Alumininum Foil Tape 50mm x 45.7m
Heat and Light reflective Aluminium Foil Tape, heat resistant to 180°C, Flame Retardant to Class O. Excellent moisture resistance, ideal for use as a vapour barrier between foil faced insulation panels in roof and wall applications, duct sealing on all types of air conditioning and ventilation and protecting wires and pipes from heat.
EcoTherm Inno-Torch Flat Roof Insulation
Part of the Building Innovation product range, Inno-Torch flat PIR boards offer a thin and durable insulation solution for flat roofs. The boards are suitable for use with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems, on concrete, timber or metal decks. With thermal conductivities as low as 0.024 W/mK, Inno-Torch boards can allow you to achieve target U-values with slim constructions. Can be fitted with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems Suitable for use on new and existing concrete, timber and metal decks Lightweight PIR insulation boards are easy to transport, cut and install
Isover APR 1200 Acoustic Partition Roll
Key Features Summary Exceptional Sound Reduction: Designed specifically to reduce airborne sound transmission in internal stud walls, timber joist floors, and acoustic partition systems. Pre-Slabbed for Easy Fitting: Supplied pre-split to friction-fit standard timber and metal stud centres (600mm) without slump or sagging over time. Dual Thickness Options: Available in 50mm and 100mm variants to meet specific Building Regulations (Part E) acoustic requirements. Non-Combustible (Euroclass A1): Achieves the highest possible fire rating for complete peace of mind and building compliance. Sustainable Glass Mineral Wool: Manufactured using up to 80% recycled glass, making it an eco-friendly choice for domestic and commercial projects.
Isover Spacesaver Loft Insulation Roll
Isover Spacesaver is a high-performance glass mineral wool insulation roll, designed for easy installation at ceiling level between common joist spacings. Pre-perforated for flexibility and supplied in extra-long roll lengths, it reduces on-site handling and installation time. The range also includes Spacesaver Lite, Ready-Cut, and Spacesaver Plus options for varied project needs.
Mannok Therm QL PIR Insulated Plasterboard 2400x1200mm
Mannok Therm Laminate-Kraft / MLK PIR is a high performance, fibre free insulated board, with a kraft paper facing on one side and plasterboard bonded to the other side. Mannok Therm Laminate-Kraft / MLK PIR insulation is ideally suited to be used under rafters to reduce the overall heat loss through the roof and eliminate thermal bridging through the rafters. With the additional benefit of its paper facer, Mannok Therm Laminate-Kraft / MLK PIR insulation is also suitable for use in dry-lining applications fixed in place using dot-and-dab adhesive or mechanical fixings. *Mannok Therm Laminate-Kraft / MLK (previously Quinn Therm QL-Kraft) Total Thicknesses available: 37.5mm, 50.5mm, 62.5mm, 72.5mm, 82.5mm, 92.5mm, (select from the drop down menu) Plasterboard Thickness: 12.5mm Board Size: 2400mm x 1200mm Coverage: 2.88m per board Thermal Conductivity: 0.022w/mk Facing: Paper facing on one side & plasterboard bonded to the other side
Recticel Eurothane® GP PIR insulation board is a lightweight, high-performance rigid foam board for pitched roofs, framed and internal walls, floors and ceilings. Each 2400 x 1200mm board is faced on both sides with a gas diffusion-tight multilayer foil and delivers a thermal conductivity of just 0.022 W/mK, so you can hit strict U-value targets with a thinner build-up than mineral wool or EPS. Straight edges allow tight, easy butt joints, and the board is quick to cut, handle and install on site. Rated Euroclass F to EN 13501-1 and BBA certified (25 to 160mm), it's a trusted alternative to Celotex and Kingspan PIR boards. Stocked in 25, 50, 70, 90, 100, 140 and 150mm thicknesses. In stock now for click & collect.
Warmline XPS Insulated Plasterboard
Warmline XPS Insulated Plasterboards are designed as a simple and effective way to improve the thermal efficiency in walls and roof dwelling applications. They are fully applicable with Part L of building regulations. Square edge insulated plasterboard. Technical Specifications Product size: 1200mm x 2400mm m2 Per Board: 2.88 Overall (Foam*) Thickness: 27mm (17.5mm*), 35mm (25.5mm*), 40mm (30.5mm*), 45mm (35.5mm*), 55mm (45.5mm*) Foam Thickness: 17.5mm, 25.5mm, 30.5mm, 35.5mm, 45.5mm Plasterboard Thickness: 9.5mm Edge: Square Edge Thermal Conductivity: 0.034 or 0.035 W/mK Thermal Resistance: 0.56 m2k/W to 1.4 m2k/W