall Panel & Frame Size - 135 x 185mm Door Type - Clip Fit Timloc Product Code - AP110
AP150 White Plastic Hinged Access Panel 155x235mm
Frame Fitting Size - 155 x 235mm Clear Opening Panel Size - 140 x 220mm Overall Panel & Frame Size - 195 x 275mm Door Type - Hinged Timloc Product Code - AP150
Brass Compression 15mm x 1/2"Female Iron
A Brass Compression 15mm x 1/2" Female Iron Fitting is a plumbing component used to connect a 15mm copper or plastic pipe to a 1/2" female threaded fitting. It features a compression end that creates a secure, leak-proof connection without the need for soldering and a threaded female iron end for connection to male-threaded fittings or appliances. Key Features: Material: Durable brass construction for corrosion resistance and longevity Size: 15mm compression end x 1/2" BSP (British Standard Pipe) female threaded end Usage: Ideal for domestic and commercial plumbing, including water supply systems Installation: No soldering required; simply tighten the compression nut for a secure fit Application: Used in plumbing systems to connect copper or plastic pipes to threaded fittings, valves, or appliances
Brett Martin 32mm 135° Solvent Obtuse Bend White W1130 | Beatsons
Key Features & Benefits Precision 135° Directional Control: Provides a precise 135° (45° offset) angle change to navigate around structural obstacles without slowing waste water flow rate. Permanent Solvent Weld Joint: Engineered with smooth internal sockets for quick, permanent chemical welding using standard ABS/PVC solvent cement. High-Gloss UV-Stabilized Finish: Manufactured from durable ABS in a brilliant white finish that matches standard sanitary pipework and resists discolouration. Smooth Internal Bore: Prevents waste build-up, reducing the risk of blockages and maintaining optimal fluid dynamics across domestic waste runs. Full Standard Compliance: Manufactured by Brett Martin to BS EN 1565-1 requirements, ensuring complete compatibility with standard 32mm plastic waste systems.
BZP Hose clip (Fits 8mm and 12.5mm hoses)
Secure your connections with this durable, Bright Zinc Plated (BZP) hose clip. Designed for versatility, this clamp adjusts to fit hose diameters ranging from 8mm to 12.5mm, making it an ideal solution for automotive, workshop, and DIY plumbing applications.
MAC-7A 14° Angle MACFIT WC Connector
The McAlpine MAC-7A is a 14° angled MACFIT WC connector designed to facilitate the connection between a toilet pan and a soil pipe, especially in installations where a straight connector isn't suitable. Its angled design provides flexibility, accommodating various plumbing configurations. Key Features: Compatibility: The connector has a 97-107mm inlet, making it suitable for all pan spigots within this range. The outlet fits 4"/110mm inside diameter of both PVC-U and cast iron soil pipes. Construction: Manufactured from Ethylene-Vinyl Acetate (EVA), a durable and flexible plastic material, it ensures a secure and long-lasting connection. Seal Technology: Incorporates a patented 'lock ring' inlet seal, providing a superior and tighter connection to the WC pan outlet, reducing the risk of leaks. Aesthetic Design: The white finish matches standard sanitaryware, ensuring a cohesive look in bathroom installations. Standards Compliance: Complies with BS 5627:1984 standards, ensuring reliability and quality in plumbing applications. The MAC-7A's 14° angle is particularly useful when the soil pipe is not directly aligned with the toilet pan outlet, allowing for a smoother and more efficient installation. Its design simplifies the installation process, making it a reliable choice for both new installations and refurbishment projects.
Manrose 100mm (4") Brown Multi Fit Cowled Outlet - Dual Fitting - 41031
Manrose 100mm (4") White Louvred Vent Grille — Exterior/Interior
Key Features & Benefits Fixed Louvred Blade Design: Angled fixed slats allow efficient air discharge while shielding extraction openings against wind-driven rain and outdoor weather. Dual Exterior & Interior Compatibility: Designed for surface-mount installation on outer masonry, timber soffits, or internal walls and ceilings. Universal 100mm (4") Fit: Direct push-fit circular spigot integrates cleanly with standard 100mm rigid ducting, flexible PVC hose, and axial extraction fans. Durable UV-Stabilized Thermoplastic: Molded from high-grade, impact-resistant white plastic that resists yellowing, cracking, and weathering over time. Low Resistance Airflow: Maintains optimum extraction capacity for bathroom, ensuite, utility, and kitchen ventilation setups without straining fan motors.
Manrose 100mm (4") White Multi Fit Cowled Outlet - Dual Fitting - 41031
Manrose 3M x 100mm PVC White Flexible Ducting Hose - 1020
Product Code : 1020
Key Features & Benefits Removable Screw Cap Access: Features an airtight threaded cap that unscrews easily for clearing blockages, rodding, and routine system inspections. Leak-Proof Solvent Weld Joint: Designed to solvent weld directly into standard 40mm plastic waste pipe runs to form a permanent, watertight joint. Durable ABS Construction: Manufactured from high-impact ABS plastic for excellent strength, rigidity, and resistance to hot water and household chemicals. Clean, Compact Profile: White finish pairs seamlessly with matching 40mm domestic waste pipework systems in kitchens, bathrooms, and utility spaces. Fully Compliant: Manufactured to BS EN 1455-1 standards to ensure reliable long-term performance in domestic and commercial soil and waste installations.
STW4-R 70mm CP Plastic Shower Trap
The STW4-R is a reliable, high-performance shower waste solution designed for modern shower trays. Combining a durable plastic body with a sleek, polished aesthetic, it ensures efficient drainage while maintaining a low-profile look in your bathroom. Key Features Premium Finish: Features a high-quality Chrome Plated (CP) plastic cover that provides a mirror-like finish, resisting corrosion and tarnishing. Optimal Drainage: Designed specifically for shower trays with a 70mm waste hole, ensuring a secure, leak-free fit. Easy Maintenance: The trap includes a removable grid/cover, allowing for quick access to clear hair and debris without needing specialized tools. Durable Construction: Manufactured from high-temperature polypropylene, making it resistant to common household chemicals and hot water. Compact Design: The space-saving "shallow" profile is ideal for installations where floor depth is limited.
WC-CON8 WC Pan Connector 110mm 90° Bend
The WC-CON8 WC Pan Connector is a 110mm 90° bend pan connector designed for connecting a toilet (WC) pan outlet to a soil pipe. It features a durable and flexible construction, typically made from high-quality plastic, to ensure a secure and leak-free connection. Key Features: 90° Bend: Ideal for installations where the waste pipe needs to change direction. 110mm Diameter: Standard size for compatibility with most toilet outlets and soil pipes. Flexible & Secure Fit: Ensures a tight, leak-proof connection. Durable Material: Made from strong, long-lasting plastic for reliability. This connector is commonly used in plumbing installations where space constraints or pipe routing require an angled connection.