The Rexener Polar hot tub benefits from low operating costs. Its economical pool has a relatively low water volume of ca. 1,300–1,500 litres. Thanks to its advanced design, the pool still feels spacious.
The Rexener PR200 water heater can heat the water from +7 degrees to +38 degrees in less than two hours. This means the heating cost is as low as 4 euros! When the Rexener PR200 water heater is running, its fuel consumption is 2L/hour. However, its thermostat will turn the heater off when the water reaches the right temperature. When the water temperature falls by 2–4 degrees, the heater will turn itself back on.
Our hot tub kits come with a 3-year warranty, and our fibreglass pools are guaranteed for up to 10 years
Volume: 1300-1500 litres
Persons: max. 8
Dry weight: approx. 200kg
Outer dimensions: 190 x 190 x 110 cm (width x depth x height)
Inner dimensions: 223 cm
Leg space diameter: 77 cm
Heating type: Rexener PR200 water heater
Water heater weight 43 kg
Power of the water heater: 20 kW
Water heater consumption: 2 L/h
Fuel: Biodiesel, diesel or red diesel
Power consumption: 80W
Water heater dimensions: 38 × 58 × 86 cm (width x depth x height)
Thermostat: 0-45ºC
Water drainage: There is a drainage plug at the bottom to make draining the pool easy. On the right side of the pool, viewed from the stairs, there is an exhaust valve from which the water drains away. If you wish, you can also connect a 25 mm water hose to divert the water.
