Features and Benefits - Dimensions - 215 x 102.5 x 65mm - Water Absorption - ≤10% - Durability - F1 - Size Tolerance Mean & Range - T2 & R1 - Configuration - Vertically Perforated - Active Soluble Salts - S2 - Compressive Strength - ≥60 N/mm² - Gross Dry Density - 1450 kg/m³ - Pack Size - 452
Concrete Common Brick Smooth With Frog
Key Features Summary High Structural Strength: Engineered from high-density, dense concrete for load-bearing reliability in general construction. Deep Frog Design: Features an indented top face ("frog") that holds mortar to increase joint bonding strength and overall wall stability. Excellent Frost & Moisture Resistance: Fully compliant for use above and below the Damp Proof Course (DPC) in freeze-thaw risk conditions. Smooth Standard Finish: Offers consistent dimensions and flat, smooth faces for clean alignment and uniform mortar lines. Versatile Construction Use: Suitable for internal load-bearing walls, foundations, partition walls, and background masonry for rendering. Frequently Asked Questions (FAQ) Should the frog face up or down when laying? Standard bricklaying practice requires common bricks to be laid frog side up. Filling the entire frog with mortar ensures the finished wall achieves its full structural strength, load-bearing capacity, and sound insulation properties. Can these concrete commons be left exposed externally? While concrete commons can be used externally, they are primarily structural bricks. They are generally specified for background work, foundations, and walls that will be rendered, plastered, or face-clad. For visible decorative facades, a dedicated facing brick is usually recommended. How many concrete common bricks are needed per square metre? Using standard 10mm mortar joints, you will need approximately 60 bricks per square metre for a single-skin wall.
Give your construction project a sleek, contemporary aesthetic with Edenhall Smooth Faced Concrete Facing Bricks. Specially engineered for exterior facades, extensions, and modern architectural boundary walls, these premium concrete bricks combine high-performance structural durability with a clean, crisp, untextured finish. Manufactured using dense, high-quality aggregates blended with colorfast iron oxide pigments, these bricks offer excellent color longevity that resists fading over time. Whether you are building a modern residential property or a commercial development, Edenhall smooth facing bricks provide a uniform finish with sharp lines that elevate any external facade.
Engineering Brick Class B Red Perforated
Key Features Summary High Structural Strength: Rated to a minimum compressive strength of 75N/mm2, making it ideal for heavy load-bearing structural applications. Low Water Absorption: Maximum water absorption rate of 7%, offering exceptional resistance to dampness, frost, and ground moisture. Smooth Perforated Finish: Features a classic red smooth face with a perforated core that reduces weight and ensures strong mortar bonding. Severe Weather Resistance: Rated F2 / S2 for frost resistance and low soluble salt content, making it suitable for exposed masonry work. Fully Standardized: Manufactured to BS EN 771-1 standards for consistent size, quality, and dependable structural performance.
Powder Mortar Tone is formulated from best quality oxide pigments for permanently colouring all types of mortars, rendering, concrete and pointing. The pigments disperse easily into the mix to give a uniform shade for each mix batch. Shading can be adjusted to provide a wider variety of colour depths. Permanently colours cement based products - light fast pigments will not fade. Improves workability/trowelability - contains a plasticizer. Chloride free (chloride ion content < 0.1%). Reduces bleeding/segregation. Inhibits efflorescence.
Beatsons 7N Concrete Blocks are strong, durable concrete masonry units designed for a wide range of load-bearing and general construction applications. Available in 100mm and 140mm widths, these blocks provide a compressive strength of 7N/mm², making them ideal for structural walls, foundations, cavity wall construction and internal partitions in residential and commercial building projects.