110mm Double Solvent Weld Short Boss Pipe

Key Features Summary Dual Boss Connections: Features two opposite boss entry sockets, allowing two separate waste runs (such as basins, baths, or appliances) to tie into a main 110mm soil stack at a single point. Solvent Weld Jointing: Offers a sleek, permanent, and leak-proof solvent weld connection on both ends for maximum long-term reliability. Compact Short Design: Engineered with a shortened barrel length to save valuable space in tight soil stack installations, boxed-in pipe runs, and floor voids. High-Quality PVC-U Construction: Manufactured from durable, high-impact PVC-U designed to withstand hot water discharge and household chemicals. Fully Compliant: Manufactured in the UK to BS EN 1329 standards, ensuring full compatibility with standard 110mm soil systems.   Frequently Asked Questions (FAQ) What adaptors do I need to connect waste pipes to the BS425 boss? To connect a waste pipe, drill out the closed face inside the boss entry with a suitable hole saw, then insert a standard 110mm solvent weld rubber or rigid boss adaptor (available for 32mm, 40mm, or 50mm pipe sizes). Can I use solvent weld cement on this fitting? Yes. The BS425 is designed for solvent weld installation. Clean both the pipe exterior and the inside socket of the fitting using a suitable pipe cleaner, apply solvent cement evenly to both surfaces, and push together for an immediate, permanent bond. Is this fitting compatible with other brands of 110mm soil pipe? Yes, provided the existing pipe system is manufactured to standard UK dimensions (BS EN 1329 / BS EN 1401 for 110mm soil and underground drainage), the Brett Martin BS425 will connect seamlessly.

110mm Soil Pipe To 160mm Drain Connector

Key Features Summary Seamless Pipe Adaptation: Efficiently transitions a standard 110mm soil or waste pipe into a larger 160mm main underground drainage system. Level Invert Design: Keeps the bottom (invert) of both pipes at the same level to maintain consistent gravity flow and prevent sediment build-up. Push-Fit / Solvent Weld Compatibility: Fits directly into a 160mm ring-seal socket or spigot end while accepting standard 110mm plastic soil pipe. Durable uPVC Construction: Manufactured from high-grade, impact-resistant terracotta uPVC built to withstand ground pressure and chemical exposure. Fully Certified: Manufactured in the UK to BS EN 1401 standards for underground gravity drainage and BS EN 1329 for soil and waste systems.   Frequently Asked Questions (FAQ) What does "level invert" mean, and why is it important for drainage? A level invert adaptor is designed so the inside bottom surfaces of both the smaller (110mm) and larger (160mm) pipes sit flush with each other. This prevents water from "dropping" or pooling at the step-up point, ensuring smooth, uninterrupted flow and reducing the risk of solid waste settling and causing blockages. How do I install the Brett Martin BS423 connector? The 160mm end inserts directly into a standard 160mm ring seal socket or fitting using pipe lubricant. The 110mm socket end receives your incoming 110mm soil pipe. Ensure the offset/flat side of the adaptor is positioned at the bottom to keep the pipe inverts aligned correctly.

110mm Underground Drainage Double Socket 45° Bend

Key Features Summary Smooth 45° Directional Change: Designed to redirect 110mm underground pipe runs at a 45-degree angle without restricting waste flow. Double Socketed Joints: Features rubber ring push-fit sockets on both ends, allowing fast and secure connections between plain-ended 110mm drainage pipes. Captive Seal Technology: Includes Brett Martin’s market-leading captive ring seals that prevent dislodgement during installation, guaranteeing a watertight, leak-free joint. Heavy-Duty uPVC: Manufactured from high-impact, corrosion-resistant uPVC designed to withstand subterranean soil pressure and thermal expansion. Fully Certified: Kitemarked and compliant with UK standard BS EN 1401-1 for gravity foul and surface water drainage systems.   Frequently Asked Questions (FAQ) What is the difference between a double socket and a single socket 45° bend? A double socket bend features a female push-fit socket on both ends, making it ideal for joining two plain-ended (uncapped) pipes together. A single socket bend has one socket and one spigot (male) end, allowing it to insert directly into another socketed fitting or pipe length. Do I need to use lubricant when fitting this bend? Yes. To ensure a smooth push-fit connection and prevent the rubber captive seal from twisting or tearing, apply a generous layer of silicone pipe lubricant to the chamfered end of the 110mm pipe before inserting it into the socket. Is this fitting compatible with other brands of 110mm underground drainage? Yes, Brett Martin 110mm underground drainage fittings are manufactured to BS EN 1401-1 standards, making them fully compatible with other major UK plastic drainage brands (such as Osma, Polypipe, and FloPlast) that adhere to the same British Standard.

Brett Martin Kitemark 3m Pipe 110mm Plain End

Brett Martin Kitemark 3m Pipe 110mm Plain End

Brett Martin Kitemark 3m Pipe 110Mm single socket

Brett Martin Kitemark 3m Pipe 110Mm single socket

Brett Martin Kitemark 6m Pipe 110mm Plain End

Brett Martin Kitemark 6m Pipe 110mm Plain End

Brett Martin Kitemark 6m Pipe 110mm Single socket

Brett Martin Kitemark 6m Pipe 110mm Single socket

Brett Martin Lubricant Gel 0.5Kg

Brett Martin Lubricant Gel 0.5Kg

Brett Martin Perforated Pipe 110Mm X 6M

Brett Martin Perforated Pipe 110Mm X 6M

Brett Martin Solvent Cement 250ml

Brett Martin Solvent Cement 250ml

Brett Martin Solvent Cleaner 250ml

Brett Martin Solvent Cleaner 250ml

Kitemark 3m Pipe 160mm Plain End

A 3-metre long, 160 mm diameter underground drainage pipe from Brett Martin. Plain-ended (i.e. no socket) — suitable for joining with appropriate couplers or fittings. Manufactured in the UK, under quality standards (ISO 9001:2015) and certified to the relevant standards (BS EN 1401-1 / BS EN 13476-2). Typical Use Cases   Installing new underground drainage for houses, extensions or developments. Replacing or extending existing drainage/sewer pipework. Connecting surface water or foul water drains to soakaways, mains sewers, or treatment systems. Civil-engineering or commercial drainage installations where reliable, standards-certified underground pipework is needed.

Kitemark 3m Pipe 160mm Single Socket

The Brett Martin B6603 is a 160 mm diameter, 3-metre long underground drainage pipe with a single-socket (ring-seal) end. It is part of Brett Martin’s “Underground Drainage” range and is designed for robust, long-lasting sewer and surface water drainage systems.